Exclusive: MMMini Leopard Gecko!! (+Updates!)

*** THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Members can purchase it once re-released, according to this Schedule.

Hi Everyone!

Introducing the new Subscriber Exclusive MMMini Leopard Gecko!!

This mini is 100% print-in-place, and requires no supports.  Its a quick and easy print that scales down very well.  I've included both regular and keychain versions (with head and tail keychain hole options).

Check out a little preview video HERE.

There are also a pre-painted 3MF for those who want to print it in multicolor!

I hope you like it!
Matt

*To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

Side-Note: I also Updated the original Leopard Gecko and the Subscriber Exclusive Eye Licking Leopard Gecko designs to now include a 3MF files! If you already have those files, you can get the updates by redownloading the latest version from wherever you own it. Otherwise, the original Leo Gecko is available to purchase in all of my STL shops (Members, don't forget to use your 50% OFF coupon code) and the exclusive Licky Leo Gecko can be purchased from the Vault link in the Hub post! *This is an update to an older file and Not a release included free with membership.

Pictured MMMini Leo Gecko Prints use the following filaments***
(reference the numbered prints in last image of the gallery)

(1) iSanmate red+orange, BambuLab Matte Bone White, Ziro Matte Black, Ziro Matte White
(2) iSanmate blue purple, Ziro Northern Lights , Ziro Matte Black, Ziro Matte White
(3) Cookiecad Sunrise Mixer, Ziro Matte Black, Ziro Matte White
(4) Ziro Macaron

3D Print information:

• MMMini Leopard Gecko:  Includes regular and keychain versions (head keychain hole or Tail keychain hole). Print-in-Place.

• Multicolor 3MF files! (Works with PrusaSlicer, Bambu Studio, and Orca based slicers)
  - Generally, when using Orca-based slicers for non-bambu printers, you will want to use File > Import rather than “Open Project”.  Then just set the filament slot colors and enter the recommended print settings listed here.

• No supports needed. 

• 10% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)

• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

• This should generally scale down to about 50% with full articulation, on a well calibrated printer.  Your mileage may vary.
  
  *To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
  
  ***Paid Links.  As an Amazon Associate I earn from qualifying purchases.