BritBundle
Here is BritBundle with fully renewed design, AAX and Apple Silicon support!
- BritChannel -
Classic British Equalizer & Preamp with Mic/Line option
Features
HIGH: Fixed 10kHz with +/-15dB
MID: OFF, .36, .7, 1.6, 3.2, 4.8, 7.2kHz with +/-15dB
LOW: OFF, 35, 60, 110, 220Hz with +/-15dB
HPF: OFF, 50, 80, 160, 300Hz
GAIN: Preamp gain +/-24dB
TRIM: Output control +/-24dB
MIC: Mic Preamp switch. Default position is Line amp
ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling
- Britpressor -
Classic British Compressor/Limiter
Features
THRESHOLD (WHITE): Limiter section threshold - 15 to 4dB
RECOVERY (WHITE): Limiter section recovery (release) - 50ms, 100ms, 200ms, 800ms, Auto1, Auto2
THRESHOLD (ORANGE): Compressor section threshold
RECOVERY (ORANGE): Compressor section recovery (release) - 100ms, 400ms, 800ms, 1500ms, Auto1, Auto2
RATIO: Compressor section ratio - 1.5, 2, 3, 4, 6
GAIN: Final output stage of plugin
MIX: Blending DRY and WET signal
HIGH: -6 to +6dB High Gain to feed sidechain circuit for more or less high frequency compression
MID: -6 to +6dB Mid Gain to feed sidechain circuit for more or less mid frequency compression
LOW: -6 to +6dB Low Gain to feed sidechain circuit for more or less low frequency compression
EXT: External Sidechain option
ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling
- BritPre -
Classic British Mic/Line Preamp with Lowpass and Highpass filters. It has two modules with independent bypass. Also, it has phase invert button.
Features
GAIN: Preamp gain -20 to 40dB with 5dB steps
OUTPUT: Final output control of plugins. If you bypass preamp section, you can still use output control with filter section
HPF: OFF, 45, 70, 160, 360Hz
LPF: OFF, 8, 6, 4, 2kHz
MIC: Mic Preamp switch. Default position is Line amp
PHASE: Phase invert button
ANALOG OBSESSION: This label is clickable. It will turn to red and engage Oversampling
- Resizable interface. Simple "Bottom Right Corner Handle" to resize. 50% to 200%.
*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;
1. Open plug-in for the first time
2. Resize GUI according to your screen resolution or you liking before setting any knobs
3. Save this state as default preset with your DAW
Now, you will be able to load new instances with same size.
(If you want to go default size, simply double click to resize handle.)
AVAILABLE FORMATS
VST3 / AU / AAX Native - Audiosuite | Mac 10.11 or Higher | Intel / Apple Silicon
VST3 / AAX Native - Audiosuite | Windows 10 - 11
Mac Versions require a graphic card that supports “Metal”
Windows Versions require a graphic card that supports “OpenGL”
DOWNLOADS
BritChannel
Britpressor
BritPre
Comments (8)
FGantastic work!!! One thing though, after installation the Britpressor doesn't show up in ableton Live 12... Any idea why? Thanks!!!
oh its the 84 not the 73 I was gonna ask about the trim config. k weil see it doth goith
is the gain stage/saturation the same on the brit pre and brit channel? any reason to use both on the same track?
my daw crashes when trying to install
in my windows i don t see the indicator vu meter britpressor
is there a way to disengage the pre amp on the brit channel?
do these work in ableton 9?
Can you please add a channel linking and unlinking function to your compressors? It would make all the difference in the world when you use your compressors on stereo channels. Without this functionality on your compressors, you get too much ducking and too much of a narrowed sound on stereo channels. Please add Channel linking and unlinking function.