Mini Potion Clicker

The next model in the Halloween lineup is freshly brewed and ready to print! The mini potion makes a great desk buddy, keychain, or bag charm and is sure to get some attention at markets.

Model notes

• ❗️This model includes a pause during printing at layer 115 (with the default settings) for the insertion of the clicker. Good bed adhesion is very important so that the potion base doesn't dislodge during the insertion. Please wash your plate with soap and water, dry it, and use a glue stick if necessary. Feel free to add a brim to the potion base as well for extra adhesion.

• Original and keychain versions included, each in single-color and multicolor variations

• Default slicer settings: 0.16 mm layer height , 15% infill, 3 walls

• No supports

• Use Variable Layer Height to improve details if you have time.

• I used the Cherry MX-style keyboard switch found here: https://amzn.to/4e1o14C - Glue may be necessary to keep the switch and the body together.

• When using the STL folders, be sure to load all parts of the model at once as an object with multiple parts to ensure correct sizing ratio, then scale the model up to the desired size. I recommended referencing the preset scale size % in the 3mf file even if you don't use Bambu Studio as your normal slicer. Don't forget to add the pause with whatever slicer you use so that you can insert the clicker during printing.

• The seam is set to 'back'.

Filaments Used

• Charcoal Black PLA Matte - Bambu

• Ivory White PLA Matte - Bambu

• Sakura Pink PLA Matte - Bambu

• Purple PLA Matte - Ender

• Lavender PLA Translucent - Bambu

• Green PLA Glow - Bambu

• Crystal Green PLA Transparent - AMOLEN 3D

• Pink PLA Glow - Bambu

• Crystal Pink PLA Transparent - AMOLEN 3D

• Tan Birch PLA Wood - Elegoo (Cork)

There is still even MORE Halloween on its way—stay tuned!