Unicorn Dragon
This was an MAY Design and has been Archived! If you were subscribed in MAY, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in JUNE 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the JUNE Models will be in the JUNE posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CINDERJUNE24
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Last release of the month! - Unicorn Dragon!
Hi Everyone!
It's been a fun month of models and I wanted to finish off with a Cinder-style Dragon for you all! This Unicorn Dragon rendition does have a couple pokey pieces, so I am working on a softer version as well that will be released in a later month.
Tester Kelcy's Kreatures and I both made a .3MF file of this Dragon! Thank you Kelcy! The Unicorn Dragon also looks amazing in a single Tri-color (shown in the attached pictures).
------------------------------
Also, I love seeing all the beautiful Great Stone Dragon prints on our Discord Chat! I know there are some that are having issues with the wings as well. Please know, that we hear you and I am working on fixing the issue. There is no set time frame for this testing.
Filaments used: (link below)
Blue Dragon: ZIRO Pure, Stronghero3D Mirror Chrome Purple/Blue, Filamentium Gold
Black Dragon: Cookiecad Pink Star Stuff, Bambu Galaxy Nebulae, Bambu Silk Gold
Single Color: Amolen purple/bluegreen/orange
Thank you all for the great month! Thank you Testers and Admin Jazzy! I have some more tiny models coming out starting next month! Excited to see what you all think! See you in JUNE!
Please remember to check the released file list below and make sure you download everything for the month!
- Tracy
----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)
Please join our discord chat below for more help and discussions.
Filament: https://www.amazon.com/shop/cinderwing3d
------------------------------------------------------
MAY 2024 Models: HERE
Rose Snake - RELEASED
Exclusive Baby Mushroom Dragon - RELEASED
Tiny Crystal Spider - RELEASED
Tiny Fairy Spider - RELEASED
Great Stone Dragon - RELEASED
Unicorn Dragon - RELEASED
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (49)
When is the other version going to release? I wanted the softer version and as others have said a different horn.
When its ready! It's still in testing :)
Did I read that there was going to be a different horn option? I'm having trouble printing the horn - I've played with settings (flow, speed, pressure adv), filaments, etc...and towards the top, just doesn't look good. Not sure what's happening... Wouldn't mind a more unicorn style horn, or something more cone-like.
Eventually, much like with the crystal dragon horn tips, if you are having issues please slow down the print
I am having tons of issues with the horn. Everything else is fine, even slowing down a lot didn't help. That horn just does not do it for me for some reason.
I have tried a ton of different things, including using my super ridiculous settings for fine prints in PETG (that is a thing for fitment). still will not print right.
Hey everyone! Please understand that as long as you were subscribed for May you get the model via the MMF archive. If you did not get your email PLEASE REACH OUT! Jazzy and I cannot help you via comments. All the information for how MMF works is in the Welcome Post! https://www.patreon.com/posts/welcome-to-info-71819754
I didn’t get this and am looking for this dragon
I am fairly new to Patreon - I only joined in May to follow you :-) My question is this: Where am I supposed to get the e-mail from that gives me access to this file, please? I have a My Mini Factory login, but could not seem to find any indication of where to look there. I also get daily emails from them to promote all sorts of stuff - usually mini resin things that I can't use, but could not seem to find anything in their emails either. I think I am missing something - perhaps I need to link the Patreon and MMF accounts? Please help as I would love to be able to access these items :-)
Please message in!
May I ask what color filament in Second picture?
The filaments are listed in the post :)
I am not seeing the unicorn dragon in the email, just the stone. Am i missing something?
I do not email files to you! They will be on your MyMinifactory archive!
Reminder everyone, the MMF archive emails went out June 1st! Please check your inboxes for your redeem emails!
I did not get one - I got the sneak peak email and others from before, but nothing on June 1
I am a little bummed this isn't available here or on MMF. How long does it take to get the MMF email? Most creators I follow send the MMF link a day or two before anything is removed from Patreon.
i found a link in my email. i felt the same way
printed the unicorn off overnight and What can i say, I love it with the aussie's version of a rainbow filament. well done Design team
This was released for 3 days only? I have to wait for an email now to download it from somewhere else? Seems like a very short time.
Yep, it's like this each month, the emails were sent this morning! Should already have it!
I’m on my 3rd one @100% I’ve only done them in a single colour but they look Ah-mazing!! I will try and find a place to upload pictures. I can’t wait to show yall the 2nd one. I am in love!!
Beautiful as always! :3 <3
What about adding wings to make it a Pegasus? Just a thought!
This is an interesting interpretation of a unicorn. Usually artists depicts them with something that resembles more of a narwhal horn. I've never seen one that has more of a rhino horn. Can't wait to see how it prints.
Omg! This is a dream come true! If there will be a baby and a tadling my world will be complete and perfect 😀❤️ thank you!
More then likely, eventually haha
Can this one be scaled down safely? and or will there be a tadling?Ive already sent it to the printer!!!!:)
60-100% as always!
What is the length of the unicorn dragon printed at 100%?
Just started it on my printer!!!! Can’t wait to see the outcome!!! And omg a tadling and a baby one would be even more perfect! I can’t wait!!! Fantastic design!!!
Yay! This will be a popular one. Got a tricolor one going on 1 printer and the 3 color 3mf up next on my a1 mini
So excited
Omg I love
I can’t wait for my daughter to wake up and to tell her!! Her two favorites.. unicorns and dragons!!
Heat 🔥
I'm so excited to print this it looks awesome
I have a perfect filament for this!
man... I know yall got cute horns....I still appreciate work that went into it tho so thank you
Awesome Release
Wow this was a great ending to the month
Very excited about this one! I love unicorns!
Has it been tested down to the 60% as well?
Yes, the single color in the pictures is 60% :)
Oh! I'm gonna be stoked for the two legged version!!!!
This is awesome 🙌❤️
ITS A FRIGGEN UNICORN DRAGON!!!! MY LIFE IS COMPLETE!!!!
Omg. Tracy…. I love you tooooooooo!!!!!!!!!!
This is awesome!!!