All seeing pumpkin ready for download :)
THE ALL SEEING PUMPKIN !!!
Haha , ok this just might be the best halloween prop of 2024 :D
Attached you can see a video of what it looks like "in action" :)
I did mention there are some props in line that will use the functional eye design, so here is another one.
The cool thing is, it's interchangeable from the book, so you don't need to reprint the eye mechanism. You can just add it here , or remove and add to the book :)
There are total of 5 pumpkins to choose from
- 5 lids(top) - version for the motion sensor and version without the
motion sensor
- there is also a non functional version included with 3d printable eyes in case you don't want to mess with electronics, but the electronics version is pretty cool :D
- there is also a "presplit" top part for all 5 pumpkins so you can print the stem in different color
The pumpkins are pretty detailed , i printed mine at 0,2mm layer height but resin prints and 0,12 mm layers will be even more awesome
As always, everything you need to make it work is included :)
Comments (39)
How do i download this design?
hey Dan, you joined as a yougnling member - as per tier descirption, yougnling tier is a test tier, a cheap way to try out patreon - so you do not have access to this one - you can spend mysterymakers coins on this design ( its costs 2 coins) , yet as a yougling member you only get 1 coin per month - all of this is mentioned in the welcome message you get the moment you join :) if you will need more help with any of it, please let me know and i will send you a messag to your inbox to walk you thru everyhing if needed :) - keep in mind, as mentiond, all that info is in the welcome message you got when you joined :)
Would it be difficult to adjust the model so I can use it as a candy jar? It should be a little bit bigger and hollow on the inside.
Nope, you allreqdy have the "non functional" version included in the folder :)
I just can't get it all to work, got it loaded on the nano, and hooked it all up, and nothing happens, even tried the non motion sensor version, same thing....I have some work to do I guess..
If its all wired corectlly there should be no reason for it not to work, are the seevos working, did xou try a diferent board to make sure its not a faulty one ?
FYI: Do not get an ESP32 Nano. The servo library is not compatible. This library only supports boards with an AVR, SAM, SAMD, NRF52 or STM32F4 processor." And don't do like me - get everything soldered up and THEN decide to load the sketch....
when I load the program for sensor, the servos just keep moving, no pause. I made sure to put it somewhere no movement, and servos were not in line of sight of the motion sensor. any ideas?. I really want o use the motion sensor
drop me a message with some vieos/photos, hard to say iwthout knowing if everything else is wired properlly
Need a little help please, I'm trying to upload the code to an Arduino and I get the error message 'include' does not name a type'. ??
check the “how to install the code video . however it would apear you did not copy everything right, make sure there are no extra symbols other than the code
FYI The schematic is wrong on this. Eyelid is d6 and eye is d5
Does it need supports?
Nope , but you will get s better result if you alightly support the eye opening as the overhangs might get in the wqy if the eyelid. I didnt supprt mine but i slightlly trimmed the opening in post https://www.instagram.com/reel/DAoTTUjKntE/?igsh=NnJkYndjbXI5aDkx
This will be my first print of yours. I love moving prints. Can't wait to see what else there is
I absolutely love this and have already made one. But I was wondering if you could make a larger version? I would usually resize models myself but I don't know anything about 3D modelling so wouldn't be able to change the eye hole to keep it the correct size
it is not possible to scale it up when you have parts taht are uncahnged like the eye, and servo's, if you scale everything up the parts will no l onger fit
has anyone in US priced about what all the electronics/parts would total?
I'm in the UK, it came to about £30 the Arduino was the most expensive part
This and book are so very awesome. I hope this pumpkin is not the last use of the eye mech. Hoping for more uses.
Definately not, ill juat mix it uo between other projects but i have quite a few things planned :)
Just printed everything and got the electronics ready bt the diagram to put the eye mech together seems a big confusing. There are parts that arent shown where they go, like Box 1. B, eye 1.b
boy 1B goes onto box 1A,, i named them so its suggested that way - Box 1 ( A and B) , asame as for the eye - eye 1 (A and B) . there is also an assembly video in the folder that shows you how to put the eye toegether step by step , its in the "build guide and code" folder :)
Just awesome, Marko! [sigh] I knew ordering electronics to build only two all-seeing eye projects for Halloween was not enough. Second order coming up...
Happy to hear :)
Isn't the 22mm eye also good? Because in Italy there is a risk that it won't arrive by the end of the month
Unfortinatelly no, it will not dit the mechanism
never done anything with a arudino. i dont see a tutorial on how to load the code and stuff. also, how easy would it be to install the eye into a real pumpkin?
Ill post a video (moat likely tomorow) that explains it all :)
Would love to see your take on a wearable creepy pumpkin head
Hmm :)
No freaking way!!?!?!!
Haha :D
Awesome!
Thank you :)
This is creepy AF, I love it ahahah
Haha true :D appreciate it : d
Yeeeees! 😎
😁😁😁