đ October Final Release: Wolvie & Sabertooth Second Diorama, Dracula and Jason Busts!
Hola hola my duuuuuuuuuuuuuuuuuuuuudes!!!
Here come the Wicked amigos to blast yo Sunday! Like finding forgotten money, like a rainbow in the clean blue sky!!! Pasele and check cuz today we have LOTS of fantastic stuff!!!
We know has been a while, and we missed you! Thatâs why we have some fine models for you today! And its not like one or two, itâs a lot!!! Letâs start the list!
We know that you loved the Wolverine vs Sabretooth dio, and man, the ones we have seen printed are out of this world! Thatâs why we come with something even better! And whatâs better than one diorama? TWO FRIKIN WOLVIES DIORAMAS YAY!!! Here comes the Wolverine and Sabretooth bust / sculptures diorama, based on the Wolverine 26 & 27 tomes of the Comic books!
And last but not least, we have the Dracula and Jason Voorhees Bust versions! Two exquisite horror pieces that no fan can leave behind in their collections!
Dudes, there is no enough resin / Filament for them all!!!! The juiciest term so far in Wicked!!!! 17 models full of flavor, magic and the Wicked touch you love so much!!! October is a term to remember forever!!!!
THE FEATURES:
Oh you didnât expect so many models still, huh? Well, thatâs the Wicked magic at work, my dudes! Letâs check what we have today in the options section!
Wolverine & Sabretooth Second Diorama: There is FOUR different configurations for this one: You can print the busts separates, the busts together with the diorama base, the Sculptures separated, and the Sculpture diorama too!!! Pick your favorite and print away!!!
Wolverine Sculpture/Bust: Three different portraits and two sets of claws!
Sabretooth Sculpture/Bust: Two different portraits for our furry and brutal amigo!!!
Dracula Bust: This one is one of our absolute favorites ever!!! Dracula is embracing his new love, and Mina is falling into the sweet and precious darkness of the forbidden love! One to have in the living room, amigos!
Jason Bust: Oh, youâre gonna love this one! The unstoppable Jason can be stabbed, cut, drown, even set on fire, and still he will go after you! We have the collection of the machetes in his back! Also, if you print big enough, it can work like a fancy and horrific knife holder for the kitchen!!! Also, he comes with 3 different masks to choose from, amigos!
WHATâS NEXT:
Oh man, the biggest term so far in Wicked is completely released! 17 models full of the Wicked groove are completely released! Wish you lots of fun with it, and we will be waiting to see your work in the groups! And keep the machines ready, cuz the Wicked train doesnât stop, baby! We have almost ready the November term, which features a couple of upgrades in the way that Wicked works, but thatâs a story for the next live!!!
For now, muchas gracias for all the love, amigos! Its amazing how magical and alive Wicked feels with every one of you around <3 Itâs the best feeling to have such lovely and kind community helping us to produce the art we love so much, and it makes us dream with a brighter future for us all! You make our days fun, and we feel that we are bringing happiness to the world with our art. Your art, cuz there is no Wicked without our amigos!!!
So, lets fire up these printers, and have lots and lots of fun with the models, my dudes! Mucho mucho love for you and be free, be happy, be Wicked!!!
Cha cha, my dudes!!
Comments (70)
I'm late to the party :( Is the Jason Voorhees still available any way or anywhere?
Hey , my dude!! Whats uuuuuuuuuuuup! At Wicked it's never too late! Write us on Patreon inbox and we will help you get the model in a special way! <3
is there an issue with the sabertooth heads? I downloaded the pre supported files and the supports are the only thing i see but no heads them selves. No issues with the rest of the model
Hey Amigo, my dude!! Whats uuuuuuuuuuuup! We have not had any failures with the model and everything went well... What we recommend is that for that piece please use your own supports, maybe there is some configuration that is affecting the result! Please let us know if you managed to print it or if you need any extra help.
Perhaps I am not explaining it correctly. Both heads have the same mask. The long-haired version shows no eyebrows. Every version I can find on the net has brows. I think maybe this is an oversight.
Thank you very much for letting us know my dear Vincent! We will talk to the team and take a look at this! If we make any updates we will let you know! Thanks again for the feedback!
Where are Sabretooth's Eyebrows on the long-haired sculpt?
Hey dude! This version doesn't have it because he wears a mask that covers them!
These and all the rest of the X-Men are freaking awesome! Where have you been all my life?! How did I miss all this?! When does Kitty Pryde/Shadowcat drop?! Awesome work guys!
Muchas Gracis my dear David! We love having you here! Enjoy the new models and we promise we'll have them all! It's just a matter of time! Also remember that you can see the past models here! If you want to buy one write us on Patreon Inbox and we'll help you! https://gumroad.com/3dwicked Muchas gracias for your support and love, and lots of good vibes your way, amigo! Happy printing and be happy, be free, be Wicked!
How do I buy the files?
Hey, my dude! What's uuuuuuuuuuuup! Welcome to Wicked and thank you very much for the support, here in the post we have pinned in the Patreon you can see all the download links: https://www.patreon.com/posts/76734795 (Welcome Pack + Promo Term + Term of the month) Tell us if you were able to download it or if you need extra help. Happy printing and be happy, be free, be Wicked!
Hi guys, can you please check the file "Base_3" at Diorama Bust Wolverine & SabreTooth both in Chitubox_presupported - 50% and in STL_Presupported -50%. The size does not seem to be correct here, it looks more like 100%.
Hey Joa my dude! Muchas Gracias for letting us know! We'll take a look at this and update you as soon as possible! <3
Any possibility of getting a comic book accurate cable soon? And maybe we can get a forge too? Or a spiderman sinister six? Just some ideas!
Ian my dude! Muchas Gracias for the recommendations! We love them all! We will keep them in mind for the future! You'll see! :)
Orders a dump truck full of resin!!!! LOL!!! Wow what a month!!!!!!!!!!!!!
YAY! We love to read that! Go all in! We love to see you happy! <3 Keep it up and share some pics with us when you have it finished.
These are killer! If you guys take requests into consideration, I'd LOVE to have a set of sculptures from the Age of Apocalypse series of comics.
Dead my amigo! Muchas Gracias for the recommendation! We love it too! We will keep it in mind for the future! <3
When you you guys releasing the Pre-supported files for the Wolverine Sculpture?
Hello my dude! What's uuuuuuuuuuuuuuuup! The pre-supported ones will be available in a couple of days! We believe that on November 10th they will all be ready! We'll let you know via Patreon Inbox when we've uploaded them! <3
You guys did amazing - as usual!! But muchachos.. why we still didn't get any Guardians of the Galaxy love since the first set (and the Milano, of course). No vol 3 love? Por que??
Hey Rafael! Muchas Gracias! And as for your recommendation we would love to have some new versions! We promise we will have them soon! It's just a matter of time!
Is it me or are the scale for these way off? Dracula bust loads in more around half scale. Wolvie vs sabertooth more around quarter and so on.
Hey man, whats up, how are you doing! The Dracula Bust is 30 cm tall with the base. And about the Wolverine vs Sabretooth Diorama, the Busts / Busts Diorama are 1/4 scale, and the Sculptures / Sculptures Diorama are 1/6 Scale! We just checked and everything seems to be in order. In any case, if you need any extra assistance, send us the photos of the issues you're having to our fanpage: https://www.facebook.com/3dWicked And we will try our best to help you, my dear amigo!!! Happy printing and be Wicked!!!!!
Awesome, excited to see whatâs next!
Hey Jeekyl, Whatâs uuuuuuuuuuuuuuuup my amigo!!! Thanks a lot for all your love and support!!! You are the Wicked one, amigo! <3 And fasten your seat belts!
I've been asking for wolvie and sabertooth for months and now I get what I want and then some. Much love guys!
Steve, my dear amiga!!! Happy you love it! And it will look better with your magic on it, my friend! <3
Hello... I would love to make the Dracula bust, I am however still fairly new at 3d Printing. Could you please tell me if I need support to print it? What type of supports and where should I place them... your creations are absolutely wickedâ€ïžâ€ïžâ€ïž
If itâs FDM you can use tree supports. If itâs resin printing then Wicked provides pre-supported files.
Mighty impressive month of releases.
You deserve this and more! Muchas gracias for your love, my dude!
what a crazy month đ€©, thank you for all these 3D models, my printer doesn't stop anymoređ, I can't wait to see what November has in store for us, good luck đ
Yeah baby! Fresh from the Wicked Lab into your hands! We are so happy to see that you liked them! <3
I love this lol
Whatâs uuuuuuuuuuuuuuuup, my dear Derek!!! Beautiful words, my friend! Happy you like it that much, amigo!
They all are awesome but that Drac concept love it
A very WICKED piece! Just the way we like it! <3
That Dracula is freaking beautiful
Muchas Gracias my dear Rafel! We strive every month because you are the best community in the world and you deserve the best! <3
Stop it! One amazing wolverine diorama was awesome but 2! Where am I going to put this one now? You guys are just too much! I don't know which one I love more......
That makes us really happy, we created it with all our love for you, my dear dude!
FANGS guys these are awesome
Hey Rob, Whatâs uuuuuuuuuuuuuuuup my friend!!! Happy you like it, and prepare yourself! More to come this month, my dear amigo!
This is great, the other side of brotherly love. Sometimes ya want to kiss them, and sometimes ya wanna kill them.
Muchas Gracias my dear Boston! You deserve the best! We love having you here! <3
Honestly I love Wolverine and Sabretooth and you magnified them the details are phenomenal for the 2 dioramas you do crazy stuff thank you guys and congratulations for your work.
Muchas Gracia smy dear Pti! We wanted this month to be special and thanks to your help we made it happen! Much love to you and we love having you here! <3
simplemente perfectos no se como lo logrĂĄis pero cada vez os superĂĄis mas...... de verdad enhorabuena
MuchĂsimas gracias por tu apoyo y cariño con nuestro trabajo, y esperamos que estĂ©s disfrutando de los modelos <3 Nos encanta tenerte a bordo de este sueño loco que llamamos Wicked! Happy printing and be Wicked, my dude!
Gotta agree with the others that Dracula bust is perfect
Hola Lee!!!! We love it a lot! And we can just imagine what our talented amigos will do with these!!! Hope to see lots of photos of your work and muchas gracias for all the luv, my dude!!!
I can't believe the talent you guys have, so detailed, dynamic and true to form. Thanks guys, incredible value!
Muchas gracias, my dear John! Muchas gracias for the kind words, my dude! We still have a long way to go, and it will get better and better! You will see!!!
That Dracula bust is PERFECTION!
Hola Chad, my duuuuuuuuuuuuuuuuuude!!! Yeah, we love it too!!! And easy to print, to put together! Hope to see your magic on it, and muchas gracias for the luv!!!
Siguen siendo perfectos đ«¶đ»
Hola Slem! Muchas gracias por el cariño, mi querido amigo~! Que bueno que te guste, y esperamos que los disfrutes mucho! Tu apoyo hace posible el Wicked dream, y te aseguramos que tan solo estamos empezando! Lo mejor esta por venir!!!
Ohhh yeahhh
Thats the spirit! ignite these printers, cuz you have lots to do, my dear Takesoon! Don't forget the photos of your work for your favorite dudes!!!
Wicked, you canât keep getting away with all these crimes of amazing models! đ€ my printer is going to hate me đ
My dude, its the least you deserve! We make it with all our hearts for you, and we love to see you enjoy the terms!!! Have lots of fun and share your work with us when you have a chance, my dear amigo!!!
I really like the Dracula bust. Nice classic style. Well done!
Hola Henryyyyyyyyyy! Happy to see you here, my dear amigo! Yes, we loved that one too!!!!! Its something awesome to put in the dinner table, or the entrance, even in the living room! Hope to see your print and your gorgeous colors on this one, my dude!
Oh my gosh. You guys have absolutely crushed it with all the wolverine/sabretooth models! Sooooo freakin amazing!
Hola Jeremy!!! Happy to read that, my dude! We knew that it was a favorite for our dudes, so we went all out! Wish you lots of fun and happy printing, amigo!!!
đ„đ„đ„
Muchas gracias for the luv, my dear Pham! Love to have you here and enjoooooooooooooooy!!!