mz4250

Hello friends! Today I worked on the little Quasit demons today! I accidentally skipped this fella as I barreled into the Letter R creatures haha. I made a base Quasit model then made three poses. The first and third are dynamic but not FDM friendly. Quasit 2 though is very FDM friendly and will act

Next up in the new Monster Manual we have these hulking demons the Nalfeshnee! These demons use both cunning and brute force to get their way, and all believe their demon lords just one step away from greatness. I had a blast sculpting up this fellow today. I also think its neat that this new versio

Today I worked on requests and had a pretty fun time! I made: Bugbear Barbarian 4 with bunny - This was an adorable request from the winner of last month's contest! Its a Bugbear Barbarian who has a soft spot for bunnies. I mean who doesn't? This is being printed right now so expect a pic of a paint

Hello friends! Next up in the new Monster Manual is the Maraliths! These demons are the pinnacle in martial prowess among the fiends of the Abyss. This was a really fun sculpting and modeling experience. I went above and beyond and made two versions, a male and female. Due to the complexity of these

Hello friends! Today I worked on the Manes Vaperspawn from the new Monster Manual! Given these attack in groups like the regular Manes I made a few poses. That giant mouth is so offsetting lol. For FDM printing you'll get your best results printing these on their backs with the claws pointed as upwa

Hello friends! Today from the new Monster Manual I have for you the Manes! These are lesser demons are are typically minions used by far more powerful fiends. I made two to give you some tabletop diversity as these guys usually attack in swarms. For FDM printing these guys are pretty beefy but you'l

Next up in the new Monster Manual we have the Hezrou demon! This stinky toad like demon was a lot of fun to sculpt up. I'm actually really proud of this because I sculpted it from scratch from a simple sphere. I love modeling and sculpting things from a basic shape like clay here and there. Its a ni

Hello friends! Today I have more Patreon request ready! I have for you: Bida Dragon - I love working on Pathfinder creatures! This was a nice mix of sculpting and rigging work. Its kinda funny to work on this impressive serpentine dragon but the little wings kinda look odd. But meh, I'm sure there i

Hello friends! Today I have for you the Goristro demon and the Gray Oozes! The Goristro is a terrifying giant demon that lays waste to all that lay before it and particularly hates fortifications that dare to halt its neverending thirst for destruction. This is a very large demon to print so printin

Hello friends! Request Month was a lot of fun and I really enjoyed making all these random 3D printable minis for you all. For my last batch I made: MECHA PENGUIN - this was a hilarious request and I loved it. It was a nice mix of sculpting and modeling work. I made two modes for this mini with one

Hello friends! Today from my friend Natt at Ella's Arcanum I have more free minis to share! She made some really amazing Pumpkin Patch Mimics that came out amazing. It hiding as a regular pumpkin patch also makes a great terrain piece. You should def check out her page when you can :) Spooky Monster

Hello friends! For the last models this month I have for you: Dretches - this nasty little demon minions can be a real threat in large numbers. Given these tend to swarm I made multiple poses and as its rigged up if you wanted to make more you can. There is also a swarm of dretches model but that's

Hello friend! Today I'm really happy with my work as I made Female and Male Cambions from this amazing book! I very much enjoyed working on these. For the female I went with a pose that shows she's offering wine if you go with her deal, or something far more dangerous with her flames if you don't. T

Hello friends! Today I worked on the next beast from this amazing book! The Barlgura is a cruel brute of a demon who happened to be a lot of fun to sculpt up today! I made a rigged up version in case folks want to pose it differently. This pose however should print very well in FDM so long as you pr

Hello friends! For my first model this month I proudly present to you the Balor! This is a massive demon who while huge sized I bumped him up in height so he could tower over the players in this terrifying confrontation. For FDM printing you should print him on is back and insert the weapons into hi

Hello friends! Today I proudly present a project I've been working on throughout the week when I had free time. This is Lolth in her true Demon Spider form, and she might just make a cameo appearance tonight for my Out of the Abyss campaign finale! Don't tell my players lol. This was a solid mix of

Hello friends! Today I worked on requests and was able to make: Loviatar, the wife of Bane! This goddess model was fun to make. I don't make sultry models very often so this was different for sure lol. My wife gave me some advice on how corsets work so her feedback was key to the success of this mod

Hello friends. As I continue to go through the more spooky models in Tome of Beasts this month I ran into this fella. The artwork makes him look rather cuddly, so I upped the viciousness a smidge. He's full rigged though if you wanted to make different poses though :) Full files for this Demon Lord

Hello friends! Today's celebration is going well! I had a relaxed time modeling and made another fun mini from the Request Board! This is a demon from the Theros setting and was an excellent modeling and sculpting project! Sorry for it being a little thirst trappy but I guess that's the nature of fi

Hello friends! Yesterday was a holiday in the U.S. so I took off. However I did manage to work on some requests a little yesterday and today and made: Armored Owlbear - this was a fun model to put together! Making the custom armor bits was some good modeling :D. Full files are in Misc Patron Request

It took over a year of work but I'm ecstatic to announce that I'm finished with Monsters of the Multiverse!!!! Here is Zuggtmoy the Demon Queen of Fungi now ready for 3D printing! She was a pretty wild project to put together, from raw modeling up to sculpting and posing. I also made her little fung

Hello friends! Its Friday so I make whatever I feel like! Today I made Yeenoghu from Monsters of the Multiverse as he just looked so cool and couldn't wait til Monday haha. I really enjoyed making this guy from scratch. It was a lot of sculpting, rigging and posing but in the end he came out pretty

Thanks to everyone who submitted pieces for this months contest! Now its time to vote! You can see submissions here. You're welcome to vote for more than one as they're are so many great submissions. I won't vote unless a tie breaker is needed. Prizes are: 1st - a custom mini 3D modeled, printed and

Hello friends! Its time for another 3D Printing & Painting contest! This month's theme are the Fiends! If you got any Devils, Demons, or other denizens of the Nine Hells / Abyss now is their time to shine! I'll also accept Fiend Adjacent, like cultists, PCs that are fiendish, or even a consort / con

Important Announcement: Hello friends! This will be my last models for the month because Jen and I are traveling to Iceland today! We're celebrating being together for now 12 years! Six of those married but that anniversary is June 25 (I'm a good hubby I remembered lol ) We'll be back on March 10. I

Hello friends! Today I proudly present to you all Orcus from Monsters of the Multiverse! This is a fresh model given the original was just a hodge podge remix of many models that deserved a serious update. This took all day but I'm really happy how he came out! I made sure to split him up for resin

Hello again everyone! Today from the Request Board I made: Verbeeg Marauder - Looks like the Request Board has hit some Rime of the Frostmaiden ideas today! This was a nice mix of modeling, kit bashing and sculpting. Full files are here as well as in the Rime of the Frostmaiden folder. Human Male Ro

Hello friends! Today was another fun day working on models from the Request Board! The models I made are: Griffon Folk Samurai - This was a rather satisfying mix of modeling, sculpting, and a little kit bashing. Full files are in Adventurers - Fighters - Other Fighters. Demon Toad - frogs and toads

Hello friends! Today I proudly present to you all the next monster from this book the Molydeus! This demon holds various weapons that represent its demon lord so I included extra weapons that you can fit into his right hand. I recommend doing some sanding prior to insertion just in case. My take on

Friends I proudly present to you all probably the most adorable mini I've ever 3D modeled... the Maw Demon! This is an update to the original from Volos Guide and I'm really happy with how it turned out. Technically you could print this in FDM without supports but I'd use them anyway just in case. I

Today my friends was probably one of the most fun days when it comes to 3D modeling and sculpting! First we have the demon lord Juiblex, the Faceless Lord and the Oozing Hunger! This was an older model from Out of the Abyss that I got to touch up today and boy let me tell you... it was SATISFYING. I

Hello friends! Today I worked on a few projects, but this guy is now done done so I thought I'd share him. Here is Graz'zt the demon prince of pleasure! This is a brand new model given the original was rather dated and beyond updating. However I did keep him in the folder for this model given it was

Hello friends! Today is Mia Kay's turn during this collaborative month and she has this great terrain scatter piece! Its available on her Patreon's most recent post so go grab another free file from her! I'll have my next spooky model ready tomorrow :D Also today I worked on Fraz-Urb Luu from Monste

Hello friends! So big news today! I'm celebrating Nine years of 3D modeling free 3D printable minis! Its been a hell of a ride but I think 4250+ models is a pretty good amount so far haha. Here's my first model I posted on reddit oh so long ago. Just a little black dragon I made in Tinkercad: Time t

Hello friends! Today I worked on two requests from the Request Board! I worked on: Pazuzu the Demon Lord of Air - This was a fun project to take on! Full files are in Misc Patron Requests - D - Demon lords Other in all drives as well as on this post. Werebulette - Not sure where this fella falls on

Hello friends! Today I had some fun! I updated my Demogorgon model from years ago first off. It was a model some patrons were having trouble with so I felt it was long past due to give him a nice touch up. Full files are located on this post for free, as well as in the Mordenkainen's Tome of Foes an

Hello friends! Today I made: Pathfinder Glabrezu - Here's a more bulky version of the Glabrezu that's found in the Pathfinder system. Full files are in the Pathfinder folder under Demons. Given Paizo's stance on their content made for 3D this is not safe for commercial use. Kitsune Female Wizard - w

Hello friends! Here is the last model of the month! He's Alquam, one of the Demon Lords in the Tome of Beasts by the amazing Kobold Press! Full files are in Kobold Press Tome of Beasts - D - Demon lords. I made sure to make a version with no stand for the presupported needs :) And that's that for Oc

Hello friends! Today I made some fun requests happen for the folks that won last month's painting contest! I made: Rat Devil - You know, if you have any rodents near your home they're gonna eventually summon a fiend if you're not careful :P. Full files are located in Misc Patron Requests - D - Devil

Hello friends! Today I proudly present to you a different take on the Succubus. Everyone has seen every kind of sexy succubus online, but Jen suggested a sexy librarian and I loved the idea. Who doesn't love a hot librarian, so why not? Well, she suggested the librarian be carrying a stack of LOTR e

Hello friends! Wow! 5400! This is amazing! Thank you all so much for your generosity in supporting my effort to make free 3D printable minis for the tabletop community to enjoy! You're all wonderful people! Monster Manual Revisited: The Incubus! This week I'm visiting family in preparation for my fa

Hello friends! Today's project was an updated Lamia! I put a lot of work into this lady so I hope you like it! I'll make a male version tomorrow :) Full files are in Monster Manual - L - Lamia. That's all for now. Enjoy!

Here are two more fiendish requests I completed today! Thraxxia of Graz'zt - Daughter of Graz'zt, the demon lord of temptation. She's supposed to be a "super succubus" so naturally I used my old succubus but obviously did some heavy editing. She gave me some ideas on what to do when I update my actu

Hello friends! Its time for another 3D printing and mini painting contest! This time the theme are Fiends! Got a demon you're rather proud of? A devil bbeg that terrorized your table? Maybe a yugoloth npc that helped then betrayed the team? Time to post them here! Rules are: Post your piece below in

Here are some more requests I was able to work on today! Ceustodaemon - Its always nice to work on a Pathfinder Monster here and there! Full files in the Pathfinder folder. Dwarf Fighter with Dual Hammers - a simple remix request. I added a little extra armor on this fella and some clothing details

Today I modeled some fun requests from the Request Board and some Tier thank you gifts. I made: Aseroth the Winter Warlock - located in D - Demon Lords Other Gnome Male Battle Smith Artificer - located in Adventurers - Artificers Lich Male Bard - located in Adventurers - Bards These were pretty fun

Hello friends. First day of my Army Reserve Annual Training is going fine. Masks and social distancing were enforced, and so far its been fine. I sadly couldn't model much during my down time, but I can a least make this post. So its time for the next 3D Printing & Painting contest! This month's the

For my last models in July I present to you the remaining demons from the Monster Manual! The Shadow Demon and Yochlol weren't too difficult to update given they were already pretty solid. The Vrock though... sheesh... that had to be recreated from scratch. I'm pretty happy with the end results, and