mz4250

Hello friends. Today I worked on some very strange requests haha. I made: Skidpadder Turtle - this massive turtle acts as a beast of burden for Underdark denizens. This is a very large mini so only the largest of resin printers can handle the presupported file. For FDM folks this is a pretty easy pr

Hello friends! Today I worked on Patreon requests and made: Spirit Warrior - this is an undead construct controlled by Space Elves from the Spelljammer setting. Its a pretty wild mech suit basically made from undead flesh of giant space bugs that Elves use in their armies. I had a pretty fun time wo

Hello friends! Today I present to you the Hobgoblin Warriors from the new Monster Manual! this was a lot of work today but I was able to make a rigged up version that I'm sure will be useful in the future. I made two versions with one in a standard melee pose and a ranged one. For the melee version

Hello friends! Yesterday and this morning I worked on the next player character minis for my new campaign I started recently in person with friends. Its Waterdeep: Dragon Heist so you might see more minis from this campaign popping up in the near future. Today I have for you the adventurers my playe

Hello friends. Today I'm flying back home from Puerto Rico. My family did all they could to coordinate my mom's care. She's settled in her new home that's helping manage her care while the rehab continues. Its been a slow process getting here but at least she's safe, well taken care of and hopefully

Hello friends. Today we're packing up the remainder of my mother's old home and spending time with her. Still some last minute coordination needed for her care but so far so good. I took some time today to do some 3D work when I had down time so I continued working on the new Monster Manual creature

Hello friends. Care for my mother here in PR continues. She has adjusted as well as she can at her new home though this has still been tough. We're keeping an eye on how the rehab goes while at her new place while also busy clearing out her old place and coordinating further care. Its become clear t

Hello friends. First off thank you for your kind words this week. The situation here is under control but obviously stressful. After the hospital did what they could we had to transition to home care until one of the rehab and elder care centers were available. We found a place that can take my mom

Hello friends! So tomorrow I'm driving up to NJ to go see family and friends this weekend. I won't be modeling tomorrow and we travel back down on Monday, so Tues is when I'll be back at it. I appreciate your patience while I'm away and I look forward to getting back at it next week. But onto what I

Hello friends! Today I worked on more requests and make: Araumycos - this massive fungus is the largest living creature in Faerun and one of the key aspects of the Out of the Abyss campaign. I made this a terrain piece rather than a traditional mini thus the big square base. It was a neat sculpting

Hello friends! Today I had a blast working on the bugbears from the new MM! The Bugbear Warrior is a pretty traditional bugbear. I like his standoffish looking pose. As for the Stalker I made a female bugbear going for a more sneaky looking pose before she smashes with her big Morningstar. For both

Hello friends! The winner of the Silly Mini contest is the Goblin on the Toilet reading a newspaper! This was a very fun model to make today and thanks to everyone who voted for it, along with the patron who came up with this silly idea. I think this is a really fun concept to just place randomly in

Hello friends! Today from Tome of Beasts I made: Lich Hound - this hell hound is a walking arcane inferno that happily serves a Lich as a loyal companion or guard dog. For the sheer vibes I had fun with rendering this guy. I think it came out neat haha. But for FDM printing I recommend printing him

Hello friends! Today I worked on Tome of Beasts and made: Rum Gremlin - this was a fun model to create today. I like his pose, as clearly he's got something to say but he's gonna finish his swig first. I made a commercial friendly version of him called Goblin Drunkard located in Adventurers - Other

Hello friends! Today I decided to cut loose and had a lot of fun modeling the winner of the Silly Mini Poll, the Goblin Janitor! This was a very silly mini to make, and I'm happy to report I already printed it lol. I'll paint it over the weekend and post pics on my socials. But yes, this was a lot o

Hello friends! Once a week I cut loose and just make whatever I feel like and today I made another monster from Van Richten's Guide to Ravenloft: The Loup Garou!! This is a werewolf far more powerful than the regular one who is the actual source of the course. Full files are here as well as in this

Hello friends! Yesterday was a holiday in the U.S. so I took off. However I did manage to work on some requests a little yesterday and today and made: Armored Owlbear - this was a fun model to put together! Making the custom armor bits was some good modeling :D. Full files are in Misc Patron Request

Thanks to everyone who took part in this month's contest! These came out great! You can see all submissions here But now its time to vote! Prizes include: 1st - a custom mini 3D modeled, printed and painted by me! 2nd & 3rd - a custom 3D modeled mini 4th & beyond - a sticker by Jen! I won't vote unl

Hello friends. Today I had to do a lot of errands so I wasn't able to make as many complex pieces as I wanted to. I was however able to complete a few easier requests: Skeleton Knight - I'm really happy I have a base skeleton model I can use for just about anything. Making an armored up version wasn

Good news friends! Paizo has given me permission to make minis based off their works! They must be non-commercial and must follow their Community Use Policy naturally so its no different than dealing with Wizards or Kobold Press works. Either way its nice to get something official rather than just a

Hello friends! Today I'm happy to share with you all what I'd look like if I was a Beholder lol. One of my patrons made this for fun and sent it to me as Christmas present. I think this catches me pretty well, with my mug of coffee, laptop for modeling, me using a mouse still and painting a mini on

Hello friends! Today the spooky collaboration between myself and Mia Kay at M3DM continues with her new model the Open Coffin! This looks like a really great terrain piece to add to the spooky collection we've been working on this month. Free stl at her patreon's page. Also I made three requests tod

Hello friends! So here is the winner of the Silly model poll from earlier this month. Its a Kobold Artillery Crew using Goblins as their ammunition. I actually looked up how old artillery crews worked back in the day so I made sure the rolls are accurate. Some team members are missing though as they

Hello friends! I got up rather early today so I wrapped up some projects. I swear I'll nap after this haha. Here is the Barghest now completed! Also I was able to complete two more fun requests from the request board! They are a Flamingo Aarakocra Monk and Tortle Bard with bagpipes. I love these uni

Hello friends. I don't do posts like this often, but a sudden urge of inspiration came over me when a patron recommended I make this... and I just HAD to make this! I literally dropped what I was doing and was just like "NO. ART NOW!" So here is a Goblin Worg Rider now ready for your gaming needs :D

Hello friends! Today I completed four more requests from the Request Board! I made: Space Tentacle Elephant - As much as I'd love to make Starfinder models, the publisher never got back to me on whether I can or can't. So here is a generic remake of one of the monsters from that universe! Full files

Hello friends! First off, thank you all for your support! Hitting 5500 patrons is something I never thought would happen when I started this page three years ago but I'm so honored to have so many generous people backing my efforts. You're all wonderful people :D But onto the silliness! Per the Sill

Hello friends! Today I completed some new works I'm rather proud of: Hydra Updated - This was a good sculpting and mesh mixing exercise. Full files are in Monster Manual - Hydra. Goblin Female Rogue with Stuffed Bear / Firbolg - This was a rather cute request I completed today. I made a version with

Today I was able to get more Request Board models completed! I made: Drunk & Angry Dwarf Female Fighter - located in Adventurers - Fighters - Dwarf Fighters. She was a little inspired by the "Angry woman yelling at the cat" meme haha. Classy Bugbear Glaive Fighter - located in Adventurers - Fighters

Hello folks! Today I have two more pieces for you! Sentinel Dispatch - This is construct from Ravnica was a request from last month's winner of the 3D printing and painting contest! Expect to see a printed and painted version in the near future. Full files are in the Ravnica folder. Goblin Monk - Ni

Here are three more requests from the Request Board completed today! Blood Demon - Located in D - Demons and here: https://www.shapeways.com/product/NMRUWAQWW/blood-demon Goblin Ranged with Crossbow - Located in G - Goblins - Goblins Updated and here: https://www.shapeways.com/product/Y7KA7MTLJ/gobl

A while back I touched up my Bugbears with a new stance and weapons, however I did not make the Bugbear Chief nor added the fur. Today I spent time doing just that. Here they are ready to be the tough goblinoids needed in any game :-) Given the mass of these brutes they should print well as is rathe

Last night I needed Hobgoblins for my game so I thought I'd print my updated versions cuz why not? Here they are, the captain, warlord and regular grunt. The bases got warped during printing but at least the models came out good. Full files are in the H -Hobgoblin folder in both drives. They are her

Here is the last Hobgoblin from the MM that I missed years ago. He should print fine as is in FDM with supports and a raft. Printing him on his back is still my preferred method. For resin so long as the blade is pointed somewhat upward you're good with thin supports. Full files are in H - Hobgoblin

This week one of my projects will be to touch up the Hobgoblins. I realize I never made a Captain or Warlord so expect those soon. But first of course is the regular grunt Hobgobbo. This fella if printed in resin should print fine 30 degrees on his back so long as the sword is pointed upward. For FD

Today was another successful Request Board Friday! Today I made the following: Goblin Barmaid - Located in Adventurers - Other PCs and NPCs - https://www.shapeways.com/product/3TGAU2H2P/goblin-barmaid Origami Dragon - Located in D - Dragons - Other Dragons - https://www.shapeways.com/product/GKDYGCK

This evening I'll need some bugbears for my game. I figured it'd be a good time to print some of my new bugbears. But as packed it away I spotted my old one and had to do a comparison. Good lord I've come a long way haha. Its great to revisit my old models and update them for the new technology we h

Per the request board, this was supposed to be a Goblin Trickster Cleric. However, based off the artwork it seemed to work as an arcane caster, as well as divine,or even just a scholar. Good on this little fella breaking ranks from the stereotypes of Goblins and showing the world what little goblino