TINY CRYSTAL DRAGON + LONG TAIL!
This was a JULY Design and has been Archived! If you were subscribed in July you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in August, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the August Models will be in the August posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderAug23
https://www.myminifactory.com/users/Cinderwing3D?show=store
------------------------------------------------------
Update: Community MOD attached below!! TINY Crystal Dragon KEYCHAIN VERSION! Community Mod made by Discord Tag: "Jerm240"
--------------------------
Hi Cinders!!
I have a fun new Tiny Model for you all! It's a TINY SPIN on the Crystal Dragon! I have revamped the 2022 Crystal Wyvern into a Tiny Crystal Dragon with more articulation! PLUS, since the original Crystal Dragon was made with a Long Tail Version, I thought it would be fun to include this model with one as well!
Files Included:
Tiny Crystal Dragon
Tiny Crystal Dragon - LONG Tail
The long one is a really fun print at 100% just over 5feet 3inches! I recommend printing it at 100% as it's the strongest, but it has also been tested at 75%! I hope you all enjoy! :)
Was made with Tri-color filament! : HERE
-Tracy
------------------------------------------------------
July Models:
Tiny Crystal Dragon & Long Tail Version - RELEASED
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins (Jazzy and Turk) and Test Team for all your hard work!
Comments (48)
Is this a file that is still available? Cannot find it on MMF.
https://www.myminifactory.com/object/3d-print-tiny-crystal-dragon-309181
where can I find the community mod for the long tail?
its included in the files
Hi, Where can I find this file now? I tried on Cults3d and Myminifactory and don't seem to see it. Any help would be appreciated. Thanks.
Hello there, Would someone be able to help me find the file to create the tiny dragon keychains with the full dragon.
You can add the keychain hole yourself, its an allowed mod! Most slicers can do this with the use of negative modifiers!
is it correct that this one is way smaller than the rose extra long necklace? it is only around 130 grams and 12 hours print... is this the correct size?
im new here, just created patreon to subscribe to some artist. trying to understand this, even after we subscribe, we dont get access to old stuff unless we buy it aswell? i was looking for a mini dragon to print and came to this, but cant find download.
So as a new subscriber as of September you get access to the as of now unreleased September models and everything that is a Subscriber Exclusive. You can download all those under the Exclusives Tag--> https://www.patreon.com/cinderwing3d/posts?filters%5Btag%5D=Exclusives We also have these links in the pinned Welcome and Info post. Hope this helps!
Update: Community MOD attached below!! TINY Crystal Dragon KEYCHAIN VERSION! Community Mod made by Discord Tag: "Jerm240" I cannot find this keychain file. Where do I find it?
As this file has been archived it has been added to the available files on MMF/Cults
Update: Community MOD attached below!! TINY Crystal Dragon KEYCHAIN VERSION! Community Mod made by Discord Tag: "Jerm240"
I have always beefed these up because I know my Grandkids are going to give them a real work-out. I use 5 walls on smaller (baby) sized models at a 0.16 layer height and 7 walls on full size prints at 0.20 layer height. I also go with 40% infill (gyroid) because I want them to have some weight. It works for me ...
same here , I printed 4 of them , 3 failed. I tried 20% 30% 2 walls , 3 walls, all failed. It breaks in half when I take it off the bed
I've tried to print 4 of them and each time there have been issues. My daughter wants one but mama just can't figure it out! I have made sure my bed is as level as possible and I scrub the glass plate with dawn and water after every print. I'm printing with .4mm nozzle, .2 layer height, 20% infill. Any other suggestions?
I'd recommend and brim!
i printed this at max on a kobra max. final result? 3meters and 12cm long
I've had good results with all the Cinderwing models I've printed so far on my Ender 3 with a .6mm nozzle, .2 layer height, 2 walls, 25% cubic infill. Until I get an SKR 3 for it, I've been using rafts and so far it's been good with the rainbow PLA I've been running @ 195 C.
Printed two of these and my daughters LOVE them. I did 3 walls and 15% infill with adaptive cubic and they printed beautifully. Both P1P and X1C. Has anyone printed it smaller than 100% on a .04 nozzle?
I was just playing around with it. I printed it at 50%, 10% infill 3 walls, layer height .2 first layer .3, with outer and inner brims on my X1C. It turned out pretty cute. 75% 2 colors worked well too.
I'm printing on ender 3 s1 and bambu carbon, both are .4 nozzle with a .2 layer height. I did go to 4 wall loops and that seems to make the links a little more robust??? it maybe just the filament but they seem to hold up better?
I've always opted for additional wall loops to try to help "kid proof" my models. For the smaller / baby models I use 5 wall loops at 0.16 layer height and for the larger models I go up to 7 wall loops at 0.2 layer height. I'll also usually dial up my infill to 40% or so just to give the models a little more "heft". It's probably overkill, but I'm keeping 4 young "active" grand daughters busy with these so it's worth it to me :)
Mine worked amazing did 2 different sizes
what nozzle are people using? my default is 0.6 but most of mine fused together. wondering if it’s that or the older filament
i use .4 nozzles and have had no issues with any other models, Have not tried this one yet
I had about 10 spikes not print correctly but all of the rest did. Any suggestions? Printed with PLA on Bambu P1P at all default settings.
Yeah mine unfortunately fails on the first layer of the third spike and then several others after that. I quit trying after 4 failures..
Any chance of a longtail version coiled into a rectangle to suit a resin printer bed's shape please? Would look stunning as a display
Unlikely!
I have two going right now! I cant wait for this to be done!
it will fit on any plate 200x200 or larger
Yes! It can be sized down to 75% as well!
What's the build plate size on the long one?
All Cinderwing models, including this one, fit on a standard Ender 3 plate.
How long did it take to print, and how much filament?
Wait, long tail crystal dragon? Is there one for FDM printing? I tried printing the resin long-tail one on an Elegoo Saturn but I couldn't get the supports to come off cleanly. I'd LOVE to see a long-tail crystal one that I could print on FDM! [Edit: and I love this guy, too! I'm warming up the Prusa right now to get one printing!]
There is not, and likely will not be a long tail Original Crystal Dragon. It's about as long as it gets already. The Resin Stacked one is actually one of the very first community mods.
is it still june?
wow!! what is the build plate size for 100% giant tail?
Looks like it'll fit on a Prusa! It's 192x192x20mm.
Woah that's super long
Wayyyyy cute and longer than me at 100% 🤣
Would love to see more painted 3mf files from you!
Awesome! The tiny dragons and the frogs are my favorites
OH! A baby! Like, a BABY baby! <3 So cute!
Woah!
So cute!