MysteryMakers

WE ARE MAKERS TIER Okay guys, these horror helmet ideas are getting better and better, and I'm having way too much fun with this! So, here's the next one! I actually had this design planned the moment i made the first one. I only mentioned it in a few comments and didn't really announce it properly

Okay, you guys come up with the CRAZIEST ideas! Someone sent me the idea of mashing up horror characters with the Iron Man helmet, and then I came across this cool Iron Man Mike Myers mask concept by Freshkeria on TikTok. So, long story short… HERE IT IS! You can 3D print it now! The design is prett

OK, this one took a bit longer than I hoped, but now I’m pretty happy with it! :) The first thing you’ll notice is that this model will need quite a lot of supports. Sadly, that’s just the nature of the model. However, I’ve added one more “experimental” split to the STL folders, just as a suggestion

Ok guys, I have been working on this thing for the past 14 days, so i have to ask you now... Are you afraid... to build this thing ? :D It comes as 2 separate projects and has a total of 141 parts :D I could write a whole chapter about this release, but that would be far too annoying to read, so I’l

Starting with some simple/quick releases this month :) As many of you know, Paz Vizsla is my baby. He’s what got me started seriously with making all of this, and it’s been a while since I worked on anything Paz-related. So this time, we have two new releases: 1 — Pneum 150 The Pneum 150 is a metall

Fun fact: when the first Harry Potter movie came out, I was around the same age as Harry. As the characters grew up throughout the series, so did I, so it's no surprise that I fell in love with the characters, the story, and the whole world. Now, I know there are mixed feelings about the remake, but

When I released the Bane mask earlier this month, I mentioned that I had one more idea for it—and here it is. A full sized bust display piece designed to hold your 1:1 scale wearable helmet. But while I was working on it, I couldn't help myself and ended up making a mini display version as well for

I don’t normally make mini display pieces, but you did ask me to upload a combined sword and shield for this one… and I just can’t leave things half-finished! :D So, I figured I might as well turn it into a little display piece! It’s about 10 cm in diameter and features a small landscape scene, with

Since we're on the topic of green, I have something new for you: the Green Arrow Absolute Skull Mask. This project actually started as a simple half mask. The official description I found only mentioned a half-mask design, but after going through various official images and concept art, I couldn't q

Alright guys, one final update on the Lantern! I've gone through all of your feedback and requests, and I've done my best to incorporate everything—and then some. Next to the light up rings and all, the build is absolutely packed with improvements and options. Keep in mind these updates were done on

Okay, it's finally done! Thank you for your patience, guys. 💚Available to all "we are makers" tier members !!!! The Green Lantern Rings Collection Upgrade is complete, and it is absolutely packed with content. Let me jump right in and recap everything that's included: 1. Original Green Lantern Ring

No worries guys, the Lantern Rings are also on the way. I just wanted to get this one cleared out first :) The new remastered Kokiri Sword and Deku Shield from the upcoming Zelda: Ocarina of Time remaster. Both the sword and shield are full-size props, so keep in mind we're talking about some huge b

Green Lantern rings are about to get a nice upgrade. The pulsating/glowing ring is still one of my favorite designs to this day, so I've decided to revisit the concept and improve it even further. The goal is to make it easier to use while also making it compatible with all of my Green Lantern ring

Okay, this was a rather fast one for me, but fun nonetheless. It's the Elegant Eye Cyclops visor from Marvel Rivals, and while I was at it, I made his cloak pins as well. I thought it would be fun to make more Cyclops visor variants, so why not? So tell me guys, should I do more of these visor versi

So I was watching Knightfall Part 1, and immediately had the urge to stop everything and make a Bane mask. I took some inspiration from Knightfall, but added my own touches to make it more semi-realistic. And while I was at it, I thought a mask this badass definitely needed a proper display stand. N

First model of the month is here! 😊 Since I've already made so much from Doomsday, it makes no sense to stop now. So here is the alternate mask we've gotten to see, and the more details that are revealed, the more excited I get about the movie. Available to both Youngling and We Are Makers tier mem

Ok, this was also planned for a while… so here it is! The Xena: Warrior Princess Weapons Pack Included in the pack: Sword Light/Dark Chakram Balanced / Yin-Yang Chakram And each of these comes with quite a few options, so let me go through some of the features. Sword Printable structural-strength co

So my Star Wars fans don’t think I forgot about you guys !! This is something I’ve wanted to make for a very long time. I’ve always loved the look of it, and while I know there are already a few interpretations out there, I wanted to stay as true to the game as possible—while still adding a few feat

Doomsday, the gift that keeps on giving! I trust you’re not too annoyed by these yet, because here comes another one — the Doomsday Boris mask! Now, working with the very, very, VERY limited references we have, I did some photo brightening/enhancing and tried to piece together what I could. From wha

ok, this was a quick one :) It was suggested, and since I like the movie I thought… well, why not? Plus, the designs in that movie were pretty damn cool. So here it is: the blaster rifle Tom Cruise uses (well… one of the Tom Cruises ). To make it a bit easier to print, It is split by filament color.

Yet another piece from Doomsday is done! :) This time it’s the Latverian Witch mask, together with the neck armor pieces and the cloak clasps. The neck armor is a little tricky, so I’m not entirely sure how suitable it is for a hard plastic print. It might work better if printed or produced in a mor

Aaaand this one is done as well! To keep things short, I included: Transparent visor Mesh (see-through) visor Experimental version for an LED insert, so you can make the visor screen glow while still being able to wear the helmet Desk/display stand HelmetScaler 3mf version — www.helmetscaler.com Exp

Alright, Part 2 is here! I decided to combine everything into one full release, so you can now start printing the complete Dr. Doom armor. Part 2 brought some really interesting pieces, especially the torso armor. For that one, I came up with a method that allows you to insert rope between the armor

So, at the moment I'm playing Arkham City on the Nintendo Switch 2, and I suddenly got the urge to make the Riddler's cane. So I literally paused the game and went off to make the cane from Arkham City. Once the cane was finished, I thought it'd be pretty cool to make the hat as well... so I did. Bu

Ok guys, I've started work on Dr. Doom's armor from Doomsday, and judging by the costume references, there aren't that many hard parts. Buuuut, I still didn't want to keep you waiting, so I'm releasing the things I've already made in this Part 1. :) Shoulder plates (2x) Left and right pins, both det

Sorry it took a bit longer guys, had some minor bugs with the page, but as you requested the strap cutout version as well the "mouth piece separated" version have been added :) If you didnt try out the new page for model downloads, you can do that here www.mysterymakers.club Just open up the page -

The new MysteryMakers website is officially LIVE and ready for you to use! https://www.mysterymakers.club I've put together a quick video to guide you through the new page, but don't be afraid to click around and explore everything for yourselves. A few important things to know: you dont loose anyth

It happened—we finally got our first look at the new Dr. Doom mask, so of course I had to make one :) It's a simple print, with both 3MF and STL files included, as always. The model is based on the SDCC costume reveal. Since the mask was shown with the hood on, we couldn't see the top or the back of

Okay, I've been wanting to make this one for a while, but there just weren't any good reference photos available. The moment I saw some shots from SDCC, I had to jump on it! You'll notice the ring parts are a bit on the small side, so they're better suited for resin printing. That said, I've also in

Hello everyone! A quick message to all of my beta testers for the web page: if you haven't already, please check your email when you get a chance. I'd really appreciate it if you could complete the testing, explore the website, and send back any feedback or bug reports. Your input is the final piece

Every time I release a model, no matter how I split it, there’s usually someone who wants to have it split in a different way :) And honestly, that’s totally fine — we all have our own preferences, workflows, and ways of doing things. Buuuuut the problem was always: if you move the cuts, that means

Another display piece is joining the collection! This time it's Batman's Spear Gun, as used by Michael Keaton. I know there are already versions out there, but I don't think any offer the same features as this one, sooo let me show you what i made here and what's included: • Modular quick-swap syste

I can’t believe we’re getting so close to the finish line :) I don’t want to spoil too much in this post — just watch the video, let me know what you think, and I’d love to hear from you if you’re interested in helping with the testing :) Also, thank you for being patient with the slower releases th

Yup, that’s right — this one is made free for everyone, and the download can be found here: https://makerworld.com/en/models/3031221-mini-dragonball-radar-with-screen#profileId-3406953 So why did I make this one free? Well, it uses a piece of electronics that I’m growing really fond of. But, similar

Okay, this one might come as a bit of a surprise, but I've been planning to make this one for ages! In case you were wondering... yes, this is a full 1:1 scale display cowl based on the 1989 Tim Burton Batman. And yes... this thing is HUUUUUGE ! I've also added a little experimental feature. I creat

And you thought I was done with Predator stuff? Well... not even close. This time I've tackled something I haven't seen anyone make yet—the HUUUUUUGE rifle from Predator: Badlands. And when I say huge... I mean HUGE. (Reference photo attached so you can see just how ridiculous the size of this thing

Okay, this one took some heavy lifting, but it's finally done! The Galactic Racer Helmet from the upcoming game is now finished! It was pretty tricky figuring out the shape and proportions since we don't have many reference images to work with yet, but I'm really happy with how it turned out. As alw

Alright guys, I originally wanted to surprise you with this one, but i can allready tell its going to be a bit longer than expected. Since we finally have a release date for the game, I figured I'd let you know that I've started working on the Galactic Racer Helmet so you can have it printed while w

Ok, ok... this is one I've wanted to make ever since we first saw it, but there simply weren't enough references for me to get started. Now, full disclosure: there still aren't 😅 I'm still missing a few angles, so if this one isn't quite at the same insane level of screen accuracy as some of my oth

Ok, this is another fast one, but I just wanted to get it off my plate. 🙂 For those of you who don't know, this is the other version of Leon's hatchet from RE Requiem. Just like the first one, I made the entire thing fully 3D printable by introducing printable bolts along with a small bolt key. Tha

OK, I know you’ve been waiting on this one for a veeeeeeeeeeeeeeeeeeery long time... but finally, it’s here — and honestly, it turned out even better than originally intended! 😁 The files have been revised and adjusted, and are now fully compatible with everything you see the blaster doing in the v

Our friends over at JJ Industries have decided to produce another batch of their Amban Phase rounds in real metal! That means if you decide to grab one from their store, your MysteryMakers Amban Phase Pulse Rifle is fully compatible and ready to hold one of these rounds. A real metal round combined

Who’s playing the new Resident Evil? I know there are already quite a few files out there, BUUUUUT I always try to make my models a little different. For this one, I made the entire thing fully 3D printable by introducing printable bolts along with a small bolt "key." That means you can print every

OK, the moment you've all been waiting for is finally here — the Amban Phase-Pulse Rifle is ready for download! 🎉 I'll just mention a few features and let the photos do the talking. 😁 Features: Moving trigger action Detachable scope Open/close magazine mechanism Textured and clean stock options (�

Yup, the mechanism is now perfected (after many, many prints!!). It all works as intended — easy to build and easy to use. :) I am now making all the renderings and nice images so you can see everything that's included and follow along, which means it should be ready for release soon. :) Thank you f

Okay, I'm sure you were expecting the Amban Rifle first, right? 😄 But here's a little something in between... 007 First Light – the awesome new main villain mask! I designed this one with a nice printable carbon-fiber texture, but I noticed there were mixed feelings about having the earpieces/headp

A quick update on the Amban Phase-Pulse Rifle project! First of all, thank you all for your patience. The model is very close to being finished, but this project ended up being a bit more complex than expected because I wanted to include as many functional features as possible. The rifle has a worki

First of all, thank you guys for using HelmetScaler, and of course for noticing stuff that I tend to miss😄 Helmetscaler.com There was a little error with the sizing strips scale export, but it is now fixed :) So make sure to jut redownload the latest version for your system ! To explain in detail :

Ok guys, Mando Month is not over 😄 And I’ve been working on something that I was really hoping would be done by now (second photo/animation)… buuuut in the meantime, a lot of you kept sending me photos of the “droid blaster” from the new movie — and honestly, I just can’t say no to these things. No