mz4250

Hello friends! Today I 3D modeled a Pirate Ship Mimic! I made two versions. One for the Space Galleon Model, and one for the regular Galleon model. For both faces all you have to do is swap the existing ship bows on either models with this new model and boom: Mimic ship! The original model pieces ar

Hello everyone! Whew! This was a lot of work but the Wasp Ship is ready for 3D printing! This was a wild mix of modeling, sculpting and basic engineering work given it was very hard to figure out how the wings would work. I made an interior space for the ship that lines up with the map, and there is

Hello friends! Today I proudly present to you the next Spelljammer Ship, the Tyrant! This is a ship Beholders use in space and it was by far one of the strangest ships I've ever modeled. It flies side ways like the image above but the maps have it aligned with the tentacles at the top. I made a full

Hello friends! Today I proudly present to you all the next Spelljammer Ship! Along with a tiny version for ship to ship combat, I also made a full sized version that lines up with the maps of the book. But, for the first time ever, I made an internal space that has 5x5 in squares! I've never worked

Hello friends! Today I cut loose and worked on whatever inspired me, so I worked on the next Spelljammer ship... the Turtle! This was an excellent sculpting project and given this ship doesn't have a lot of surface area to use minis on, I'm actually making an interior space that lines up with the ac

Hello friends! I'm proud to report that my Galleon model printed well! This took a little over a month to print due to lots of wood pla being needed, my Prusa i3 MK3 dying, and eventually getting replaced. The largest pieces took days alone to print. Like my previous ships this model is an FDM only

Hello friends! It was a lot of work, but I'm happy to present to you all the next Spelljammer Sihp! The Star Moth is massive, and the tallest of the ships I've made so far. This was an excellent sculpting and modeling project. I made two versions, with one being tiny for ship to ship encounters, and

Hello friends! Today I cut loose and worked on whatever inspired me so I took on another Spelljammer ship! This time its the Star Moth. It was a fun ship to model, but, I wasn't able to finish it today. Ships take a lot of work and in this case the modeling is done but I need to sculpt up some detai

Hello friends! Today's model is the massive Squid Ship! This took a good amount of time to complete but I'm very satisfied with the results! I made two versions. One is very tiny and meant for ship to ship encounters. The other is massive and large enough for minis to walk around on as it lines up w

Hello friends! Today I cut loose and just worked on what inspired me so I wanted to make another Spelljammer ship! The Squid Ship so far has been a fun vessel to model up but I'll need more time to complete it as is the case with all ships. But I wanted to at least share where I am so far. By next w

Hello friends! I proudly present to you all the next Spelljammer ship, the Space Galleon! This was a lot of work but I'm very happy with how it turned out. Some fun details I added include a functional catapult and little rings so you can tie on your own rigging with knitting thread. I made sure to

Hello friends! Once a week I cut loose and just make whatever I feel like rather than requests or my main project. This week I started work on the next Spelljammer Ship the Space Galleon! This so far has been a fun project to work on given I have to reference real ship designs to pull this off. I'll

Hello friends! Today I cut loose and just make whatever I felt like! Today I felt like making another Spelljammer ship so here is the Shrike! This was a fun ship to model up! I like its simple but sleek design :D Like previous ships I made a smaller version for ship to ship encounters. Its been spli

Hello friends! I'm feeling much much better today and was able to get some modeling done! Today I worked on the next Spelljammer Ship, the Scorpion! This was a fun ship to model and sculpt up. It was fun as it was a mix of organic and construct modeling. Like the previous ships this is very very lar

Hello friends! Today I proudly present the next Spelljammer Ship! This thing is just as massive as the previous ones but I've also made a little one for ship to ship combat encounters. The full sized model is large enough to line up with the maps and have PCs walk around on. Given all the walking ar

It took three days to make this monstrosity but I'm proud to present a now 3D printable Nautiloid Spelljammer Ship! Modeling this alone took days and it took me all day to make this printable so I think I will now have a drink lol. This is the largest of the ships I've made so far so this is a FDM r

Hello friends! Today I continued working on this massive project! I was able to make the tentacles and finalize the smaller details on this ship like the weapon emplacements and sphincter doors. However now I have to make this actually 3D printable and that's going to be a whole other day of work. T

Hello friends! Tomorrow is Labor Day in the U.S. so I'm taking one more day off per the recommendation of friends and family. Apparently this "relaxing" thing is the latest rage and I need to give it a shot. These kids these days and their weird new fads. I kid of course. Mental health is still heal

Hello friends! Today I proudly present the next Spelljammer Ship! Like the previous ships I've made I made a tiny version for ship to ship combat encounters as well as a full sized version that lines up with the maps in the books! Like before this ship is a massive print that only FDM printers can m

Hello friends! Today I worked on the next Spelljammer Ship: The Living Ship! This was a fun model to create from scratch and man it was a lot of work! For the Treant instead of a peaceful looking tree fellow I went with my badass Treant that holds the massive axe. I think raiders will think twice be

NEW SPELLJAMMER SHIP! Hello friends! Once a week I cut loose and just make whatever I feel like and today I wanted to make another Spelljammer ship! Next up on the ship list is the Lamprey Ship! This was a fun model to work on! At first the actual ship is a rather simple design, but the grappling me

Hello friends! It took a lot of work but I proudly present to you all another full sized Spelljammer Ship! The Hammerhead is the largest one I've made so far and it was a lot of fun to model and sculpt up. It took another day's worth of work to get it 3D printable given all the cutting that was need

Hello friends! This week is Shark Week so it only felt right to make this next Spelljammer Ship! This was an excellent project with a nice mix of modeling and sculpting. This took all day to make but sadly I'm not done just yet. Making this 3D printable will require another day's worth of work. and

Hello friends! Its Creative Freedom Friday so I just cut loose making whatever I felt like. Today I took on another Spelljammer Ship! However given Jen and I had to drive up to PA to see family this weekend I didn't get to finish this project given we had to pack then drive up there. That collapsed

This massive ship model took me a couple of days to complete but its finally done and I'm very proud of this project! It was an excellent modeling and sculpting effort though the most time consuming part was actually making this 3D printable. Its a full sized ship lined up with the actual map overla