Lunar Dragon!
This was a JUNE Design and has been Archived! If you were subscribed in June you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in July, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the July Models will be in the July posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderJuly23
https://www.myminifactory.com/users/Cinderwing3D?show=store
------------------------------------------------------
Hi Cinders!!
Thank you all for being so patient this month - I know we only have a few days left! I hope you all enjoyed the fun models! This is the last one for the month, please check the list below to make sure you got them all.
This is the LUNAR DRAGON! Made with LOCYFENS Galaxy Rainbow and AMOLEN Glow in the Dark for the moons. Next month the will be a special exclusive based off this model! ;)
As a BONUS I have also included the .3mf file I used to print the release photos model! I created it in PrusaSlicer so it should work in multiple programs!
-Tracy
------------------------------------------------------
June Models:
Tiny Hammerhead Shark - RELEASED
Butterfly Dragon Tadling - SUPPORTER EXCLUSIVE - RELEASED
Baby Ocean Dragon - SUPPORTER EXCLUSIVE - RELEASED
Baby Loch Ness Monster and Collab Loch - RELEASED
Lunar Dragon - RELEASED
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (support@cinderwing3D.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins (Jazzy and Turk) and Test Team for all your hard work!
Comments (50)
like always, I never got my june invite on mymini, happens every month it seems now
If you are missing months please send an email to contactcinderwing3d@gmail.com or file a ticket on Discord. I cannot provide support via Patreon messages or comments. <3
What filament did you use? It looks amazing.
It's listed in the post.
Did you run the glow in the dark filament through an AMS? I was planning to use glow in the dark filament for my print of this dragon, but I see that the glow in the dark can potentially damage the AMS.
I've run glow in the dark PLA through mine several times with no problems.
https://www.tiktok.com/t/ZT8dyBqqH/ I’m done painting the crystal dragon and I’m trying to figure out what color to paint the lunar dragon :( or what cool elements I want to add color wise( maybe magnetic shifts idk). I have a tail keychain I have prepped and ready and thinking I’ll hydro dip it.
I printed one and it turned out great!!! I have a crystal dragon that I need to finish painting(just started) and I’m going to get to that next :)
Which printer is it?
How did you do that with the filiment
Its a multicolor printer!
Amazing model!
How do I get it where I can select just the moons? Using bambu p1p with ams
Use the provided 3MF file!
Omg that Lunar Dragon is gorgeous.
I feel really dumb asking, but is there a way to make MMF work? The website breaks everytime I go into it and I have never been able to purchase an archived design.
it works fine for me, ive bought almost every model. where does it go bad for you?
Who’s printed on P1P? How long did it take?
The Luna dragon took a long time on my P1P due to the complicated details but still came out awesome. Took around 16hrs
This is so cool! I can't wait to print it. will there be a baby version? I think it would be very cute.
Thank you so much this has been a great month. I loved all the prints
finished my luna dragon, love it so much, thank you!
I have a P1P fairly new (1 week) I’m getting a error message when trying to slice. 1301 manifold error or something like that. Will have to check again after I finish the one on printer
You can ignore those messages! Slice and roll!
Curious why the colors are on the 1st and 3rd on the AMS & not 1st & 2nd?
Human error haha
Just started a multicolor print.... looks like I'm gonna have to stay up late tomorrow to see it finish! Don't know if I am patient enough to wait until Friday morning
I have 11 hours left on my print. I decided to do it in Onyx Black Glitter. It’s going to be amazing
I CANNOT believe how well mine turned out. Slightly scaled up and the detail …..WOOOOOOW
Will there be a winged verson of this one its so beatifully
I like it! Short tail version too please :)
I just bought some coextrusion filament that's dark blue, purple, and black (Amolen brand) and I went back and forth through my Cinderwing3D library looking for just the right dragon to print with it, but I wasn't coming up with the perfect match. Then you released this! It's perfect for that filament, of course, and also a lovely addition to the dragon family!
Gorgeous design.....but my video card is taking a ride on the struggle bus to get it sliced....(the color version).
Love this!!
This is beautiful!
What is the length of this model at 100% size?
love this!!!!
Yes! All the lunar things next please! Turtles and Frogs and ahhhhh <3
I am an astro-photographer, and I am in love with this!!! If you are open to requests, a star dragon, or a galaxy/milky way galaxy (milky way is my specialty) would be absolutely amazing!!!
Love it... Have to finish this Gemstone Dragon order first and then Lunar is gonna be next!
Love it! Here to request a short tail variant for all new dragons :) cuts down on print time and improves success rate on scaled down prints :)
This is why the babies exist. I'd suggest checking them out!
So pretty! I hope this will look just as nice when only using single filaments.
it does!!!!!
Gonna have to shrink it down for X1C, Collides with Prime Tower. Looks like it is printable at up to 97% size when using AMS on my X1C if I take off avoid extrusion calibration region
you can move the prime tower to another location. i got lucky and dumped it somewhere else and sliced fine. The prime tower does shift slightly but if youre patient you can get there (if you want it to be full size)
I was curious if you were or already have made a butterfly 🦋 model
She has already made one!
Oh yay!!! I cannot wait to print this one!
I christen it - The Moon Knight Dragon 😂