mz4250

Hello friends! Today I worked on more spooky minis from Ravenloft the Horror Within! Zombie Beholder Terror - this terrifying take on the Zombie Beholder combines the horrifying undead nature of the original with grafted on creature parts making each tentacle far more dangerous than a normal Beholde

Hello friends! Not only did I work on the winner of the Silly Mini poll, I decided to work on the top three! I made: Sir Honkington the Violent - here is the winner of the poll! He was a fun mix of modeling and rigging work. I'm happy I had the Goose already made from previous projects haha. For FDM

Hello friends! Today was a silly one. The Patreon requests I made include: Biblically Accurate Beholder - this was a silly request of a beholder that is disguised as a biblically accurate angel. It was a fun mix of sculpting and modeling work. I like the little eye stalks peaking through the wings h

Hello friends! Today I worked on some WILD spooky requests: Beholdataur - this was insane lol. Its a beholder who dreamed of being a four armed girallon, sphinx, displacer beast hybrid. It was a lot of work but I'm very happy with how it turned out. For FDM printing you will have an easier life prin

Hello friends! Today I have for you all the Death Tyrant! This undead Beholder was a fun sculpting and modeling project to take on. I was able to use the 2014 version as a starting point but unlike the older versions, this one has spectral eye stalks! You have two means of printing this. One version

Hello friends! Today I proudly present to you all the 2025 Beholder! This was a fun sculpting project! I really enjoyed rigging this fella up and giving it a rather maniacal looking face haha. This is probably one of the more iconic monsters from D&D so I'm very happy with how he turned out. For FDM

Hello friends! Today I had a lot of errands to run but I did get some 3D work done. I made: Harengon Male Monk - this was a fun model to make today! I liked posing this guy with a neat martial arts pose. Also it gave me a chance to make a nice Kung Fu Sash. Full files are here and in Adventurers - M

Hello friends! Today I proudly present to you the next Spelljammer Ship, the Tyrant! This is a ship Beholders use in space and it was by far one of the strangest ships I've ever modeled. It flies side ways like the image above but the maps have it aligned with the tentacles at the top. I made a full

Thanks again to everyone who took part in this months contest! They came out great! But now its your chance to vote! You can see the submissions here Prizes again are: 1st - a custom mini 3D modeled, printed and painted by me! 2nd & 3rd - a custom 3D modeled mini 4th & beyond - a sticker by Jen! Las

Hello friends! Today I cut loose and just made whatever I felt like so I worked on the next Spelljammer Ship, the Tyrant! This is a ship that Beholders use in space and its about as weird as it gets when it comes to these ships haha. If flies in the orientation of the ship above, but the inside is o

Thanks to everyone who voted for the silly model this month! The winner is the Beerholder, which I 3D modeled this morning. This was a rather silly model and I really enjoyed working on it. That smile really makes me wary of enjoying a drink with him but meh, he's probably trustworthy why not? I kno

Hello friends! I hope you had a great weekend! Today I completed the Warlocks of the Great Old Ones thus completing this chapter of the book. I've included all the other Warlocks here for the public's convenience as I share this around the internet. These characters are all safe for commercial use a

Today was a fun one! I made two requests from the folks that won last months 3D printing and painting contest! I made: Chonkholder - its a festively plump beholder! He might be bribed with snacks if you're a good enough chef haha. Full files are in Misc Patron Requests - B - Beholders other. Free fi

Hello friends! Today I'm happy to share with you all what I'd look like if I was a Beholder lol. One of my patrons made this for fun and sent it to me as Christmas present. I think this catches me pretty well, with my mug of coffee, laptop for modeling, me using a mouse still and painting a mini on

Hello friends! Today I proudly present another biblically accurate(ish) Angel model! Technically its supposed to be two wheels but I added more for the vibe lol. I modeled this so you can print it flat on a FDM print bed with no supports needed. The wheels are interlocked so as you print away and th

Hello friends! Today Mia over at M3DM has a free Potion Table terrain piece ready for you all! Tomorrow is my turn for this spooky collaboration so expect something truly frightening :P Also today I have two more models from Monsters of the Multiverse! I have the little Gazer mini and Geryon the arc

Hello friends! Today the collaborative month with Mia Kay at M3DM continues with my submission of this Spooky Ghost mini! Its totally not some kid trying to scare the party. Ignore the shoes and eye holes... This was a rather silly remix project of an older model that was a lot of fun to fix up to t

Hello friends! Today I have one rather weird request and another a little more traditional haha. The Eyewing - Imagine a beholder that was also half dragon, but not like the Eyedrake.. no it wanted all the wings and some legs and all lol. Here is the Eyewing! Its rigged up if you'd like a on the gro

Hello friends! Today I completed: Eye Wyrm - The Eye Drake from Fizban's was nice and all, but up the dragon aspects a little more and you'll get this fella :D . Like all my dragons I made sure to split him up into pieces for easier printing. Full files are in Misc Patron Requests - E - Eye Wyrm . G

Hello friends! My first model of the month is the creepy Eyedrake! This was a fun model to put together as it was a nice balance of modeling, sculpting, and rigging work. Full files are in the new Fizben's Treasury of Dragons folder. Tomorrow I'll work on some patron requests! Stay tuned :D

Hello friends! Today I had some fun working on requests and made this Pumpkinholder! Its perfect for a funny Halloween one shot so when this showed up on my feed I just had to make it happen lol. Full files are in Monster Manual - B - Beholder. Yes its printing right now :P Also I had some fun paint

Well folks, it took about two years, but I'm proud to announce that I've updated the Ogre Zombie and Beholder Zombie thus wrapping up my Monster Manual updates from A to Z! I still have to update all the creatures in the Appendices, but at least this part of the book is complete! If you're curious a

Hello friends. Here are a variety of requests I completed recently. Free stl links below: Eye of Flame Beholder - this was a nice sculpting exercise letting me remix my base beholder model. It prints pretty well when flat on its back with supports. Full files are in B - Beholder. Owlbear On All Four

Here is a fun take on my updated Beholder model that I just had to share with you guys. Its a remix made by patron Kitsune. It should print well on its back with supports for FDM. For resin I've uploaded a presupported file too. You can find the file in the B - Beholder folder in the main Google Dri

During the weekends I catch up on painting projects and just relaxing. Yet I can't help but throw in a little work, so all the creatures in the D folder are now presupported and I'm moving on to E. But as for painting projects. here is the beholder I made earlier for one of my Tier Rewards now paint

Today I worked on some of the Tier Reward requests. First we have a Fiend Beholder located in B - Beholders and here: https://www.shapeways.com/product/E7VPF7T6C/fiend-beholder I also made the Steel Defender located in the S folder and here: https://www.shapeways.com/product/QZAFKFL6Y/steel-defender

Thanks to everyone who tuned in today for my live stream! Today I completed some Tier Reward requests that I'll be printing later this week. First we have the Originholder, a creepy homebrew beholder that apparently is the first. Full files are in the B - Beholder folder. You can find it here too: h

During weekends I relax, unwind, and complete fun side projects. This weekend on the Discord patrons proposed I take on Slygar, the "immortal" gold fish of Xanathar. I initially thought it couldn't be done, but I was wrong. Oh so wrong lol. To pull off Slygar I made the bowl, made it hollow, put in

Today I was able to model from the Request Board one of the villains from Waterdeep: Dragon Heist! He's one of my favorite baddies from D&D in general so I'm happy to have completed him :D Full files are in the Waterdeep: Dragon Heist folder. You can find the stl here too: https://www.shapeways.com/

Today I delved into updating the last beholder from the Monster Manual. He should print fine on his back with supports only needed from the build plate itself. For resin same, though lift him up some what so there isn't too much of a resin build up under the model. As for the Barbarians, this was an

Its the weekend so its time to relax, unwind, and work on fun models. I'm rather happy with how this fella came out! He should print fine on his back with supports and a raft. Full files are in the B - Beholder folder under Death Tyrant. You can find it here too: https://www.shapeways.com/product/EU

I figured given the iconic nature of the Beholder I should print a new one for myself, so here he is! You can fine the full files in the B - Beholder folder and attached below. You may need to download each file individually. Onto the next challenge!

Thanks to everyone who tuned in this morning as I 3D modeled Vertex the Gelatinous Cube and a new Beholder! Vertex is printing now and will be handed to Ryan Hartman of the C-team at Pax Unplugged. I plan on printing the new Beholder as well because of its iconic nature :-) You can find Vertex in th