MysteryMakers

Ok, this was also planned for a while… so here it is! The Xena: Warrior Princess Weapons Pack Included in the pack: Sword Light/Dark Chakram Balanced / Yin-Yang Chakram And each of these comes with quite a few options, so let me go through some of the features. Sword Printable structural-strength co

Well… let’s start the month 😄 Sometimes it’s worth waiting for good references—and I’m really glad I did this time. So, I present to you a very accurate representation of the dual vibroswords, as seen in the trailers and behind-the-scenes footage from upcoming The Mandalorian & Grogu. You know the

Before I start — I need your help: Someone sent me a video showing the new Mando weapons/blasters, but I can’t seem to find it anymore. The good soul who sent it to me — if you’re reading this — would you be so kind as to send it again? Thank you! Ok, back to this release. While I was working on the

Ok guys, by now you’re probably getting enough of me already, but I really do appreciate the immediate feedback on all of this — so I’ve got a few more things for you today! I added 2 more options, so now we have: 1 – LEDs on the side option 2 – LED strip in the middle – the blade ends are trimmed s

This was a CRAZYYYY RIDE :D Just wrapped up the Predator Badlands Sword and I’ve been at it for 10 days straight, day and night. As always, my three goals were the same: easy to print, easy to assemble, and easy electronics for everyone no matter the skill level. There is a bit of soldering involved

Thank you for the patience guys, the new sword from Predator Badlands is almost done, i have been spending 5 days on the details ( not yet done) , but yeah you can expect all the usual goodies you get from me - functional, led's, easy assembly, non funtctiona... well, you know :D

Here it is, guys — a detailed look into my Rumi’s Sword design! If you have any questions about the build, feel free to drop them in this post and I’ll help you out. This one’s pretty straightforward but features a unique light-up approach I haven’t seen done anywhere else yet. I just wanted to show

Aaaand it’s done! :) Test prints are complete, and all the parts fit together nicely. I just need a little more time to record everything for you so you can see it in action — but I didn’t want to keep you waiting, so here it is: Light-up version of Rumi’s Sword from K-Pop: Demon Hunter! As mentione

As you might have guessed, I’m working on Rumi’s sword from K-Pop: Demon Hunter! But I couldn’t just make regular 3D models and leave you to figure it all out — so I went a bit overboard and decided to solve all the requests you guys had in the FB group. The main requirements/challenges were: It has

Two more releases today—and that officially wraps up the Daywalker set! Before I jump into the details: Yes, more hologram animations are coming. And yes, there will be an animation repository on Discord for all of them. I’ve just got a lot going on right now, but it’ll be added within the next 3 da

This one really put my engineering skills to the test. I spent a lot of time figuring out a mechanism that’s simple to print but actually works—and I’m really happy with how it came together. What’s included: STL files 3MF files Functional version Non-functional version Build guide video For accurac

A sneek peek of the Daywalker Blade with Functional Mini Blades Mechanism! I’m almost done with the design of the Daywalker Blade, and I’m seriously excited about how it’s turning out! 😎 i've been scratching my brain on this one for quite some time now on how to make it easy to print and easy to wo

I can't help but get back to Lord of the Rings items here and there, so this time I have something special: the Strider's sword kit, which comes with a sword sheath and a hunting knife. The sword itself is straightforward. It features my custom press-fit strips, which eliminate the need for extra ha

Aaaaaaand i wrapped up Faramir’s sword along with the small pendant piece featuring the symbol from the hilt guard of his sword. I followed the same workflow as with Boromir’s gear—there’s a press-fit version with alignment strips for easy assembly, and a fully combined model that’s ideal if you pla

Boromir’s sword is now finished! As with the dagger, I used official Weta references and auction listings from the original props to ensure accuracy. For flexibility in printing, I created both a press-fit version with alignment strips for easy assembly and a fully combined version that works great

I just finished modeling Adam’s sword from the upcoming Masters of the Universe movie for 3D printing! This one has a special feature: a press-fit insert system designed for structural strength and easy assembly. No need for aluminum rods or glue—just a precise fit that locks in place. If the pressu

I did promise i will make some custom predator weapons so here's the first one :) A short sword inspired by the Yautja culture, blending their iconic aesthetics with subtle nods to samurai tradition. While working on this, I envisioned the sword as something a Predator warrior would have brought wit

DOWNLOAD LINK AT THE END OF THE POST: And the last month of the year is here :) Starting "simple" with another LOTR item - this time THe Ringwraith swords. I know there might be multiple references, but i did manage to trace down an auction page that claims to sell the screen used ones, and i used t

oh boy :D I wanted to make this as I thought it would be a quick 2 day project. well, it's been 8 days now , haha :D but thats my own fault bcs i always add several version and take it too far, so i have to step back and simplify :D Buuuut printability is the key here. Yes, it's the new Deadpool's k

Just in case you were worried, nope, i didn't stop making LOTR stuff :) I wanted something a bit more challenging one this time, but with lots of available references to work with, and this was without a doubt one of the most complex sword models I had the pleasure of 3d modeling, so this is now THE

We can't get enough LOTR stuff, can we ? :) I really love the aesthetics of the props , so this time I have picked one with a bit of complicated shapes. It was very fun figuring those out , how they flow and in the end connect , so I hope you will like it :) It's Balin's sword from the Hobbit :) The

For this months Iconic movie props i've decided to go with LOTR :) The sword of the Witch King of Angmar. I did my best to recreated the ornament details, and as always i added some little extras: 1 - both textured and clean grips ( if you wish to use real leather) 2 - pre-sliced blade with mounting

Ho Ho Ho :) There is rumour that Santa is actually a big fan of Anakin, and everyone that ends up on his noughty list will be dealt with a CANDY CANE LIGHTSABER !!!!! :D Just joking of course, but I just had to make a Christmas themed lightsaber :) As always I designed it so its easy to print, and a

A quick Sunday sculpt, and one of the newest items we got to see in the last episode of Ahsoka, The blade of Talzin. This blade is rather la A quick Sunday sculpt, and one of the newest items we got to see in the last episode of Ahsoka, The blade of Talzin. This blade is rather large , so it split i