mz4250

Hello friends! Today I proudly present the Pit Fiend from the new Monster Manual! This was a great mix of sculpting, rigging and modeling work. I really like his over the top horns and the flame mace was cool to make. For FDM printing this fella is big but complex, so I included a version with no st

I hope the universal response from everyone seeing this today is "Thanks I hate it!" lol Today I had a great time working on the Lemures! These are the lowest ranking devils who shamble from the primordial ooze of the River Styx from lost souls the fall into the ranks of the infernal legions. I made

Hello friends! Today I had a lot of fun working on the creepy Larvae from the new Monster Manual. I skipped the Lamia given the ones from 2014 still hold up and the new artwork doesn't really show any major differences. So instead I had a lovely time sculpting up these creepy fiends. Larvae are what

Hello friends! Today from the new Monster Manual comes the little devilish minion the Imp! I made two versions with one that is flying and I also updated the original from 2014 that's on the ground. The version on the ground is very easy to print in FDM and I actually printed one with no supports ju

Hello friends! Today I worked on the Ice Devil from the new Monster Manual! This was a nice mix of modeling, sculpting and rigging work. Given how beefy this fella is and how thick his Ice Lance is printing him as one piece in FDM is actually pretty reasonable. I would print him on his back with the

Hello friends! Today I worked on the next creature from the new Monster Manual the Horned Devil! This was an excellent sculpting and modeling project. I'm really happy with how he turned out. For FDM printing I made sure this model comes in pieces for easier printing. You print the body in his back

Hello friends! Today from the new Monster Manual I have for you all: Erinyes - this winged devil was an excellent modeling and sculpting project. It gave me another opportunity to work on a armored female model that I'm sure will be useful in the future. I really enjoyed working on the fire wings to

Hello friends! Today I proudly present the Chain Devil! This was a wild project to work on that involved a lot of modeling and sculpting. I'm really happy with how the chain skin came out as well as his chain whips. I made two versions with one not having arm chains and one with. The one without the

Hello friend! Today I'm really happy with my work as I made Female and Male Cambions from this amazing book! I very much enjoyed working on these. For the female I went with a pose that shows she's offering wine if you go with her deal, or something far more dangerous with her flames if you don't. T

Hello friends! Today I worked on the Bone Devil from the new MM! This was an excellent modeling and sculpting project. I really enjoyed working on the little details of this guy. I made two versions. One is "flying" and is a more resin focused model. You can in theory print it in FDM if you print it

Hello friends! Today I'm back at the Monster Manual 2025 and made: Basilisk - this was a fun mix of sculpting and modeling work. I was able to use the base mesh from the old one as a nice launching point, though this creature has some bodily differences like the longer neck and tail plus more rocky

Hello friends! Today I worked on the Monster Manual 2025 and made: Barbed Devil - this was a fun sculpting and rigging project! I made two versions of this guy. One is holding a fire spell but is very hard for an FDM printer to pull off so this is a resin only project. I did however make a more FDM

Hello friends! Today I worked on requests and was able to make: Loviatar, the wife of Bane! This goddess model was fun to make. I don't make sultry models very often so this was different for sure lol. My wife gave me some advice on how corsets work so her feedback was key to the success of this mod

February was a productive month! But its time to wrap it up and I'm very proud of the last model, the archdevil and lord of Cania... Mephistopheles! He's the greatest wizard in all the Nine Hells, the Cold Lord and Lord of Hellfire. Yeah that's a walking contradiction but I'm sure he doesn't care lo

Hello friends! Today I worked on more Tome of Beasts models and made the Salt Devil! This fiend is a horrific slaver who wields a scimitar and drains water from its victims. For FDM users I recommend printing him on his back. You might lose some spikes when you remove supports but it'll look fine. B

Hello friends! Today I worked on the next fiend from this book the Gilded Devil. This coin covered baddie was a lot of fun to model and sculpt up! All the coins were a real pain but at least the end result came out good. The chains on his flail had to be made very thick for them to print right both

Hello again friends! Today I continued working on Tome of Beasts and made this weird crystal devil. Given this baddie can attack in groups I figured I'd make a couple of poses in case you want to throw a bunch of these at your players haha. If you want to make more poses I also included a rigged ver

Hello friends! Today I continued being spooky and working on Tome of Beasts! I made: Lunar Devil - this is a really creepy devil who loves to torment druids and wreck havoc in nature. This was a lot of fun to model and sculpt up. Its fully rigged if you guys want to make variants too :) Ink Devil -

Hello friends! Today I got back into Tome of Beasts and chose this creepy devil the Automata! Its a chain devil that got some sweet mechanical upgrades and now prowls the Nine Hells for deserters, escaped prisoners or adventurers that really should know better lol. For FDM printing I recommend print

Thanks to everyone who submitted pieces for this months contest! Now its time to vote! You can see submissions here. You're welcome to vote for more than one as they're are so many great submissions. I won't vote unless a tie breaker is needed. Prizes are: 1st - a custom mini 3D modeled, printed and

Hello friends! Its time for another 3D Printing & Painting contest! This month's theme are the Fiends! If you got any Devils, Demons, or other denizens of the Nine Hells / Abyss now is their time to shine! I'll also accept Fiend Adjacent, like cultists, PCs that are fiendish, or even a consort / con

Yesterday it was requests. Today its back to this awesome book! The Narzugon was another fun model to sculpt up. Also it was nice to add on my updated Nightmare to this guy. Prior to this update I printed this model back a few years ago as one piece, however if its easier for you guys to print him i

Hello friends! Today I worked on the Hellfire Engine! This was originally made back in Mordenkainen's Tome of Foes but it was in need of a tune up. I added a lot more details to this fella and I'm really happy with the beaten metal look I gave some of its parts. I originally printed this guy in FDM

Hello friends! Today Mia over at M3DM has a free Potion Table terrain piece ready for you all! Tomorrow is my turn for this spooky collaboration so expect something truly frightening :P Also today I have two more models from Monsters of the Multiverse! I have the little Gazer mini and Geryon the arc

Hello friends. Today I was able to complete a few more requests from the Request Board :) Bel on his throne - This was a fun model to work on! I had to revisit my Bel from last year to rig it up then sculpt some more. Full files are in Baldurs Gate - Descent into Avernus - Bel and also below. Dwarf

Hello friends! Today I made some fun requests happen for the folks that won last month's painting contest! I made: Rat Devil - You know, if you have any rodents near your home they're gonna eventually summon a fiend if you're not careful :P. Full files are located in Misc Patron Requests - D - Devil

Hello friends! Today I proudly present to you a different take on the Succubus. Everyone has seen every kind of sexy succubus online, but Jen suggested a sexy librarian and I loved the idea. Who doesn't love a hot librarian, so why not? Well, she suggested the librarian be carrying a stack of LOTR e

Hello friends! Wow! 5400! This is amazing! Thank you all so much for your generosity in supporting my effort to make free 3D printable minis for the tabletop community to enjoy! You're all wonderful people! Monster Manual Revisited: The Incubus! This week I'm visiting family in preparation for my fa

Here are two more fiendish requests I completed today! Thraxxia of Graz'zt - Daughter of Graz'zt, the demon lord of temptation. She's supposed to be a "super succubus" so naturally I used my old succubus but obviously did some heavy editing. She gave me some ideas on what to do when I update my actu

Hello friends! Its time for another 3D printing and mini painting contest! This time the theme are Fiends! Got a demon you're rather proud of? A devil bbeg that terrorized your table? Maybe a yugoloth npc that helped then betrayed the team? Time to post them here! Rules are: Post your piece below in

Hello again friends. Today was a mix of modeling, printing and painting! First up with have the Linnorm, an pathfinder Dragon! This fella has been split up into pieces for easier printing and there are presupported files as well in the Pathfinder folder. The full stl is here for everyone else. I als

Here are some more requests completed by folks that won last month's printing and painting contest, along with some thank you gifts for the higher tier patrons. I'll be printing and painting some of these later this week :) Gaugath - This devil lord can print well as is, but I recommend tilting him

Hello friends. First day of my Army Reserve Annual Training is going fine. Masks and social distancing were enforced, and so far its been fine. I sadly couldn't model much during my down time, but I can a least make this post. So its time for the next 3D Printing & Painting contest! This month's the

Today I updated two more devils from the Monster Manual! First we have the Ice Devil. I uploaded the model so that an FDM user can print him as easy as possible with supports, though there are versions with no base and weapon too. The resin folks have a presupported file choices as well. I also upda

Here is my next devil updated and ready for 3D Printing! For resin I've uploaded the presupported file, but I'd tilt him upside down and use thin supports if you want to make your own. For FDM he prints well on his back and I've oriented the file that way. I've also uplaoded a version without the fo

Today's project was making three versions of the Erinyes to help spice up your next Infernal encounter! I made a charging into melee pose, a ranged pose, and a threatening but stoic pose. The ranged version is probably the most difficult to print, so I made one without the bow and arrow so you can p

Here is the Bone Devil touched up from its original pose, but I also made versions with it's polearms, as well as flying versions! I did my best to help with orientation to make life easier for FDM folks to print, but regardless, the Bone Devil is a very difficult model to pull off. The original ver

Hello friends! Here is Lucille the Pit Fiend, the right hand of Zariel, in her true form! Yesterday I made Lucille if she went to the gym a lot.. like... a lot. But here is the version you actually see in the book :) She is best printed on her back like the one yesterday. However if your support gam

Hello friends. Every Tues and Thursday at 0830 EST I Live stream my 3D modeling on Twitch , and today I had some fun working on some unique models! First I made a Loxodon Artificer per a request on the Request Board. You can find the full files in the Adventurers - Artificer folder and here: https:/

Here is the Archduke Bel, the former ruler of Avernus and constant thorn to the side of Zariel. He should print fine as for FDM with supports. You might lose a few of his claws under his wings unless you're support game is strong. Nothing green stuff can't fix. For resin I'd tilt him back about 15 d

Next up on my effort to update all my old models from the Monster Manual is this handsome fella :). Give the claws in his wings pointed downward I recommend printing him on his back with supports for FDM. For resin he should be fine tilted back about 25 degrees with thin supports. Full files are in

First model of the month and it starts with a bang! Here is the Chain Devil Princeps Kovik from Descent into Avernus now ready for printing! I made two versions, one for FDM and one for resin. The FDM one has thicker chains that will show up. I tried making his cloak of chains but I found there was

My next effort in this book following the Infernal War Machines are the Warlords of the Avernian Wastlands! First up is Bitter Breath the outcast devil who leads his horde of misfits, outcasts, and hobgoblins! He should print fine as is so long as you use supports. I recommend tilting him back about

Here is Thavius Kreeg, the friendly totally innocent priest of Torm from Descent into Avernus now ready for printing! I made a different version with a devil looking shadow as the base of the mini rather than the traditional circular base as well. Not that that means anything of course. Full files a

Here is the fallen Angel Zariel from this amazing book! I've uploaded versions of her with and without weapons to give you options on how to print her. Regardless she will print best on her back with supports and a raft. You can find the full files in the Baldurs Gate: Descent Into Avernus folder. Y

Thank you to everyone who submitted your amazing pieces to this month's contest! You can see them all here: https://imgur.com/gallery/4MMeQHm But now its time for you all to decide who printed and painted the best mini! Only one vote per patron. Winners will receive: 1st - A custom 3D modeled, print

Its that time again! Time to show off your best printed and painted 3D printed minis! As before, post your best work in the comments below with some sort of image sharing site (imgur for example). Use my files only and one miniature per patron. Remixes are welcome. As long as it falls under the cate

Today I modeled two requests along with updating my Spined Devil! You can find the Half Orc Chef in the Adventurers - Other PCs and NPCs. You can find the Lizardfolk Fighter in the Adventurers- Fighters - Other Fighters. The Spined Devil is in the D - Devil folder. You can find the stl files here to