🔥March Term: First Release is Ready!
Oh Yes, THIS IS WHAT YOU HAVE BEEN WAITING FOR!!!!
Here we come, amigos!!! Put the diapers on cuz your printer blasters are here, and we have the flavor to wake up your spirits, even in a slow monday: Lots of models to print on, with the extra Wicked sugar y’all love!!
Open your eyes and watch closely, cuz here is a Wicked original just for you!!!! Behold: A match made in hell!!!! An unstoppable Titan set on annihilation, and a mistress that feeds on the suffering and desperation of the soon to be dead!!! A mad couple ready to go until the end to make the entire universe scream!!!! Give it up for the Thanos and Death diorama!!!
And the cherry on top, the vicious commander in the Thanos armies, the ferocious spearman who will ravage lands and entire worlds for his “Father”!!! The Corvus Glaive is here!!!
Links waiting for you in the patreon inbox!
Please let us know how your downloads goes, amigos!!!
FEATURES:
Aaaaaaaaaaaaaaaand lets take a look to the features:
1. Death Sculpture: Two heads to choose from (Skull and human!!!)
2. The diorama has a special base to put both characters together, so please go to the diorama gumroad link where you will find all the pieces to print your complete model! In case you would like to print the characters separated (without diorama base) please go to the individual gumroad links, these have a special base for each character!!! Still, we strongly recommend to go full Wicked in these!!!
NEXT DROP:
Remember that there are lots of Wicked models to print this month!!! We have 10 models still incoming: Cyclops Sculpture, the Black Order Diorama base, and the Thanos, Death, Corvus and Cyclops busts!! And do not forget about the Movies term, cuz this month is dropping harder that your favorite song’s bass!!! In the next few days we will have news for you, but don’t worry, will not be long before you hear from us!
As always, Wicked is possible because each of you like our art and give us your support month after month, amigos!!! Muchas gracias for your love, for your time, for your vibes, for your comments, for all the Wicked energy that you share with us every day!!! Remember that Wicked is an everlasting dream, is a constant love letter to the art and 3d printing!!! It’s the passion for the comics, videogames and movies, and everything that its geek in this world <3!!! So million gracias for being here in this crusade, enduring the long journey that get us together to this point! We love what we have, but we are going for everything, for a place between the legends, and there is a spot for all of us there!!! So, get ready, cuz Wicked will only get better from here, amigos!!!
So shine on, baby, and enjooooooooooooooooooy!!! Unwrap these models and print them up real nice ❤️ Paint them with all your love and we will be waiting to see the photos, amigos!
Happy printing and be forever Wicked!!!
High five and sadness out, my dudes!!!!
Comments (82)
Hi was wondering if there was a way to get from March 2023 the Thanos
Hey my dude!! Whats uuuuuuuuuuuup! Check your Patreon Inbox! A surprise will be waiting for you there! <3
I Just became a member, how do I go about getting this Thanos STL
Hey mi amigo! What's uuuuuuuuuuuup! Welcome to WIKCED and thank you for your support! <3 Write us through Patreon Inbox and we will help you get it in a special way! <3
I just joined this Monday but would LOVE access to this Thanos, is it something I would need to purchase through the store now? If so.....is there a discount for patreon members? Sorry if it's a silly question
Hey dude! Welcome to Wicked and thank you for your support! Please write us a message via Patreon Inbox and we will help you with that! <3
Did fully diorama base. I for the life of me cannot get Thanos feet in the full diorama base. Am I missing something. Anyone else run into this? Wanted to see other opinion before I have to really sand and fix with milliput.
Hey Jeremy, my dude!! What's uuuuuuuuuuuup! We have had no reports with this. Please share some photos with us at: 3dwicked@gmail.com so we can take a look!
I see the same problem, one inner piece building from nowhere inside .. pre-supported and not supported .. it's the same . R.hand
Okey dude! We will check it and fix it as soon as possible! <3
Are the gauntlets ok inside ? I can see some pieces floating inside if I hollow them ..
Hey Claudio! What's uuuuuuuuuuuup, my dude!! This has already been fixed! Please re-download the files and you will have no more problems with your print
Strangely, I printed one of the originals with my hollowed and supported parts and everything printed great. I think it may have been due to temperature. It was a little cooler the days I had issues. Anyway, Got it all printed out and I'm assembling it for paint. Great work!
Chris mi amigo! We love to hear that everything went well! <3 Keep it up and share with us some pictures when it's done!
I'm printing after hollowing to 2mm wall thickness. I guess I didn't explain well enough. This is with the 50% models first of all. The model looks flawless and awesome until it has dried for a while after washing. It is still flexible but it splits into many pieces as it dries before I cure it. Pieces just fall off, not at layer lines, just like jigsaw pieces. After I cure the split parts, they don't split anymore. When I printed using 2.3 exposure, some supports did not remain attached. I think it may be the water washable resin not liking the thin walls as I've done a Captain America model using the exact same settings and resin but hollowed with 2mm walls. I'll let you know what I find in case someone else runs into this. I'll probably try non water washable resin as well for another test.
Hey dude! Let us know how it goes! We haven't had any problems with the model and have already seen many Patreons with successful prints! We look forward to hearing from you and if you need anything from us let us know! <3
I have printed the pre-supported Thanos statue with my Saturn 2 and Sirya Tech simple grey and black and with both after cleaning before curing, all the hollowed models basically exploded. They all ripped apart as if stretched. I'm using 2.5 exposure which is more than enough for other prints. Maybe the walls are too thin after hollowing? The prints still had some water on them so not completely dry yet. I may try to print manually hollowing with 2mm thickness. Could the the water soluble resin too. Thoughts?
Hey Chris, my dude!! What's uuuuuuuuuuuup! Most Times the problem is that your exposure is too high and keys grow due overexposure (+ lack of resting time) plus having Supports pulling on connecting Sides add to the Problem of a bad fit. You can try to fix it by taking some material off the model with a Dremel tool or reprint this piece with another orientation/exposure/rest time.
Loving the sculpts! Been a patreon just for a for the last month and am gearing up for this print. The 50mm pre-supported Thanos has structural errors in each piece requiring a fix using 3D Builder. Not sure if these will cause printing issues, but wanted to check before I press on.
¡Que pasa Eren! my duuuuuuuuuuuuude <3! We will take a look at the model and see if something needs to be fixed, although in our test print everything went well, you should not have any problems. Please let us know how you are doing and if you need any extra help let us know.
Got a question on scale. This says 1/6th ish and 400 something mm. I printed Galactus and that said 1/6th and was 700 something mm. Do I need to scale this 40 ish percent to match Galactus? Sorry if dumb question new to this and my OCD probably going to kick in if I got a bunch of marvel statues difference sizes/scale.
Hey Jeremy, What's uuuuuuuuuuuuuuuuup, my friend! How is it going! Don't worry, we are here to help you. You would have to scale Thanos to 160%! That way you'll get the same scale as Galactus at 100%! We hope you understand us and if you need anything from us let us know!
How long does it take to get access? I'd like to get on these awesome prints. That Lady Death is insane.
Hey Zero, What's uuuuuuuuuuuuuuuuup, my friend! How is it going! Please check your Patreon inbox! There we have sent you the models for the first release of the month! <3
quiero esa muerteeeeeee uuuffff
Hey, my dude!! What's uuuuuuuuuuuup!!! Estos modelos ya lo entregamos! porfavor escríbenos por Patreon Inbox y allí te lo enviaremos!
Starting this immediately. Thank you
Cool my dear Shaun! Share with us some pictures when you have it ready! <3
this is just incredible. I had a few prints in mind that I was planning on printing (the printer is now free) and immediately loaded up these files. Can't wait to show how it turns out soon!
xDDD We love to hear that my dear Cory! Seeing you so motivated with the new models makes us so happy! <3 Please share with us some pictures when you have it ready!
OMG!!! this is superb!!! Can't wait!
Hey Simone! What’s uuuuuup my friend? How is your week going! These models are already delivered! If you still don't have them in your Patreon Inbox please send us a message and we will send them to you! <3
I have so many models on my list to print and now you drop these masterpieces! Lady Death and Thanos just might be my next ones after I get around to printing Gambit and Rogue!
We love to see your surprise, my dear Chad!!!!! A pleasure to see you love the models! And don't forget to send us some pictures when you have it ready! We'd love to see your art, amigo!! <3
OMG Love the Lady Death!!! Very Wicked hehe
Glad to see you love the model, my dear Jay! Thanos and Lady Death are very, very Wicked!!!! Love to have you here, my dear amigo!
I'm always been all in on your mcu stuff as I prefer the actors likeness loved the comic stuff as well its just my style of painting is to go for realism and stuff lol I say that it's been almost 8 months since I've painted anything don't know why I've dropped off tbh it sucks........ But to the actual point I can't tell which thanos looks better this one is so awesome I print the busts normally so can't wait for your first look and renders of them also wondering what your movie term is this month hoping for a Crow with amazing likeness at some point eventually might just be the thing to fire up the painting again lol sorry that was a bit to long winded haha
Whats uuuuuuuuuuuuuuuup Lee!!! Thank you very much for your kind words! We love to see you enjoying the models! We hope you'll be back in action, we love to see your art!
every one of these is incredible. I'm warming up the printers now! Thanks Wicked!
YAY! We love to see you so happy, my dear Robert! put your printers on full steam because with all the surprises we have prepared you're going to need it xD!
New member here with a question. Where is my "Patreon Inbox" Wicked keeps referring to? Thanks for the assist.
Silver, What's uuuuuuuuuuuuuuuup, my dude! How is your day going! Your inbox is located in the top right of the screen, my dear amigo! You will see two chat boxes overlapping. After clicking on them, you will be taken to the Messages inbox! There should be your messages, and of course, your sweet and lovely models waiting for ya! Let us know if you find it and if we can be of any help! We are here for you <3 We love to have you here and muchas gracias for your love and support, my dear amigo! Feliz semana and happy printing!
OMG guys aaaaawwwwsssssooooommmeeeeeee ❤️❤️❤️
Whats uuuuuuuuuuuuuuuup dude!!! March will be an amazing month and we still have some surprises up our sleeves <3 you'll see!!!!
I LOVE that we get a comic accurate Thanos but I just wish he wasn't doing the snap action like the MCU Thanos we recently got. There is a great statue out there that has the comic accurate Thanos sitting on his throne with this huge grin on his face. It would have been nice to get something different than the last Thanos statue.
Whats uuuuuuuuuuuuuuuup Charles!!! We have seen the reference of this pose, but we went for the one in dio with lady Death! Also, remember that the busts are a second option for the sculptures, so wait to see what we have in stock, maybe you like that one more, my dude!!!! <3
That Thanos Dio with death is such a eye candy.very well done Guys 👍😉
What’s uuuuuuuuuuuuuuuup Bastian!!! Yes! In Wicked we couldn't settle for just one version of Thanos, and bringing the lady of death with him was the icing on the cake! Glad to see you liked it mi amigo <3
Dude this is gorgeous and yoyr gaintlet is amazing!!!
A wicked touch, my dear Patrick! <3 We love that you love all the details this one has! It is the greatest reward for us, my dear amigo!!!!
Oh my dudes I saw what the movie term is and let me just say…. I’ve been hoping for some wicked justice! Ty x 3000 and more! Not saying a word! Lol
Que pasa, my dear Aaron!!! Oh you bet, my dude! Just wait to see what your favorite amigos are getting to your printers this month!!!
i like this classic version more, since ive had the comics from this run..
Hey Robert!! <3 We also love this version of Thanos too! And we are just starting the party!!! Happy you enjoy it, my dear amigo!
You guys are, how my father would put it, in broken English " Too Fuckin Good." Bar non, hands down, the best patreon.
xDDDD Send our regards to your father, my dear Zedda! We love that you love it!!!! Thank you so much for making our community the best ever!!! <3
Love Thanos and Death, Thank you so much for the human face for Death. Absolutely perfect! Definitely printing that diorama!
Oh yeah baby! From Wicked with love, my dude!!!!! We knew it was something the community wanted, and we couldn't pass it up! It’s great to see you liked it! <3
wow these are amazing. great work. Fingers crossed the movie is Original TMNT
Whats uuuuuuuuuuuuuuuup Andrew!!! Thank you very much for your kind words! And as for the ninja turtles we would love to bring a diorama with all of them! Maybe dividing them by months we could do it, when we have news about this, we will let you know mi amigo!
Incredible work!! Just wow!
Renown amigo mio! You know that here at Wicked we always try to give you the best we can!!! <3 glad you liked it and hope to see them on your shelf soon!
This is incredible looking. Thank you
You deserve this and more my dear dude! Muchas gracias for your love, amigo! Its awesome to see you like it! <3
Holy shit this is so awesome!!!!!!!!!!!!!!
And it's just the beginning of the month my dear Tony! <3 big surprises are coming! Get the diapers ready!!!!
Absolutely jaw dropping.
We love to see your surprise, my dear Boot!!!!! A pleasure to see you love the models! And don't forget to send us some pictures when you have it ready! We'd love to see your art, amigo!! <3
Nice...very, very nice
My dear Stuart! We love to read those words coming from you!!! muchas gracias for the love and support, amigo! <3
Damn lady Death is curvy as hell! ( get it! as hell! :P )
xDDDD! Now we understand Thanos why he fell in love with her! We would have been tempted too! 🔥
You my friends are straight up kings!!!! 🤘🏻🤘🏻🤘🏻🤘🏻🔥🔥🔥🔥
And you are the best community we can ask for, my dear Pep! Together we are legends, amigo!!!! Enjoy and happy printing!!!
I love this! Thank you for the classic Thanos!!!
Yes! This one comes with all the Wicked details we love!!!! <3 you just need to worry about getting your printers ready!!!! We do the rest my dear amigo!
Hell yeah!
Whats uuuuuuuuuuuuuuuup, my dear Chris!!! Dude! Muchas gracias for those nice words!!!!! it's a pleasure for us to bring you happiness, my dear amigo! <3
This is amazing!
Matt <3 What's uuuuuuuuuuuuuuuuup!!! Muchas gracias for the support and great energy, my dear dude! Happy you like the stuff!
NOICE!
Glad to see you love the model, my dear Anthony! Thanos and Lady Death are very, very Wicked!!!! Love to have you here, my dear amigo!