mz4250

Hello friends! Today I worked on some fun requests! I made: Swordfish - a pretty cool request for another aquatic creature. I don't get these often so I think its neat. For FDM printing this is a little tricky but if you print it in its current orientation and use organic supports it should come out

Hello friends. Jen and I have arrived in Atlanta today for Dragoncon! There aren't too many events today so I did get some down time to model. I worked on some Patreon requests so I made: Loxodon Druid 2 - this was a fun request to work on! I enjoyed sculpting up the little armor details. I'm also a

Hello friends! Today I worked on some more requests and made: Aapoph Granitescale - I love working on Pathfinder creatures! This one is a snake folk similar to Yuan-ti but with rock hard scales. The work done here might be useful when I get to the Yuan-ti later this year. For FDM printing print this

Hello friends! I'm happy to report our wedding anniversary was lovely :D . But back to the arts I go and I made the following: Sword Spider - this is a creepy arachnid with sharpened blade like legs. Given how sharp the tips of its legs are it cannot be printed attached to the size marker. Therefore

Hello friends! Today I worked on more Patreon requests and made: Naga Druid - this was a neat request for a Naga Druid that has arms. I rather liked working on this friendly fellow. Seems like the kind of guy who just wants the party well fed, well so long as they're ok with vegetarian haha. For FDM

Hello friends! Today I worked on requests and made: Dragonborn Druid 3 - this was a nice mix of sculpting and modeling work. For FDM printing I recommend printing him on his back. Make sure you use organic tree supports and be careful removing supports from his head crest. For resin users the usual

Hello friends! Today I worked on the druids from the new Monster Manual! These were a nice mix of sculpting and rigging work. I had a lot of fun working on the female one as I wanted to make a more benevolent looking figure who loves her fur babies haha. For FDM printing you'll get your best results

Hello friends! Today I worked on more spooky requests and made: Shadow Assassin - this was a neat request because it gave me an opportunity to make the Shadow from the new Monster Manual! For FDM folks print this on its back for the best results. You might lose some of the wispy details but that's t

Hello friends. For those of you who don't know I'm a firm supporter of Ukraine's fight for freedom and its recovery from this horrible war. Today I'd like to showcase Superhumans, an amazing trauma center in Ukraine that specializes in 3D printing prosthetics to help victims of this war, be it adult

Hello friends! Normally on Thursdays and Fridays I work on requests, however, because I'm so close to finishing this book I decided to work today and tomorrow on it. I'm just five models away and its over! Then next week I'll do only requests to balance this out while you guys vote on my next big pr

Hello friends! I have errands to run today but I was able at least get some easy requests completed today. I'll try some harder ones tomorrow haha. I made: Army Drill Sergeant - this was a fun model to put together! Made me feel like I was 17 again lol. Full files are in Adventurers- Other PCs and N

Hello friends! Today I worked on Tome of Beasts and made: Subek - these crocodile folk are generally friendly humanoids, helping with local projects, selling wares and all in all being good riverfolk. But when the rainy season comes... well.. best stay out of their way. This was a great sculpting an

Hello friends! I took off today because its a holiday here in the U.S. However today I did do some personal work and completed my characters for my next campaign in which I actually get to be a player! I modeled two of these last week and three today then printed and painted them as well. Not too sh

Hello friends! Today I worked on Requests from the Request Board and made: Owlin Rogue - I'm really enjoying these owlin requests that are coming in. This fella wasn't too hard to pull off. However given the cute nature of Owlin's him being a mean ol stabby stabby feels a little wrong lol. Full file

Hello friends! Today I worked on more creatures from Tome of Beasts! I made: Hundun - holy moly this book is WEIRD lol. This funny guy is a celestial being that is drenched in the chaos of reality. It doesn't make any sense when it speaks but it'll back you up if you're clearly cool. For FDM printin

Hello friends! Today I worked on the remaining hags from Tome of Beasts! I made: Red Hag - these were the original hags, who unlike the crones we are used to, stay youthful for their immortal lives. They are more martial than their other arcane sisters but are just as powerful with magic. Give they

Hello friends! Today I worked on the last Giant in this amazing book the Thursir! This giant is basically a very large dwarf, with all the same hobbies and mannerisms. Given how dwarf like it is, I naturally made a commercial safe adventurer out of him called Dwarf Male Druid w Warhammer, located in

Hello friends! Today I worked on the next Fey Lady from Tome of Beasts, the Queen of Witches! Also known as the Mountain Ogress and Moonweaver, she is a massive woman who towers over the other archfey. She is a being of both martial prowess and raw magical power and can be a powerful patron to natur

Important Announcement: Japan next week! Hello friends! So next week I'll be in Japan with Jen! We'll be gone for three weeks however as I love modeling, and modeling in Japan will be a vibe, I'll still be making free minis for you all to enjoy! And they'll be themed around Japanese culture and folk

Hello friends! Today I tapped into the request board and made: Aasimar Female Druid 2 - this was a fun request as the patron wanted a very plant themed character with its wings being tree branches and having a halo of flowers. Not very FDM friendly unfortunately. Full files are in Adventurers - Drui

Hello friends! Today I worked on: Updated Gar Shatterkeel - this was a fun sculpting project! Its also neat to revisit this model from Princes of the Apocalypse that I worked on about seven years ago. I've certainly come a long way since then. Full files are in the POTA folder. Aasimar Female Druid

Hello friends! Its "My Day Friday" so I cut loose and just made whatever my creative spirit felt like. Today I made two adventurers from my current Tomb of Annihilation campaign that I DM. They are: Human Male Ranger 5 - Sassafras Sasperela is a Cajun style Ranger who loves cooking and hopes to one

Hello friends! It was a holiday here in the U.S. yesterday so I enjoyed an extra day off. I still did some modeling but kept it casual as I know taking time off is important for mental health. Today I continued where I left off and made: Aarakocra Circle of Wildfire Druid - sculpting fire is so rela

Hello friends! Today in Monsters of the Multiverse I worked on its two Tortles. The originals were a little dated so I had some fun with this project. After touching up my sculpted and rigged base Tortle I went to town making these two rather relaxed characters. I'm also happy I modeled and rigged u

Hello friends! Today was another fun day working on models from the Request Board! The models I made are: Griffon Folk Samurai - This was a rather satisfying mix of modeling, sculpting, and a little kit bashing. Full files are in Adventurers - Fighters - Other Fighters. Demon Toad - frogs and toads

Hello friends! The 31 Days of Spooky continues today with a piece from my friend Mia Kay over at M3DM as we collaborate in October! This spooky tree makes a good terrain scatter piece to add some creepy vibes to your next game. Full files are posted on Mia's latest post on her Patreon. Also I worked

Hello friends! So yesterday I made a bit of a thirst trap by making the male Archdruid. Its only fair I do the same for the female. However... I prefer all of my female models to still look like competent badasses so while yes the thirst faucet has been let loose... she could still destroy anyone wh

Hello friends! As I continue working on Monsters of the Multiverse I've run into the first NPC, the Archdruid. Like in the Monster Manual I've decided to make human versions of each NPC as its the most common NPC race folks run into. I'll make a male and female version for each as well. Today I have

Hello again friends! Thanks for tuning in to my live stream if you were able to! Today I made two requests: A Quezalcoatus both in a terrestrial pose as well as flying, along with a Tabaxi Female Druid that's all natural, long haired, and holding the Staff of the Woodlands :D The Quezalcoatlus was m

Hello friends! Usually on Fridays I work on requests, however Jen and I are going to a friends wedding that day so I might not get any work done. Therefore I decided to work on requests today and I'm really happy with what I made :) Chinese Dragon - I always always ALWAYS wanted to make one of these

Hello friends! Here's a collection of models from the Request Board I've been working on and off throughout my trip. Some were pretty easy and quick remix work while others were fresh. Naturally I got up pretty early today so I was able to wrap these up, but now its time for family fun :) Spider of

Hello friends! Today I completed: Halfling Female Druid on a Wolf - located in Adventurers - Druids - Halfling Druids in all drives. Gourdfolk Adventurer - located in Adventurers - Other PCs and NPCs. Beggar - located in Misc Patron Requests - Misc NPCs. Kitsune Samurai - located in Adventurers - Fi

Hello friends! Today I made some new Player Characters per patron requests! Gnome Artillerist Artificer - This was a fun modeling and remixing project I made happen. Full files are in Adventurers - Artificers- Gnome Artificers. Elf Male Druid 4 - This is a star circle druid though you could swap the

Hello friends! Today I completed a Patron request as well as updated one of the Monster Manual creatures: Homunculus - This model was a fun sculpting exercise but keep in mind it is very TINY. Not all the details might show up on your printer, but I did make sure it was FDM friendly. Full files are

Updated Lizardfolk! Hello friends! Today I completed another request that will pay off in the future. Its an updated Lizardfolk! What's the pay off on this model is I made it fully rigged! This way I could use it again if I wanted to pose him differently, insert different weapons etc. And if anyone

Hello friends! Today I completed two more requests: Firbolg Spore Circle Druid - This was an excellent sculpting exercise. Plus its nice to add more Firbolgs to the collection. Full files are in Adventurers - Druids. Aasimar Bard with a Pan Flute - full files located in Adventurers- Bards. Its the w

Hello friends! Today I made: Pocket Unicorn - this adorable and ridiculous creature is my new spirit animal haha. Full files are in U - Unicorns. Gnome Male Druid on Pocket Unicorn - this was the original request. Only made sense to have the unicorn by itself too. Full files are in Adventurers - Dru

Hello friends! Today I completed more requests, this time a mix of Request Board models and rewards for the winners of last month's painting contest! Goliath Rogue - located in Adventurers - Rogues. Warforged Gunslinger 3 - located in Adventurers - Gunslingers Sea Spawn Druid - located in Adventurer

Here are two more requests from the Request Board! I made: Noblewoman - the request was for a vampire spawn noblewoman, however, given no printer can pick up fangs or blood stains like in the artwork that was supplied to me, I opted for just a regular noble. The paint job in the end can make the blo

Hello again friends. Throughout the day there were small periods of quiet, so when family didn't need me I made some modeling happen. Here are some models from the Request Board I completed. Dragonborn Druid Leaning on his staff - located in Adventurers - Druids. Kitsune Female Druid - located in Ad

Today I made two more requests! First we have a Crab Folk per the request of a winner from last month's painting contest! Its located in the new Mordenkainen's Fiendish Folio Vol 1 folder that I set up today in the main drive. You can find the stl here too: https://www.shapeways.com/product/FY2PWYY2

Today I modeled more models from The Request Board! I made the mysterious "Old Man with the Canaries" and a Female Elf Druid of the Spore Circle! The Old Man is in the Dragon folder under Bahamut. The Spore Circle Druid is under the Adventurers - Druids folder in both drives. I also updated my origi