Realistic Skeletor with moveable jaw ,and some options :)
OCTOBER LINK IS SENT TO THE "WE ARE MAEKERS" MEMBERS :)
Hope you're not tired of the "halloween" stuff, but i just want to give you a head start as much as i can :D
This one was something i had in mind for quite a while and it's now a perfect time for it
A highly detailed and realistic Skeletor helmet, however as you most likely guess, i couldn't just make that one without any "add-on's"
So included are:
1: Realistic skeletor helmet (option 1)
- mask and half helmet version
- pre sliced half helmet version
- helmet version with and without straps
- light bone texture
- heavy bone texture
- moving jaw
2: Realistic skull/reaper helmet (option 2)
- mask and half helmet version
- pre sliced half helmet version
- helmet version with and without straps
- light bone texture
- heavy bone texture
- moving jaw
3 . cartoon Skeletor version from 1980's He-man
- moving jaw
- mask and half helmet version
- half helmet pre sliced option
For all to work, i would advise to add a piece of dark cloth behind the mask , it will look much more awesome, and use some elastic straps, or rubber bands for the jaw to be able to retract back up
You'll notice I've added only 1 3mf file bcs there are about 30 stl file options in there to choose from, so I added only the first one to "kickstart" your prints , and if you want to use other options, just load them from the STL folder :)
If you don't mind me saying this is gonna be pretty scary halloween mask that can be used not only as a Skeletor but grim reaper, or any other skull creature :D
Comments (49)
How to buy this great job
for patreon members at the we are makers its free , for non patroen members you can buy it here :) https://cults3d.com/en/3d-model/various/skeletor-mask-with-moveable-jaw
Hey, Just want to say I love this mask. we must have the exact same size head because this thing fits like a second skin. I'm thinking of Electroplating one and having a brass or nickel skull. is the link still available? I'm kicking myself for not downloading the Skeletor files
It was released in december last year - if you were a member the link is active, if you were not drop me a message so we figure it out :)
Hi, is the pivot pin supposed to be glued in or something? It is quite a bit smaller than the holes where it sits in 😅
Are you sure you are not using the 5x5 pin instead of the pivot one ? :) here is the assembly :) https://www.instagram.com/reel/DBKIOdLKJen/?igsh=MXJ4eHdmdm93am9hbw==
hi guys! where i can find the download button?i'm new here...
Go to members tab and you see the links to Google drive to download
How can I get this project with a new YOUNGLING tier account?
Thos project is not available to youngling tier members as per tier description - -youngling tier is a test tier, a cheap way to try out patreon, so that one only gets you first model of thr month and a welcome model - if you wish to get access to this one , all last months peojects and this months projects please consider upgrading to "we are makers" tier :)
What is the black fabric you wear underneath the mask? It looks cool!
not sure to be honest, i just both a piece of cloth locally , its quite thin , so looked like it cold work well :D
Ok folks, I printed using the .3mf on the X1C. Printed in Sunlu pla+. Printed flawlessly. I'm honestly a little mad that whatever support settings you used worked SO well, they came off easier than anything I've ever done, so I'll be looking to learn from that. Only problem I have, is my head doesn't fit lol. I'm going to need to figure out how to extend the top back of the head piece by a few mm. Without putting a black cloth behind the mask the teeth bite the sides of my face, I think that will be solved with the black hood over my face. (Teeth hurt if you close it down too fast lol)
Thank you will do.
What’s the best orientation for the full skull head. Is it the same as the others.
hard to explain without sharing a photo, but feel free to post this question in the FB group and we’ll reply with some photos :)
Hi, I have tried to print the "kickstart heavy texture helmet option.3mf" on my Bambu X1C 3 times now. I am using "Polymaker Matte PLA Filament Cotton White". Each print has failed early in the print with the skull1 detaching from the supports. Is there setting to strengthen the supports connection to the skull?
can you send me a message with some more info and photos ? its hard to say what went wrong, but its 100% certain the files are ok, as i’ve printed a few allready, and from the FB groups and IG posts, quite allot of people printed them also without any issues, so drop me a message, lets see what went wrong :)
New here, first patreon purchase ever! I think I'm going to try this is a glow pla.... Should be sweet! I'm going to have to download the show to watch with the kids, let them know the real cartoons! *edit* - Also, check the 3mf file you put, the plates werent named so it took me a while to figure out why there were to faces, I figured out the small difference, one is the skeletor (bigger bump just above the nose) and one is the reaper. If anyone else is looking for the easy mode print that should help them figure out whats going on. Thanks again dude!
The plates are not named bcs i provide the jpg photos where every option and file is broken down and every file is named, so the same file names that you see in the photos can be located in the 3mf - the 3mf is quickstart print - more options and versions are always in the stl folders :)
Hello, I tried printing the STL for the skull and the print job keeps failing, I am using Bambu A1. Not sure if anyone else is having this issue. I am a NOOB to 3d printing, so it very well could be an issue on my end
100% no issues with the files as quite many people printed it allready as seen in the FB group and IG posts, and i myself printed 2 of them allready also, both orinted on the first try, no issues. Buf if you can explain how and where it fails, or provide some photos i could help out more, but you can rule out the files being an issue :) https://www.instagram.com/reel/DBKIOdLKJen/?igsh=MXJ4eHdmdm93am9hbw==
This would make a wicked cool Ghost Rider mask too!
do you have guide to put the elastic straps inside?
Just loop the elastics through the holders, its pretty straightforward, csnt go wrong either way :) but inwill post an assembly video soon on my IG just in case :)
What orientation did you all print this in?
Check the 3mf in the folder, it has orientation and support info included
What size are the magnets for the helmet version?
what would you use the magnets for ?
Hi, printed this out yesterday and the jaw isn't wide enough to click into the skull piece. Anyone else suffered with this issue ?
I printed 3 allready, nonproblem with any, so that shouldnt be possible :D drop me a message with some photos, lets take a look :)
make one with a back and we can use it for Red Skull :)
i see the 3mf folder, but there isn't a file in it. can anyone else see it?
yup my bad, just refresh, its in there now :)
This is going to be a problem for everyone around me haha
ahaha cant wait for it to print :D i think its gonna be awesome :D
This is great for the month let go back to GreySkull
MYAAAAAAAAAAAAA! Can i request that the eye hole shape be added? So i can cut out shapes from them? I have spare mando lenses and black tinted sheets.
Great detail and thought on this model! I have an extra challenge for you, develop an insert for masks which will allow people with glasses to wear masks. The insert would act as a spacer around the glasses and fit against the mask somehow
The "somehow" part is the probelm :) diferent glasses sizes, and shapes wich will require thr mask to be further from thr face as it could not be rounded to the shape of theface, and make it bulky. But could be a cool thing to tey and figure out altho contacts would solve all issues , but yeah an interesting idea :)
Sweet! Loved Skeletor as a kid, and now I work in Radiology lol
haha :D
This would be cool if we can integrate your moving eyes and sensor. Would be a cool desk model. Looks awesome. 🤩
Fantastic, Marko!! Never tired of cool Halloween stuff :)
gald to hear that :D
One of my favorite villains of all time
cant wait to see some prints :)
This is awesome!!!
thank you :)