mz4250

Hello friends! Today I worked on some more requests and made: Aapoph Granitescale - I love working on Pathfinder creatures! This one is a snake folk similar to Yuan-ti but with rock hard scales. The work done here might be useful when I get to the Yuan-ti later this year. For FDM printing print this

Hello friends! Today I have more Patreon request ready! I have for you: Bida Dragon - I love working on Pathfinder creatures! This was a nice mix of sculpting and rigging work. Its kinda funny to work on this impressive serpentine dragon but the little wings kinda look odd. But meh, I'm sure there i

Hello friends! Today I worked on requests and made: Dragonborn Ghoul - ghouls come in all shapes and sizes so this was a pretty cool request to work on today! For FDM printing like most bipeds you will get your best results printing this guy on his back with the claws angled upward so no supports ar

Hello friends! Today I worked on more requests and made: Wind Warrior - I love working on Pathfinder creatures here and there! This was a nice mix of modeling, sculpting and rigging work. Like most humanoids if you're printing this in FDM you should print this on its back with the blades pointed upw

Hello friends! Today I worked on more spooky requests and made: Xulgath - this is a creepy and unsettling looking Troglodyte from the Pathfinder world. I really enjoyed working on this guy and his unhinged looking face. I made two poses given these guys usually attack in groups. For FDM printing you

Hello friends! Today I worked on more of your requests and made: Shoony Paladin - this was a fun model to work on and gave me an opportunity to make a Shoony base file that I'm sure I'll use in the future. The Shoony is a race from the Pathfinder world that are basically Pugfolk and they're adorable

Today I had fun with some of patron requests and made: Tzitzimitl - this creepy gigantic undead from the Pathfinder universe was an excellent sculpting and modeling opportunity! I really do love working on Pathfinder creatures too. This is a gargantuan mini that I had to split into two pieces to ens

Hello friends! Today I have more requests ready! I made: - Human Female Underwater Armorer Artificer - this was a fun model to work on! I like her "Bioshock" themed helmet. Sorta like the big sister set up. But all in all a very fun model to make. For FDM you'd get your best results printing her on

Hello friends! For my last models of the month I made: Deathpact Angel - This was a great model to work on that was an excellent sculpting project. It gave me a chance to make some new wings that I'm sure will be useful in the future. I always enjoy a chance to model something from Ravnica and this

Hello friends! Today I worked on a variety of requests and made: Leshy - this is the adorable Pathfinder version that was a real treat to work on today. Its just so cute! AAAHHHHH! But anyway its a rather small creature so if you do print this in FDM use organic supports and be careful removing them

Today I delved into the Request Board and made: Sinspawn - this is a creepy monster from Pathfinder I really enjoyed working on! Lots of great sculpting and posing. Also that open mouth is just terrifying lol. For FDM printing I recommend printing it on its back though you won't get all the teeth de

Hello friends! Today I made some new patron requests! I made: Dwarf Male Paladin - seemed only proper after I made a Dwarf Female Paladin that a request for a Male would show up haha. It was a nice bit of remixing with some fresh modeling. Full files are in Adventurers - Paladins - Dwarf Paladins. D

Hello friends! Today I had a lot of fun making new requests from the Request Board! I made: Pathfinder Underworld Dragon - this was a great model to sculpt, rig and pose! I love making dragon variants, especially when they're from Pathfinder! Full files are in the Pathfinder folder Tortle Cannoneer

Hello everyone! First off thank you all for your continued support! Last month was very productive as I made over 40 free models! You can see them all in the gallery above. Updates this month are: More Third Party Models! Last month I had a great development with Paizo and Kobold Press giving me per

Today I had a blast working on the Pathfinder Kobold! Its fully rigged and ready for any future projects that require these little guys. I made a base one with a spear to keep the first one simple :) Full files are attached to this post along with presupported for resin users. They're also in the Pa

Good news friends! Paizo has given me permission to make minis based off their works! They must be non-commercial and must follow their Community Use Policy naturally so its no different than dealing with Wizards or Kobold Press works. Either way its nice to get something official rather than just a

Hello friends! Today I worked on two more requests! Sancristan - I love working on Pathfinder monsters! This was a really intense modeling and sculpting project but I'm very happy with the results. Full files are here and in the Pathfinder folder. Half Orc Female Bard on a Piano - this was a fun one

Hello friends! Today I worked on another big request from last month's winner of the 3D printing and painting contest! On top of getting the Mars 2 Pro from Elegoo I also made sure to offer a model as a reward :) This is the Clockwork Dragon from Pathfinder and wow he was a lot of work. A lot more t

Hello friends. Here are three requests from the Request Board completed today: Tarn Linnorm - full files are in the Pathfinder folder. Viking Inspired Human Barbarian - Full files are in Adventurers - Barbarians in all drives. Lizardfolk Render - Full files located in Misc Patron Requests - L - Liza

Hello friends! Today I worked on a mix of requests from winners of last month's contest and some from the Request Board! I made: Psychopomp - I do love working on Pathfinder monsters! This fella is a bit complex for an FDM print but printing it on its back is doable. I uploaded the presupported file

Hello friends! The little trip Jen and I are taking this week in celebration of completing Fizban's last week is going well. I'm relaxing and only modeling when I feel the artist itch. I do love what I do after all. Today I per the request of one of the winners from last month's painting contest an

Hello friends. Today I completed three requests per the winners of last month's 3D printing and painting contest. Cryonax - everyone loves big monkes and tentacles. So why not combine them? Here is a elemental villain that's about as weird as it gets haha. And given this is the request of the winner

Hello friends! Today I made: Pathfinder Glabrezu - Here's a more bulky version of the Glabrezu that's found in the Pathfinder system. Full files are in the Pathfinder folder under Demons. Given Paizo's stance on their content made for 3D this is not safe for commercial use. Kitsune Female Wizard - w

Hello friends! Here are two patron request I was able to complete recently! Unity - I do love making a Pathfinder creature here and there :) Full files are in the Pathfinder folder. Dwarf Fighter 4 - A pretty traditional model but I'm sure some folks will find use for it somewhere. Full files are in

Here are some more requests I was able to work on today! Ceustodaemon - Its always nice to work on a Pathfinder Monster here and there! Full files in the Pathfinder folder. Dwarf Fighter with Dual Hammers - a simple remix request. I added a little extra armor on this fella and some clothing details

Today I modeled a few more requests from contest winners! I made: Taiga Linnorm - here's another cool monster to add to my growing Pathfinder collection. You can print him as one piece but I've also split him up into pieces that are FDM friendly and also I made some separate presupported versions to

Hello again friends. Today was a mix of modeling, printing and painting! First up with have the Linnorm, an pathfinder Dragon! This fella has been split up into pieces for easier printing and there are presupported files as well in the Pathfinder folder. The full stl is here for everyone else. I als

Here are some more requests completed by folks that won last month's printing and painting contest, along with some thank you gifts for the higher tier patrons. I'll be printing and painting some of these later this week :) Gaugath - This devil lord can print well as is, but I recommend tilting him

During the first week of the month I focus on completing tier and painting contest rewards. So far I've made some pretty cool requests, and here are some more! First up we have a Draconic Vine Folk Monk that is currently printing and to be painted. Naturally the starting base model was a dragonborn

Here is a fun new model made per a patron request. There are a lot of flat and plain surfaces on this guy, so a creative paint job will be needed. Given how massive it is that shouldn't be too hard :-) I made two version, one with more details and one more plain in case you wanted to mess with it wi

I had some fun this morning and did a quick remix of my mounted Strahd model. You can print him as is or in a variety of pieces, which frankly would be easier. There is a true headless version and a pumpkin head version :-) You can find him in the H folder. You can find the files here too: https://w

Thanks for tuning in this evening folks as I made an impromptu and random 3D modeling stream! This evening I made a Dire Otter! You can find him in the Appendix A folder. You can fine the files here too: https://www.thingiverse.com/thing:3879021 Onto the next challenge!

Here is the Wood Colossus that I created for one of my Adult Dragon rewards now ready for shipping. He really came out great and I want one for myself now lol The full files are in the C folder under Constructs. You can find them here too: https://www.thingiverse.com/thing:3859077 Onto the next chal

Tonight I made a pretty cool new model based on the request of an Adult Dragon reward. He should print find on his back with supports. I uploaded a version without the base as well. I'll print him when I get back from my training on Sunday :-) You can find him in C - Constructs. You can also find hi

I had the evening to myself following all the travel I did today, so I thought I'd take on another fun challenge :-) Per one of the winners from the 3D Printing and painting contest, here is the Trox from Pathfinder! You can find the full files in the Pathfinder folder. Wyrmlings you can find the st

Tonight I completed two more models. First up, we have the Drow Favored Consort from Mordenkainen's Tome of Foes! You can find him in the MTOF folder under Drow. The stl is here too: https://www.shapeways.com/product/DK77KPT8B/drow-favored-consort I also made a Red Mantis Assassin from Pathfinder! Y

Hey friends! This weekend I have some early birthday plans with Jen so my output will be light. Therefore I'm going to 3D model more requests tonight and stream it on Twitch ( mz4250 - Twitch ) at 730pm EST! Tonight models include: Master of Cruelties from Ravnica Kitsune Noble enjoying a nice cup o

Just made a new guard. You can get the files below or in the google drive