clutchkickdori

What's up everyone! Bringing you another drift config, and today it's the Gavril Grand Marshal! It's definitely one of, if not the best chassis for drifting in BeamNG. Built for long and tight corners. It's got enough power and angle to keep you drifting for days, and the most important part, it loo

Hey everyone, First of all I wanna say thank you for all the support I received for the builds and settings. As you know, I made the server accessible for Tier 2 and Tier 3 Patrons. I want to give back as much as I possibly can, so I’ll make the server accessible for all paid tiers. Stay tuned for T

The Ibishu BX Pro Drift config is notoriously difficult to drive and drift, so I fixed it! The car still requires a certain skill level, but compared to the original config, it feels much more intuitive to drift in. What has been done to the car? I shortened the final drive, changed the wheel size a

BeamNG 0.40 dropped a couple days ago, and what better way to celebrate the new update than with a drift config for the new truck they released? The build is ridiculous, 60psi of boost, 120psi tire pressure, 12.8L diesel engine, rolling coal and going sideways with all that. Use the 4th gear for dri

Hi everyone, The BeamMP server is back up and running nicely. Mods seems to work good - if you encounter a broken mod, please let me know so we can get it sorted! Thanks for the support!!!

BeamNG 0.40 is finally here and I know we’re all super excited for this update! I tested my configs and they’re all working fine (might be even better now?). The way to install these configs didn’t change so it’s still like in 0.39. Now to some exciting updates! I overhauled all the configs and put

I always liked lower powered cars, especially naturally aspirated with smaller wheels. So I decided to build one! This car is going to be perfect for beginners that are just learning how to drift in BeamNG. Some specs about the build: - Around 170HP - Angle Kit - Naturally Aspirated - 14 inch wheels

Hey everyone, Working on revisiting all the "No Gatekeeping" builds, making sure everything is good to go and I'll be combining them in a modpack that will be shared on the repository, and it will be available on my BeamMP server. Also, a new No Gatekeeping car will be dropping today!

Another ETK is joining the lineup! This time, we're taking the ETK K-Series and giving it the setup it deserves. A turbocharged inline-six setup with plenty of torque to get the rear end stepping out! Here are some notable things about this config: 3.0L Inline-6 engine Turbocharged 400 HP 500 Nm of

Head on over to any of my socials and comment what mod should I do to the BX! Let’s build this car together!

Another drift build is ready for you guys! This time, I've turned the ETK I-Series into a proper drift machine. 👀 We're working with: 3.0L Inline-6 Turbocharged 15-inch wheels Plenty of power Plenty of angle Built to get sideways and stay there 🔥 This one has a really fun balance of power, grip, a

Hi y’all, What are some things you would like to see in the future? I’ll definitely keep up the No Gatekeeping series, but I want to include you more! Drop me your ideas on what you would like to see more.

Introducing my latest build: a supercharged V6 drift machine, built to put down some serious angle while keeping things grippy and controllable. Here's what we're working with: 3.5L V6 engine — plenty of power and torque to throw it sideways. Supercharged — because more power is always fun! 19-inch

The account is back after doing all verifications. Thanks for sticking around!

What's up y'all! New drift config drop for today! I present you the Ibishu Miramar GTz drift build. I managed to make it as good as possible for various different roads. 1.9DOHC I4, shorter gears (use 3rd for drifting), ITBs, small wheels and everything in between. It's super lightweight and fun to

Hey all, For some reason, my Instagram and Facebook page got taken down. I'm trying to resolve this and doing all the verifications to get the pages back up again. In the meantime, I'll be uploading my content to TikTok and YouTube. Same username on both platforms. Thanks!

What's up y'all! Dropping another config for you guys. This time I decided to revisit the 200BX that started it all. Some noteable things are that instead of the Pro Drift suspension, we are using the regular independent suspension arms on both the front and rear. The car is designed for drifting in

This is an update to my previous Moza PitHouse and BeamNG settings. I spent some time checking different PitHouse versions and firmware versions to get the best feeling you can get from the game. These PitHouse settings can also be used for Assetto Corsa! Wheelbase Firmware: v1.2.8.18 PitHouse Versi

What's up y'all! If you guys are using the Thrustmaster T300RS or T500RS, here are some settings that should help you out with drifting in BeamNG! Please give them a try and let me know what you're thinking!

What's up everyone! Hope y'all are doing good! For another No Gatekeeping drift build I bring you the Soliad Wendover! I have no clue why, but this car shreds tires and is super controllable regardless if it's a tight course or super long stretches. 2nd gear is mainly used for drifting. It's got eno

Hey everyone, I decided to start a private BeamMP server for paid members ($3 and $5 Patrons). It's still in early phases and I need to set everything up. I want to include all my builds straight to the server for you guys to enjoy. Additionally, the above mentioned tiers get access to a private GC

You guys have asked for it, and it won the latest poll, so here it is! The Ibishu Pessima Mk1 drift config. I built this car a bit differently than my other cars. I put an LSD in it, adjusted the locking rates, and it’s on 15 inch wheels instead of the 17 or 18 inch I usually run. Even on lower tire

One of the best FREE mods on the BeamNG forums - AdamPLGames BMW E36. I asked you guys and you said you wanted an E36 drift config, so here it is. It's heavily inspired by low horsepower, beginner drift cars that everyone could build IRL. Angle kit, 250HP and 300N/m of torque keeps this car sideways

I really enjoyed building this one. Took me some time figure out how to make this car more responsive and self steer across different tarmac types. I decided to keep this one NA instead of strapping a supercharger on it due to better throttle responsiveness. It still packs enough power in 3rd gear t

When I asked you guys which car you wanted to see next, the ETK 800 won by a mile! So here it is, the 800 Sedan drift config. Some specifications of this build: 2.0l I4 Engine 317hp 419Nm Torque 6 speed MT RWD Welded diff 17x8 Wheels HOW TO INSTALL THE CAR: Download the files below and copy them ove

This is the car that started it all. Thank you all for the support over on Instagram when I first posted this build! Some specifications of the car: 2.5l Flat 4 295hp 390Nm Torque RWD 17x8 Wheels Drift Steering HOW TO INSTALL THE CAR: Download the files below and copy them over to your local appdata

A lot of you guys have asked me about my force feedback settings in BeamNG.Drive and Moza PitHouse. Well, here they are! I have included the .mzpreset files for you to load up directly into your PitHouse. Keep in mind that I am using the Moza R5 with the SRP Lite pedals. These presets are both for t