Exclusive: MMMini Quokka!!

*** THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Members can purchase it once re-released, according to this Schedule.

Hi Everyone!

Introducing the new Subscriber Exclusive MMMini Quokka!!

This mini is 100% print-in-place, and requires no supports.  Its a quick and easy print that scales down very well.  I've included both regular and keychain versions (with hands and tail keychain hole options).

Check out a little preview video HERE.

There are also a pre-painted 3MF for those who want to print it in multicolor!

I hope you like it!
Matt

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)

(1) Ziro Wood Grain, Amolen Rainbow Rock, iSanmate Sakura Pink, Ziro Matte White
(2) Ziro Beach, Snapmaker Ash Grey, iSanmate Sakura Pink, Ziro Matte White
(3) Polymaker Wood Brown, iSanmate Chocolate, iSanmate Sakura Pink, Ziro Matte White
(4) Ziro Castle Brick

3D Print information:

• MMMini Quokka:  Includes regular and keychain versions (hands keychain hole or Tail keychain hole). Print-in-Place.

• Multicolor 3MF files! (Works with PrusaSlicer, Bambu Studio, and Orca based slicers)
  - Generally, when using Orca-based slicers for non-bambu printers, you will want to use File > Import rather than “Open Project”.  Then just set the filament slot colors and enter the recommended print settings listed here.

• No supports needed. 

• 10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)

• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

• This should generally scale down to about 50% with full articulation, on a well calibrated printer.  Your mileage may vary.
  
  *To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
  
  ***Paid Links.  As an Amazon Associate I earn from qualifying purchases.