WAN ANIMATE 2.2 V2 IMAGE TO VIDEO TO VIDEO KING!
EDIT 3 September:
NEW RUNPOD CUDA 13 TEMPLATE!
I’ve spend the last few days, completely rebuilding my RunPod ComfyUI template from scratch.... The previous template was getting very outdated and was starting to cause problems with newer GPUs, ComfyUI versions and recent workflows, so please use this new template from now on.
The new template uses CUDA 13, supports newer GPUs like the RTX 50 series, comes with SageAttention preinstalled, automatically keeps ComfyUI updated and works with my new RunPod installers.
HOW TO USE THE NEW TEMPLATE
I made a quick video showing exactly how to deploy it and use the installers:
👉 https://youtu.be/9wlUXXyy9mE
IMPORTANT: When choosing your GPU, use the CUDA 13.x filter on RunPod
The old RunPod template is now completely retired, so use this one for all new installs going forward.
To use the installer use this command:
bash "WAN2_2-ULTRA-AUTO_INSTALL-RUNPOD-NEW.sh"
I WILL SPEND THE NEXT FEW DAYS UPDATING ALL PREVIOUS RUNPOD INSTALLERS TO THE NEW TEMPLATE SO IF THERE IS AN INSTALLER THAT I FORGOT LET ME KNOW.
EDIT: COMMON ERROR AND FIXE PLEASE READ:
"self and mat2 must have the same dtype, but got Half and Float8_e4m3fn"
it is a wanvideowrapper node update issue that is not up to date
go into the ComfyUI_windows_portable\ComfyUI\custom_nodes folder
and delete the ComfyUI-WanVideoWrapper folder
then if you click on the folder path, type cmd press enter, it will open a cmd window in that folder and inside you can type:
git clone https://github.com/kijai/ComfyUI-WanVideoWrapper
..\..\python_embeded\python.exe -m pip install -r ComfyUI-WanVideoWrapper\requirements.txt
it will clone the latest version of the node and install the requirements, then you can reopen comfyui and redrag and drop the workflow in again.
PoseAndFaceDetection
[ONNXRuntimeError] : 1 : FAIL : Non-zero status code returned while running QuickGelu node. Name:'/model.0/act/Mul/QuickGeluFusion/' Status Message: CUDA error cudaErrorNoKernelImageForDevice:no kernel image is available for execution on the device
It's usually a 5000 series GPU issue (thanks Nvidia), so for those who have the same error, you can try this:
go inside the ComfyUI_windows_portable\python_embeded folder, click on the folder path, type cmd press enter, this will open a cmd window inside that folder and there type:
python.exe -m pip uninstall -y onnxruntime-gpu
python.exe -m pip install --upgrade "onnxruntime==1.20.1"
finish the install and then relaunch comfyui if everything else was installed
Hey everyone! I've created a 1-click installer for "THE NEW OPEN-SOURCE IMAGE TO VIDEO TO VIDEO KING", called "WAN ANIMATE 2.2 V2". And it’s AN AMAZING VIDEO MODEL that lets you replace ANY character in a video with just a single reference image… or take the motion from one clip and transfer it perfectly onto another character WITH INSANE PRECISION AND with my new workflow, you'll be able to replace ANYTHING inside a video, character, outfits, objects, animals, etc...the sky is the limit!
You can check out the video right here: https://youtu.be/apd68jTrxYc
The workflow: https://www.patreon.com/posts/141515195
The installer of course automates the entire install process for comfyUI and the models downloads!
LOCAL INSTALL!!! RECOMMENDED TO START FROM SCRATCH SINCE YOU NEED THE LATEST COMFYUI TORCH VERSION + SAGE ATTENTION AND TRITON INSTALLED FOR THE BEST SPEED POSSIBLE!
Download the WAN-ANIMATE-COMFYUI-MANAGER_AUTO_INSTALL.bat
Run the bat file
Wait for the install to finish
The webui will launch, load the WAN_ANIMATE_ULTRA_WORKFLOW.json file and there you go😎
DON'T FORGET TO GO UPDATE COMFYUI BY GOING INSIDE THE UPDATE FOLDER AND RUNNING THE COMFYUI UPDATE BAT FILE!!!!
IF YOU ALREADY HAVE COMFYUI INSTALLED USING A PREVIOUS INSTALLER:
Download the WAN-ANIMATE-MODELS-NODES_INSTALL.bat and place it in the ComfyUI_windows_portable\ComfyUI folder
Run the bat file
Wait for the install to finish
???
Profit 😎
IF YOU GET AN ERROR WHEN LAUNCHING COMFYUI AFTER USING THIS INSTALLER SAYING "AssertionError: Torch not compiled with CUDA enabled" it's ok don't panic.
Just go inside the python embedded folder, click on the folder path, type cmd press enter, this will bring the command prompt window and there type:
python.exe -m pip uninstall torch
python.exe -s -m pip install --upgrade torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu128
--->replace cu128 by your cuda version (if you don't know your cuda version just open a new cmd window and type nvcc --version it will then tell you at the end Cuda compilation tools, release 12.8, V12.8.93 or something different like 12.6, in that case just use cu126 instead of cu128)
IF YOU ALREADY HAVE COMFYUI INSTALLED AND JUST NEED THE SAGEATTENTION AND TRITON TO INSTALL:
Download the install_triton_and_sageattention_auto.bat and place it in the ComfyUI_windows_portable\python_embeded folder
Run the bat file
Wait for the install to finish
???
Profit 😎
IF YOU ARE USING RUNPOD:
Create an account if you haven't already: Runpod
When selecting your GPU on RunPod, make sure you click on Additional Filters → CUDA Versions → CUDA 13.0
Then choose a GPU, click here for the comfyui template (aitrepreneur/comfyui:3.0.1-cuda13)
Then click deploy, wait for everything to finish and then click on port 8888 and then drag and drop the WAN-ANIMATE-AUTO_INSTALL-RUNPOD-NEW.sh file on the left side of the UI then click on the "Terminal" icon on the right side on the UI
Copy and paste this line then press enter:
bash "WAN-ANIMATE-AUTO_INSTALL-RUNPOD-NEW.sh"
Wait for everything to be installed
Then go to the port 8188
Load the WAN_ANIMATE_ULTRA_WORKFLOW.json workflow and there you go😎
Also use the command:
tail -f comfyui.log
inside the workspace/logs to get the real time logs
PS: Once again, sorry for being quiet the last few weeks, you guys know the drill by now, if not: A Quick Update on Health, Support & Gratitude ❤️ | Patreon
As always, supporting me on Patreon allows me to keep creating helpful resources like this for the community. Thank you for your support - now go have some fun😉!