Titanic: Honor & Glory

EARLY ALPHA ACCESS COMING SOON! Hi all! It's been a while since our last big update, so to start with the biggest news: It's getting close to Alpha time, starting with early, exclusive access for Patrons! The launch of the THG Alpha will be in stages. First, there will be a private, simple test buil

Hi all! Kyle here to wish you all a Happy Halloween if you're into that sort of thing. I hope you're all having tons of fun, lots of candy, and donning amazing costumes! We have a few things to share (around 80 images in the above slideshow, so better get scrolling!), but first I'd like to give a fe

...or foggy or clear, or any other time. You choose!

Some additional imagery from what we're working on, early for our Patrons! The time to explore is approaching. Please stay tuned.

Hi folks, Kyle here for some more much-needed updates! Beams upon beams upon beams... Springing forward from the last structural update a bit, work has been ongoing with beams, starting with B Deck and moving down and fore-aft. The color-coded blockout shown before was simply a guide, THESE are the

It's been a while since our last big update for THG and Project 401, so here's a look at the latest! THG & P401 Recap - 2024 Q3 & 4 (YouTube)

Not much to see so far, just starting to work through the plating for more watertight bulkheads.

Welcome to “A MONTH TO REMEMBER.” 31 days of Titanic animations, announcements, documentaries, lectures and livestreams brought to you by TITANIC: HONOR AND GLORY and our partners. To kick off the month, we begin where Titanic once began... Titanic was comprised of many thousands of steel structural

Quick Kyle update this time: I've made more progress on the aft structure, mainly for the boss frames and the web frames located between the two wing propeller brackets/castings. Due to the propeller shafts and the need for extra strength, the steelwork is far more substantial here than in other par

Not much to say at the moment since I still have a lot to do in this area, but I'm making progress in the more complicated structural elements for the shaft tunnel. There are a lot of web frames and bracing to take into account. I've also made good progress on the boss frames, which are special shor

The first Kyle Update of 2024! Happy New Year to all, I hope this year has been good to you so far! Now that I have basic frames in place, I've been working on some stuff in the aft part of the ship. Specifically, the shaft tunnels. The shaft tunnels were compartments at the stern of the ship, locat

I know, no updates from me for months, now suddenly a bunch. I should be taking a couple days to enjoy the holidays, yet here I am, a couple hours before the ball drops, getting a start on one of the watertight bulkheads. This bulkhead is WTB O at Frame 111 Aft, one of the furthest aft bulkheads. I

Kyle here: Since my last update I've finished the initial run of hull frames, pretty much outline all the hull curvature and providing the main guidance I need to work on a bunch of other areas. These last frames fill in the fore and aft ends of the hull and include the frames in the counter stern.

Season's Greetings! First off, Merry Christmas to those who celebrate and happy New Year! Included here are 25 screenshots taken in the Belfast scene I made earlier this year, which itself stems from the Belfast scene we made for Demo 3 back in 2017. The gantry allows for lots of fun views of the sh

Hi all, I figured it was about time to provide an update on my end of things as it's been a good while. Sadly I have not gotten any further structural work done the last few months, so there's nothing new to show there. I will instead try to recap what has happened since my last update, important bi

Hi all, Kyle here! I'm a bit late with this update since I intended to do it on March 31st, but better late than never. March was a VERY slow month for me, so this will be a more general THG update. Work on the structural model has been mainly with hull frames, and it's is a hugely tedious process.

Kyle here - Happy to tell you all that I've begun the process of making the ship's frames. These are steel channel "beams" that form the ribs of the ship. They're what the hull plating and deck beams are riveted to. In some places they are partly replaced by larger and more robust web frames for ext

Not much to say here, just doing more Tank Top plating, so here are a few more images. Things get really weird towards the bow and stern, especially the stern in way of the dynamo rooms, fresh water tanks, and shaft tunnels.

Hi folks, Kyle here again! Over the last month or so I've made some faster progress than usual, though there's still a long, long path ahead. Here's a quick rundown of what's been done: SHELL PLATING I mostly finished adjusting the bottom shell plating of the hull. This involved adjusting the meshes

Hi folks, Kyle here! I think it goes without saying it's been a while. My last update was just before (American) Thanksgiving, when I started taking time for the holidays. The remainder of November and good portions of December (Christmas and New Years) were like this as well. I was meaning to get a

Hi all, Kyle here: ~FLOORS~ Placement of the wing tank floors is done! It was a tedious process, but they're all in place with their lightening and limber holes figured out. This means all the floors are now in place, so only the wing brackets are left to do. However, I can skip the brackets for now

Modeling continues for the wing tank floors or brackets. Pretty much every one is unique in some way, so each one has to be adjusted as I place them. Easy, but tedious. The good news is it'll probably be a bit sooner that I'll start working on vertical hull frames, as the brackets beyond the ends of

It's been a rather slow month, including another week or so where I couldn't get much done. But most of all this part of the ship has definitely proven to be the most difficult. The lackluster documentation, interplay of parts, and the sheer amount of curvature in this part of the ship lead to some

Not a huge update, nothing too special of note at the moment, just posting some new beauty shots as I continue to flesh out the double bottom with more floors. Those under the Turbine Room are done and a few more forward. The last image of the people lounging around shows the cutouts in some of the

Kyle here, just a quick update on structural model progress. I more or less finished blocking out the lightening holes and some other aspects of the double bottom, so it was time to start working on the actual models for the tank floors. For those still out of the loop, the "floors" are the vertical