mz4250

Hello friends! Today I had fun working on the Satyrs from the new Monster Manual! I made a male and female version. For the female I went with a frolicking and joyful lady just enjoying nature plus the good company of the party. The male however is using the "mockery" ability that is in the Satyr st

Hello friends! Today I got back to working on the new Monster Manual minis and made the Scarecrows! I made one base model then after rigging it made three poses given these usually attack in groups. Some tabletop diversity is always nice to have. For each version I made a regular version that has al

🦃 Hello November! 🍂 Last month was a fun and productive month! I loved working on the spooky minis from Ravenloft the Horror Within as well as spooky Patreon requests! I made 47 minis in total and you can see them all in the gallery above. UK users can see them here. The free stl links are under e

Today I decided to work on both requests and minis I really wanted to make. So today I worked on: Darklord Dr Viktra Mordenheim - the darklord of Lamordia, she's basically female Dr Frankenstein. She's created terrifying flesh golems trying to reach the ultimate goal of perfection. This was a great

Hello friends! Today I worked on some spooky requests and made: Infested Tortle Circle of Spores Druid - any creature completely overtaken by fungi is terrifying. One that actively embraces it is far worse lol. This was a fun druid to sculpt up and I really enjoyed making all the little fungal detai

Hello friends! Today I have more spooky Ravenloft minis ready for you! I made: Strahd Skeleton - this skeleton is what remains of a follower of a vampire that was not found worthy enough to even be made into a familiar. They're vampiric swords are said to house the blood of their victims that vampir

Hello friends! Today I made more spooky minis from Ravenloft the Horrors Within and made: Darklord Hazlik - this mad wizard overlord of Hazlan feeds into the horrifying nature of this realm with his own magical abominations and bizarre spellcraft. This was a great sculpting and modeling project and

Hello friends! Today I have more spooky Ravenloft minis for you! I made: Darklord Ankhtepot - this terrifying mummy lord controls the world of Har’Akir, a vast land of deserts, tombs and mysterious labyrinths. I actually used this fella in one of my spooky one shots and the whole setting is a lot of

Thank you everyone for your amazing submissions! These are really terrifying in so many ways haha. But now its time to vote! You can see all submissions here. Users in the UK can see them here. Prizes are: 1st - A $500 Anycubic Gift Card! 2nd & 3rd - a custom 3D modeled mini 4th & beyond - a sticker

Hello friends! Today I worked on some really gross requests lol Giant Tick - This horrifying giant bug is probably the worst of the worst. During my Infantry days I hated having to do tick checks so this is bringing back some nightmares for me lol. Given its simplicity you can print this as is in FD

Hello friends! Today I worked on more Patreon requests that reflect the spooky theme of the month! I made: Harrow Hound - this creepy undead doggy is a bit unsettling to look at, but I'm sure is still a very good fella that deserves scritches and snacks. For FDM printing you'll get your best results

Hello friends! Today I had a wild time sculpting up the Greater and Less Star Spawn Emissaries from Ravenloft the Horror Within! These were a lot of fun. I love all the little horrifying details on them haha. When it comes to FDM printing the Lesser Star Spawn Emissary is a little complex but if you

More spooky minis for you all today! Add to the Ravenloft Horrors Within collection I made: Vampire Nosferatu - these are feral vampires that will consume anything that has blood, be it vermin or people. After feeding they'll present some semblance of intelligence, but still be as deceitful as their

Hello friends! I just found out you can make discount codes on this site lol. Here is a 50% Discount code for any of my Tiers that's good until the end of the month. It's for new subscribers and returning patrons: C770F I'll probably do this more often around the year. Its neat. But anyway I appreci

Hello friends! Spooky month continues! Today I worked on: Darklord Mother Lorinda - Lorinda is a terrifying Ravenloft darklord who is the epidemy of folklore horror. Imagine a creature that is pure Midsomer... yeah that's her lol. She was a great sculpting and modeling project! For FDM printing you'

Hello friends from Upstate NY! The Sheep and Wool Festival goes well and Jen says hi. I did get some down time last night and this morning so I made some more spooky requests! I made: Star Angler - from the campaign Vecna Eve of Ruin these are terrifying space angler fish that prowl Wildspace. It wa

Its time for another 3D printing and painting contest! This month's theme will be all things that are spooky! Undead, tentacles, aliens... its all good! As long as it goes bump in the night and makes you scream its welcome in this contest :D Rules are as follows: Post your submission below with an i

Hello friends! Today I worked on more spooky minis from Ravenloft and made: Bodytaker Plant - this was a fun and wild project to sculpt up. It kind of reminds me of Biollante from the Heisei Godzilla movies hehe. For FDM printing I made a version that's more friendly. You can use a hot hair dryer or

Hello friends! Spooky month continues! Today I worked on the Wraiths from the new Monster Manual! Given these come in groups most of the time, I made a variety of poses to add some tabletop diversity. It was a nice mix of sculpting and modeling work and I'm happy with how spooky they came out :D Imp

Hello friends! Today I worked on more spooky minis from the new book Ravenloft the Horrors Within! I made: Darklord Azalin Rex - the Darklord of Darkon, Azalin Rex is more focused on escaping the Domains of Dread rather than ruling over them. This was a great sculpting and modeling project and I'm h

Hello friends! Today I worked on more Request Board minis and made: Witch 4 - this was a fun request for a witch with a peg leg and pipe. It was a nice mix of sculpting and modeling work. I'm happy I have a base hag model that can help save some time haha. For FDM printing I would print her on her b

Hello friends! Today I worked on spooky requests from my Request Board! I made: Slenderman - this terrifying cryptid was an excellent sculpting and modeling project! I made two versions. One has spectral tentacles bursting out of its back, while the other one is the creepy luring version. You can sw

Hello friends! The winner of last month's contest was the Rat King that I modeled last week. I'm happy to say it printed well! Gave it a nice paint job and its now ready to go. I'm not the greatest painter but I think its ok at least. As for new spooky models today I worked on: Swarm of Zombie Limbs

Hello friends! Today I worked on more spooky minis from Ravenloft the Horror Within! Zombie Beholder Terror - this terrifying take on the Zombie Beholder combines the horrifying undead nature of the original with grafted on creature parts making each tentacle far more dangerous than a normal Beholde

Hello friends! Spooky month continues! Today I worked on: Dark Lord Soth - this is one of the Dark Lords from the new book Ravenloft: The Horrors Within! He rules the land of Sithicus, an elven realm tormented by the undead and shadows of a once hopeful past. This was an excellent mix of sculpting a

Hello friends! The first spooky models of the month are up! Normally on Fridays I work on requests but for fun I also worked on the winner of my most recent poll, the Vampires from the new Monster Manual! I loved working on these two. The female is an armored bulwark ready to destroy anyone that get

🎃 Its Spooky Month! 👻 Hello again friends! First off, thank you all for your continued support! I love making free 3D printable minis for the world to enjoy and you ensure I can do this while keeping a roof over my head. You are all wonderful and generous people! I hope to keep you all invested in

Hello friends! Its Spooky Month! This month I'm going to work on the terrifying creatures from Ravenloft the Horrors Within! I'll also work on some spooky creatures from the new Monster Manual as well as picking the most horrifying requests from the request board. Below is a list of the most terrify

Hello friends! Today I worked on this Salamander leader as well as the new Satyrs! I'm not confident I'll be able to finish the Satyrs today but at least this big fella is done done. The Salamander Inferno Master has more spellcasting abilities than the regular Salamander and is also far more charmi

Hello friends! Today I worked on the the Salamanders! I started with some small touch ups on the Fire Snake from 2014 that didn't actually need much work. But the new Salamander I made from scratch given its different enough from the original. It was a nice mix of sculpting and rigging work. The wor

Thank you everyone for your amazing submissions! These really came out great! But now its time to vote! You can see all the submissions here and for UK users here Prizes are: 1st - A custom 3D modeled, printed and painted mini by me! 2nd & 3rd - a custom 3D modeled mini and Prusa Starter Paint Set!

Hello friends! Today I wrapped up the Sahuagins! For the Priest it was a pretty easy one given I already had the rigged up Sahuagin from last week and just needed a nice pose and shark teeth jewelry. As for the Baron, that was a whole lot of sculpting and rigging work. Still I'm very happy with how

Hello friends! Today I worked on some fun requests! I made: Swordfish - a pretty cool request for another aquatic creature. I don't get these often so I think its neat. For FDM printing this is a little tricky but if you print it in its current orientation and use organic supports it should come out

Hello friends! Today I worked on the underwater raiders, the Sahuagin! I first made the base Sahuagin Warrior of which I can use to make the Priest and Baron next week. It was a nice mix of sculpting and rigging work. I made three versions. The second one is the FDM friendly one. I know that in the

Hello friends! Today I worked on the Rust Monster from the new Monster Manual! I made two versions with the first being similar to the book art, and a more flattened version that is much easier to print in FDM. For the second one you can pretty much print it as is with no supports, but it wouldn't h

Hello friends! So years ago I made a small perk for my $1 patrons. They got access a sample drive with about 400 of my mini models. This included my SRD cleared 2014 Monster Manual collection and some adventurers. ( SRD cleared means they are listed in the Systems Reference Document meaning they are

Hello friends! Today I worked on the little Quasit demons today! I accidentally skipped this fella as I barreled into the Letter R creatures haha. I made a base Quasit model then made three poses. The first and third are dynamic but not FDM friendly. Quasit 2 though is very FDM friendly and will act

Hello friends! Not only did I work on the winner of the Silly Mini poll, I decided to work on the top three! I made: Sir Honkington the Violent - here is the winner of the poll! He was a fun mix of modeling and rigging work. I'm happy I had the Goose already made from previous projects haha. For FDM

Hello friends! Today I worked on: Kobold Bard 2 - this was a fun request for a Kobold Bard who has a look similar to a certain circus kobold haha. For FDM printing print him on his back for the best results. Resin users get the usual presupported files. Full files are in Adventurers - Bards - Other

Hello friends! Last month I made a series of polls with your submissions for my next silly mini model! I got caught up in life so I completely forgot about this next round in voting. My apologies. But anyway, here are the top contenders from the last round of polls. The winner will be modeled on Mon

Hello friends! Today I worked on more requests and made: Blue Glaucaus Atlanticus Dragon - this was a wild request for a dragon version of the Glauscaus Atlanticus sea slug. Aquatic dragons are always cool to work on and this was a fun sculpting project for sure. For FDM printing its pretty big but

Hello friends! Today I have for you the Roper from the new Monster Manual! This was an excellent modeling, sculpting and rigging project. I started by making a hidden Roper, which is basically a large stalagmite with a rather peaceful looking hidden face. I first thought about making a mean looking

Hello friends! Its time for another 3D printing and painting contest! This month's theme will be letter M of the new Monster Manual! Everything from Mages to Myconids in the MM 2025 collection is good to go! Rules are as follows: One submission per patron from any paid tier Post your submission belo

Hello again friends! Today I have for you the Roc from the new Monster Manual! This was an excellent sculpting and rigging project! All those feathers were a real pain but I know it pays off in the long run. I went for a standard flying pose as that's the easiest pose to be printed, but as its rigge

Hello friends! Whew! This was a lot of work but I proudly present to you the Haunting Revenant! This giant spooky haunted house was a lot of fun to work on today and I'm really happy with how it turned out! To print this the best way to do this is in the pieces that I supplied. I made sure that the

Hello friends. Today I worked on some very strange requests haha. I made: Skidpadder Turtle - this massive turtle acts as a beast of burden for Underdark denizens. This is a very large mini so only the largest of resin printers can handle the presupported file. For FDM folks this is a pretty easy pr

Hello friends! I'm happy to report the new Elf Female Wizard 2 printed very well. I'm not the greatest painter but I think I did ok here. This was the request for the patron who won last month's contest. I hope they like my work :D Also today I worked on some Patreon requests and made: Zombie Fire G

Hello friends! Today I worked on the spooky Revenants from the new Monster Manual! Graveyard Revenants - this horrific mass of bodies are the vengeful spirits of victims of a mass casualty event who collectively want to destroy the cause of their deaths. This was a pretty wild model to put together.

Hello friends! Dragoncon was a lot of fun this weekend but now I'm home and back to it. I got some down time today to do some more modeling so I worked on the Remorhaz from the new Monster Manual! I started work on this last week and was able to do some tweaking here and there. It was not easy to ma

Hello from Dragoncon! Its been a fun experience so far. Lots of neat panels and cosplay. That line was atrocious though. Glad I had water. I set up a chat in the Discord in case wanted to coordinate or something. But anyway, I did get a little modeling time this morning so I was able to make: Human