Bone RattleSNEK!!! 3 Sizes!!!!!! [ARCHIVED]
This was an OCTOBER 2025 Design and has been Archived!
If you were subscribed in OCTOBER 2025 you will receive an email from MyMiniFactory within the week to access the archived files from that month. https://www.patreon.com/c/cinderwing3d/collections
HEY CINDERS!
Today's release is a bit interesting! I saw a few comments asking for some bone snakes and thought HEY that would be fun for Halloween! I took it an extra step and made RATTLESNAKES because there are a ton of them around me 😅!!!! This release has 3 different sized sneks, a Tiny, a Baby, and a Full Size reaching around 3.5ft!
As a reminder it is blanket approved to add holes to my models for things like keychains, magnets, holes for straws! Feel free to join the Discord and folks will be happy to teach you how!
- Tracy
-----------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
DUDv2 Bone Rainbow, Flashforge Purple Pink Gradient Glitter
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team! Being part of the Tiny style it can print as low as 40% but it will depend on your printer!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
Design Drops - October 2025 Models:
Pieurtle, Apple Pie Turtle
(2) STL files
(1) .3MF file (has both styles!)
Pumpkin Spice Cookie Dragon
(1) STL file
(1) .3MF file
BABY Pumpkin Spice Cookie Dragon
(1) STL file
(1) .3MF file
Tiny Cardinal
(1) STL file
(1) .3MF files (both colors)
Bone RattleSNEK
(3) STL file
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
HEY CINDERS!
Today's release is a bit interesting! I saw a few comments asking for some bone snakes and thought HEY that would be fun for Halloween! I took it an extra step and made RATTLESNAKES because there are a ton of them around me 😅!!!! This release has 3 different sized sneks, a Tiny, a Baby, and a Full Size reaching around 3.5ft!
As a reminder it is blanket approved to add holes to my models for things like keychains, magnets, holes for straws! Feel free to join the Discord and folks will be happy to teach you how!
- Tracy
-----------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
DUDv2 Bone Rainbow, Flashforge Purple Pink Gradient Glitter
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team! Being part of the Tiny style it can print as low as 40% but it will depend on your printer!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
Design Drops - October 2025 Models:
Pieurtle, Apple Pie Turtle
(2) STL files
(1) .3MF file (has both styles!)
Pumpkin Spice Cookie Dragon
(1) STL file
(1) .3MF file
BABY Pumpkin Spice Cookie Dragon
(1) STL file
(1) .3MF file
Tiny Cardinal
(1) STL file
(1) .3MF files (both colors)
Bone RattleSNEK
(3) STL file
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (19)
How can i purchase this print?
HI, is there any way to get this file anymore? im new to you and this thanks!
You can purchase it from MMF!
Good day! I did not receive any notification for this one... How can I redeem it?
Please direct message me for help with archive issues :)
How stinker cute! Do you think you have any plans (or have already designed and I missed it) for a "live" rattlesnake? After growing up in the desert, I've been dying for a rattler!
🤫
This is sooo cool!
I downloaded and there are only Stl files. There is no 3mf. I read above that there is a 3mf.
i am sorry, i guess there is no real need for 3mf except ease of making sure the settings are the same as yours. its ok, i just loaded into a generic program. it will probably work
what filament was used?
Its in the post!
So cute, can’t wait to print these.
Oh my lanta! I am so excited to print this. What a cutie 💓
Oh man, you need to make more bone stuff!! Your bone dragon, wyvern, and t-rex are extremely popular and I can imagine this will be too!
Eeeek I love this!!!!
Omg I was literally just in my room thinking about stuff I could print as cat toys because I'm getting one in January. This is purrfect! I'll probably add some extra infill in case kitty get rough with it.
My kitties love everything that is 3D printed! It is so interesting to me that they dig it so much
Ok. Very nice