mz4250

Hello friends! Today I just wanted to put on the record that I am against Generative AI in the arts. It hurts creators on all fronts, be it writing, graphic design, the 3D arts, and more. Even if it didn't hurt the community I'm a part of and love, it's harmful to the environment and it diminishes h

Hello friends! Today I worked on: Noska Urgray - This dwarf brute is one of the NPCs from Waterdeep: Dragon Heist. This model gave me an excellent opportunity to make a new dwarf male body that I can use in the future for other PCs. I actually went ahead an made a new PC out of this by making Dwarf

Hello friends! Today I worked on : Halfling Male Ranger on Blue Dragon - this was a pretty neat and complex request. This is not an easy one to printing in FDM sadly, but if you print it with the arrow pointed upward so no supports are needed near it that would be the best way to go about this. For

Hello friends! Today I had an amazing time making the new Azer from the 2025 MM! For the Azer Sentinel I made a fresh Female Dwarf model that I know will be very useful in the future, then went ham adding all the little Azer details. The Azer Pyromancer was also an excellent sculpting project. I hop

Today I worked on more requests and made: Human Male Fighter 7 Kyiven Rus - this was a an interesting request as I got to work on some medieval Ukrainian armor. Working on all those chains and plates was an excellent sculpting and modeling opportunity! For FDM printing you'll get your best results p

Hello friends! Today I proudly present the last two minis from this amazing book! This was one hell of project that lead to 400+ minis to add to the collection! There were so many fun and unique creatures that came from this project, and I certainly learned a lot from this experience too. Sadly I ca

Hello friends! Today I worked on Tome of Beasts and made: Subek - these crocodile folk are generally friendly humanoids, helping with local projects, selling wares and all in all being good riverfolk. But when the rainy season comes... well.. best stay out of their way. This was a great sculpting an

Hello friends! Today I worked on more creatures from the amazing book Tome of Beasts and made: Serpopard - this monstrosity is a mix between a leopard and drake. I loved working on this model as it was a nice mix of modeling and sculpting work. For FDM printing you'd get your best results printing i

Hello friends! Today I worked on more requests and made: Human Male Gunslinger in Wheelchair - This was a pretty cool request! It was a nice mix of modeling and sculpting. I don't get these wheelchair adventurer requests often so I thought it was neat. For FDM printing you're probably fine as is. Fo

Hello friends! Today I worked on the last Giant in this amazing book the Thursir! This giant is basically a very large dwarf, with all the same hobbies and mannerisms. Given how dwarf like it is, I naturally made a commercial safe adventurer out of him called Dwarf Male Druid w Warhammer, located in

Hello friends! Today I worked on requests from winners of last month's 3D printing and painting contest! I made: Thibbledorf - This is a berserker dwarf from Mithrall Hall covered in spikey armor with a huge head spike. This was an excellent sculpting project and I really enjoyed putting him togethe

Today I tapped into the Request Board and boy things got weird lol. Here is what I made: Birb Stronkman the Kenku Barbarian - this was so much fun to make lol.. Imagine a Kenku Barbarian but in the style of the old timey strongmen from carnivals lol. For FDM printing I recommend printing him on his

Today I had some fun making more minis from the Request Board! I made: Bearded Dragonborn Fighter - this is just such an adorable request! I already love bearded dragons so making a little fighter out of one was just too much fun lol. For FDM printing I'd print him on his back. Resin users get the u

Today I had some pretty random requests! I made: Corrupted Alchemical Black Dragon - this is a pretty wild one where an evil Alchemist controls this Black Dragon with a gas mask system attached to its body. I split it up for easier printing. Full files are in Misc Patron Requests - D - Dragons Ohter

Hello friends! Today I made some new patron requests! I made: Dwarf Male Paladin - seemed only proper after I made a Dwarf Female Paladin that a request for a Male would show up haha. It was a nice bit of remixing with some fresh modeling. Full files are in Adventurers - Paladins - Dwarf Paladins. D

Hello friends! I'm starting a new Out of the Abyss D&D Campaign soon and my players need minis! So on top of requests and Tomb of Beasts you'll see occasionally see posts like this where I'll show you the minis they'll get. Obviously the files are for you all too ;) Today I made: Dwarf Female Paladi

Today was a fun day! I tapped into the Request Board and made: Dwarf Male Artificer - this was a great modeling, sculpting and rigging project! The patron actually made some cool artwork for this character that I was able to use as a neat guide for making this mini. They have their own podcast for t

Hello friends! Next up in Wild Beyond the Witchlight is Elkorn the old Dwarven fighter! This model was a great opportunity to make a nice basic dwarf file that I can use in the future for other characters like this guy :) The full files are in this books respective folder. The free files are also he

Hello friends. Today I was able to complete a few more requests from the Request Board :) Bel on his throne - This was a fun model to work on! I had to revisit my Bel from last year to rig it up then sculpt some more. Full files are in Baldurs Gate - Descent into Avernus - Bel and also below. Dwarf

Hello friends. Here are three models from the Request Board I completed today: Dwarf Cleric with Flaming Hammer - files located in Adventurers - Clerics- Dwarf Clerics in all drives and also below. Half Dryad Female Wizard - located in Adventurers - Wizards- Other wizards in all drives and also belo

Hello friends! Here are two patron request I was able to complete recently! Unity - I do love making a Pathfinder creature here and there :) Full files are in the Pathfinder folder. Dwarf Fighter 4 - A pretty traditional model but I'm sure some folks will find use for it somewhere. Full files are in

Here are some more requests I was able to work on today! Ceustodaemon - Its always nice to work on a Pathfinder Monster here and there! Full files in the Pathfinder folder. Dwarf Fighter with Dual Hammers - a simple remix request. I added a little extra armor on this fella and some clothing details

Today I was able to get more Request Board models completed! I made: Drunk & Angry Dwarf Female Fighter - located in Adventurers - Fighters - Dwarf Fighters. She was a little inspired by the "Angry woman yelling at the cat" meme haha. Classy Bugbear Glaive Fighter - located in Adventurers - Fighters

Today I modeled a few more requests from contest winners! I made: Taiga Linnorm - here's another cool monster to add to my growing Pathfinder collection. You can print him as one piece but I've also split him up into pieces that are FDM friendly and also I made some separate presupported versions to

Here are more requests completed from the Request Board! First we have a Half Elf Artificer, located in Adventurers - Artificers, and here: https://www.shapeways.com/product/CA9UMUVWS/half-elf-male-artificer Then I have a Dwarf Female Barkeep located in Appendix B - Commoners and here: https://www.s

Today I created more models, this time for one of the winner's from last month's painting contest as well as a Tier Reward. I made: Dwarf Fighter w Tower Shield & Warhammer - located in Adventurers - Fighters - Dwarf Fighters. If your support game is strong he should print fine as is. On his back wo

Here is another firey bad guy that needed an update :-) I'll need some for tonight so he's printing right now. For FDM you'd get good results printing him as is with supports and a raft. For Resin I tilted him back about 30 degrees and made sure thing supports were touching his elbows. Full files ar

Here is Bruenor, one of the iconic Dwarven fighters from the Forgotten Realms! This was per a patrons request who's request board post was already completed. I always try to reach out to patrons who's turn has arrived if they're request was already made :-) Full files are in the Adventurers - Fighte

This was a fun model to create today :-) . He should print fine as is if your support game is strong. But printing him on his back works too. The little faucet on his beer barrel might not survive FDM though, but never underestimate those machines haha Full files are in the Adventurers - Clerics fol

Here is a Commission model that I made this morning. Its a bit of remixing of my older model that needed some serious tuning up. Its labeled Dwarf Wizard 2 in both Google Drives and attached below. You may need to download each file individually. Onto the next challenge!

Here is the Dwarven Barbarian with Maul and Mask that I made earlier, now printed and ready for one of my Ancient Dragon patrons :-) The patron requested the fella had a lot of tattoos so I did my best. Not gonna lie, tattoos are really hard to pull off lol. But I did my best. Full files are in the

Here is a new Dwarf Barbarian, with beardless and masked versions per patron requests! You can find them all in the Adventurers - Barbarian folders. You can fine the stls here too: Bearded: https://www.shapeways.com/product/ESZ7NUJ66/dwarf-barbarian-with-a-maul No Beard: https://www.shapeways.com/pr

Here is my next commission project for this month! Given his bow is not touching a cape like I usually do with my other ranged characters, I would print this guy on his back with supports. For resin I would tilt him back 45 degrees and use thin supports. You can find him in the C Folder. Wyrmlings y