Axolotl Dragons!
This was an APRIL Design and has been Archived! If you were subscribed in APRIL, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in MAY 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MAY Models will be in the MAY posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CINDERWINGMAY24
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Cinders!
This design has been asked for for awhile! Bringing you all a WINGED and WINGLESS version of the AXOLOTL DRAGON!
The wings are a rotating ball socket design and extend to hold in place!
Thank you to one of our Testers, "Toad", for the MMU versions for multi-color! The pictures above are only single color, please see out Discord Chat (link below) for pictures of multi-color from our test team!
Print-in-place and tested between 100% & 60% for strength and articulation!
(Please see below link for filaments used)
Hope you all enjoy! Thank you!
- Tracy
----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts)
Please join our discord chat below for more help and discussions.
Filament Used: https://www.amazon.com/shop/cinderwing3d
------------------------------------------------------
APRIL 2024 Models: HERE
Whatchamahoozit 24' - EXCLUSIVE RELEASED
Baby Cherry Blossom Dragon - EXCLUSIVE RELEASED
Axolotl Dragons - RELEASED
Winged
Wingless
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (57)
I missed this one and never got the April email for myminifactory. Also, the discount code doesn’t work.
I missed this one. :(
i missed this guy... and i dont have an email to the my mini factory collection. ive been subscribed for a long time. would it be possible to have to email resent to me? thank you so much!
Same
wondering if we will see a baby version?
Maybe :3c
where can i download these files?
If you were not subscribed in April, you can grab them off Cults and MyMiniFactory. There is a discount code in the post! If you were subbed in April you should have gotten your MMF archive email If you were subbed in April and didnt get your MyMiniFactory archive email, message us at contactcinderwing3d@gmail.com or file a ticket in our discord.
is this sized as a baby or adult, i printed it at 100% and it's significantly shorter than my other adults
It's an adult dragon, axolotls are fat lil guys and the model reflects this
I bought this beautiful file, I was ready to print it but says that is not compatible with my Bambú labs P1S why?
Not sure why it would say that! It most certainly works on Bambu printers!
Is there a file with the eyes colored as well? Thank you
Yes the 3mf has colored eyes.
Jazzy, to Drea's point, was the dragon supposed to look like the top of all it's spines were cut off? It does look incomplete.
Yes the spines are not meant to be pointy, but flat, like an axolotl tail
i just threw this up on my plate and sliced it (with some tiny extras) and it takes only about 8 hours for a 1 color 100%! It would be nice to have them posed in a position to do 2 per plate. like a u shape or something. printing now, i'll tell you how she works out <3
I got this to print but I don’t like how it just looks like the print stops. It made me feel like it just failed on the body where the scales just leveled outside.
Since it's an axolotl dragon it's emulating the paddle tail of a axolotl which tend to be a tall fin thing, and that's what this is trying to match! Axolotls are weird haha
I have had no issues make sure to turn the aux fan off parts fan at 50 and chamber fan at 50 if you are using a bambu p1s/x1c
this is the only dragon i cant get to print it keeps busting loose on the build plate in that section of tail . failed twice over halfway through both prints on full size .
I'd recommend a brim, clean plate, and slowing down a bit!
Hi. I’ve now printed 4 of these at 60% and I keep having an issue with the 6th to the 7th spines from the tail end . They seem to be much closer than the others and get attached to each other.
I'll look into it!
bambu is only loading mesh, no color
Make sure you are using the import as geometry option! to not open as a 3mf
My daughter is currently obssessing of axolotls and one of her friend had a dragon and so then she wanted a dragon too and this just combines the two?! I love it shes gonna be going crazy when I print this for her birthday on the 17th💙
anyone else notice the tops of the body spines are missing?
they arent missing, they are like that on purpose so they dont create a sharp edge
Would it be possible to have the bodies positioned in a way that will allow 2 to fit on a Bambu X1 plate? Maybe more L shaped or even more space between the head and tail so they could go together barrel-of-monkeys style?
This is super cute, and we couldn't resist making it in eSUN Matte Rainbow PLA filament, since axolotl are commonly leucistic (white).
Do you have the Wings as a separate STL?
Most slicers have the ability to split to objects! You can do that to print only the wings if needed
I can't wait to print this. I printed the crystal tadlings which were the first dragons I ever printed and I lub them
Ohh my.. please don’t simply release a baby version only. You can’t leave us hangin waiting for your “ Axotl “ model now 🤪 *you totally could and I’d still love you
The adult is attached as a file already :)
Oh just imagine the baby version :-D
I just recieved a new rainbow filament and was wondering what to print. I now know.
Sweet!!!! I can’t wait to Make one!
This will definitely be making it on the printer once I get back from the Bigfoot Convention I will be at this weekend.
I'm jealous.
My son is so excited to see this and we are going to print in the morning, I already have something printing tonight so told him in morning he can print this.
@Jazzy, the ⭐️& 🎨 symbols used on the list in discord, is there a key as to what the symbols mean? I have a guess but I don’t want to assume cuz you know what that means… I’d prefer to KNOW. 😉 Thanks for all the extra effort you put in so us Cinders are organized! I appreciate you!
star is bonus, art is multicolor, i'll update the discord
I love it! 😍
Teen girl at NSYNC concert squeal!!!!
i have a reptile expo next weekend, this should be a hit.
I NEED to know what the filament is on the pink blue and purple one!
they are in the post/on teh amazon page!
perfect timing, one printer just finished and ready for this
YUUUUUS
Omg so cool
On my market I sell mostly dragons and axolotls... This changes EVERYTHING
FINALLY!!!! Thank you!!!!
So cool!! Can’t wait to print it!
Now I really have to get my arms fixed.
Omg!!! Adorable!!!