mz4250

Hello friends. Jen and I have arrived in Atlanta today for Dragoncon! There aren't too many events today so I did get some down time to model. I worked on some Patreon requests so I made: Loxodon Druid 2 - this was a fun request to work on! I enjoyed sculpting up the little armor details. I'm also a

Hello friends! Today I got back to it and made: Sir Plush the Teddy Bear Guardian - this was a super cute little request that I really enjoyed working on. The patron requested an awakened teddy bear defender so I'm really happy with how it turned out. For FDM you'll get your best results printing th

New Free Mini from Ellas Arcanum! Hello friends! Today I'd like to give a Spooky Art Friend Shout out to my good friend Natt at Ella's Arcanum! Here is a free mini she designed recently for you guys to enjoy! The Angel of Death is a really impressive piece and just one of many that she posts regular

Hello friends! Today I'm working on requests from the request board and I finished this bbeg from Vecna Eve of Ruin, Miska the Wolf Spider! This massive drider demi god was a lot of fun to work on. It was an excellent mix of sculpting, rigging, and modeling work. Also the freaky looking wolf heads w

Hello friends! Today I worked on more mini requests from the Request Board and made: Bugbear City Watchman - this was a fun NPC idea. It was a nice sculpting and modeling project. Full files are located in Misc Patron Requests - Misc NPCs. For FDM printing he should print fine as is with organic sup

Hello friends! Today I worked on two more requests! I made: Drider Goddess - Ok so this one was wild. Its a Drider deity with 16 legs and 8 arms. This is going to be a tough one to print in resin alone so I wouldn't recommend this in FDM. I spent a lot of work making this actually printable after al

Hello friends! Today I worked from the Request Board! It was a batch of requests that were easy to pull off given I had a lot of base models to work off of. I made: Fallen Aasimar Male Paladin w War hammer and Shield - located in Adventurers - Paladins -Aasimar paladins. Human Male Fallen Paladin w

Today I delved into the Underdark today! I made: Drow Bladesinger - there are two versions here with one using scimitars and one using longswords. I really enjoyed sculpting on the spider details on her armor! Full files are here and in Adventurers - Wizards- Elf Wizards. This is safe for commercial

The randomness continued today! I tapped into the Request Board and made the following: Giant Badger Mount - this was part of the next request. I had to make some modifications to my base bridle and saddle model to get this to work but its pretty solid in the end. Full files are in Monster Manual -

Hello friends! Today I had some fun making these pieces! First we have another spooky model as part of my collaboration with Mia Kay this month! This is a terrain piece you can print and scatter around an encounter with giant spiders or drow. Full files are attached to this post but are also in the

Hello friends! Today I went to town making more creatures from this amazing book! Drow Arachnomancer - just look at this proud Drow living their best life lol. When I modeled this all I could think about was this fella returning from another great day at work and giving you a thumbs up as they walk

Hello friends! Today I worked on a mix of requests from winners of last month's contest and some from the Request Board! I made: Psychopomp - I do love working on Pathfinder monsters! This fella is a bit complex for an FDM print but printing it on its back is doable. I uploaded the presupported file

Today's update is the Drider, where I revamped must of the models from the ground up. They should print well as is with supports. For resin I'd tilt them back about 15 degrees so supports aren't needed under the chin. I've supplied presupported files if anything. Full files are D -Driders. You can a

Today I created more models, this time for one of the winner's from last month's painting contest as well as a Tier Reward. I made: Dwarf Fighter w Tower Shield & Warhammer - located in Adventurers - Fighters - Dwarf Fighters. If your support game is strong he should print fine as is. On his back wo

This month the theme for the 3D printing & Painting Contest will be the creatures that live beneath the world we adventure in. From the Drow, Duergar, Mindflayers, Ropers and more, this month will be for those that creep, plot, slither, or crawl in the deep, dark recesses of the realms. To take part

Here is a different take on the Drider Queen per a Commissioned Model request! She's Huge sized but amazingly fits in the Photon if you wanted her in resin haha. FDM is the intended print though, and supports would be needed under her crowned horns with a roof and floors. Given how large she is thou

First off, thanks again everyone for your support! This is my second month at doing this full time and so far its gone very well! Jen and I transitioned to this new life style and so far we've figured out a decent work flow. I'm very happy to finally focus on my art and make cool 3D printable miniat

Here is a pretty cool model idea I got from one of the commission requests: a Drider with a Daddy Long Legs body :-D It was a lot of fun to model! You can find her in the D - Drider folder. You can find the files here too: https://www.thingiverse.com/thing:3899147 Onto the next challenge!

Here is a gallery of all the recent letter D creatures from Mordenkainen's Tome of Foes! Wyrmlings, I hope this can be of some use for you :-) Letter D was probably the biggest collection of monsters from that book, so I'm pretty happy I was able to overcome that hurdle recently! A special thanks to

Hello friends! Today was a tough one in Fort Bragg. Woke up at 3:45, rucked for 5 miles then rucked another 8 throughout the day doing various Civil Affairs themed activities. By 5pm it was over and I was just done for the day. So back in my room I just wanted to relax. And what do I do to relax? I

Here is a neat gallery that can be useful for my Wyrmling Patrons, with all the new Drow I made in one spot. I'll do the same for the Duergar. The reddit post is here if you'd like to help with the upvotes: https://bit.ly/2XqH8jD I'm hoping to update my old Duergar soon :-D . Then its onto the new o

Here is the Drow Shadowblade now printed and painted! I'm going to miss the drow so damn much. They were the easiest paint jobs ever lol. But time for the Duergar! I'm looking forward to this next portion of Mordenkainen's Tome fo Foes. Hmm I should touch up my old files too... Anyway she's in the M

Hey folks! Thanks for tuning in again! It was another fun and productive afternoon :-D Today I made the Drow Shadowblade from Mordenkainen's Tome of Foes! You can find her in the MTOF folder under Drow. Then I made a request happen for one of my Adult Dragon patrons with a funny female halfling rogu

Here is the Drow Matron mother from Mordenkainen's Tome of Foes, now printed and painted! I'm really going to miss the drow and their paint scheme, but looks like the Duergar are no different lol. Anyway you can find the full files in the Mordenkainen's Tome of Foes folder under Drow. Wyrmlings you

Here is the next model from Mordenkainen's Tome of Foes, the Drow Matron Mother! She's printing now so lets see how she turns out! The full files are in the MTOF folder under Drow. You can find the stl here too: https://www.shapeways.com/product/ANR65LH26/drow-matron-mother She's printing now so let

She's definitely my favorite of the new Drow in Mordenkainen's Tome of Foes :-). Plus its nice to mix things up with a lunging lance pose. Full files in the MTOF folder - Drow. You can also get the stl here: https://www.shapeways.com/product/C5VN6QVJA/drow-inquisitor Onto the Drow Matron Mother!

Here is the next Drow in Mordenkainen's Tome of Foes now ready for 3D printing! I don't get to make many characters with lances often so I'm digging the lunging pose :-D She's printing now so lets see how she comes out! Full files are in the MTOF folder under Drow. Stl also here: https://www.shapewa

Here is the Drow House Captain now printed and painted! I'm pretty happy with how this fella game out :-D Full files are in the MTOF folder under Drow. You can find the stl here too: https://www.shapeways.com/product/QRP7BJ4NU/drow-house-captain Next up is the Drow Inquisitor!

Here is the Drow House Captain from Mordenkainen's Tome of Foes! He's printing now so lets see how he turns out :-D You can find him in the MTOF folder under Drow. The stl is here too: https://www.shapeways.com/product/QRP7BJ4NU/drow-house-captain Man this Drow weeks has been surprisingly productive

Here is my final old Drow model, now remastered for our modern 3D printing needs! Now that I've updated my old Drow, I can refocus on the new Drow options on Mordenkainen's Tome of Foes! You can find here in the E - Elves - Drow folder in the Google Drives. You can also find her here: https://www.th

Before I continue working on the new Drow from Mordenkainen's Tome of Foes I felt it was wrong to ignore my old Drow models, thus I'm updating them as I go. Here is the Drow Elite Warrior! I'm following the write up a little closer with a scimitar, shield, and drow leather armor. I thankfully made a

The weekend trip with Jen for my early bday trip was nice. But I'm back and its time to get some more minis done :-). Here is the Drow Favored Consort now painted :-D . I really love painting drow. So damn easy haha A small detail I didn't mention about this model was that he is hiding a blade behin

Tonight I completed two more models. First up, we have the Drow Favored Consort from Mordenkainen's Tome of Foes! You can find him in the MTOF folder under Drow. The stl is here too: https://www.shapeways.com/product/DK77KPT8B/drow-favored-consort I also made a Red Mantis Assassin from Pathfinder! Y

A special thanks goes to Jen for priming and prepping this guy for painting :-). Given this was a resin print obviously I recommend printing him on tilted on his back at about 45 degrees with thin supports. Amazingly the sword came out just fine. FDM wise I'd print him as is and make sure your suppo

Hello friends! This Sat - Sun is another Army Reserve weekend for me which means my 3D output will be limited. Therefore, I'm going to make the most out of Friday by streaming a mini 3D modeling marathon! I'm going to tap into the Request Board, update my old Chimera model, and start working on the

Just painted this for one of my Ancient Dragons :-) . Onward to the post office :-D