Merregon - Resin and FDM prints!

So obviously the resin print of this is of higher quality. However, I was able to print this fella in FDM as this week my resin printer is down. While I'm waiting for replacement parts my DM needed these guys for an upcoming game so I gave the FDM route a try. While not as high quality as the resin print, I was still pretty satisfied with how they came out. And also given players won't really look up close anyway I'd say its a success one way or another haha.

For the resin print you'd obviously use the presupported file. The supports are pretty easy to remove after doing an alcohol wash for five minutes. But be careful snipping off the supports under the glaive. For the FDM prints I printed this guy on his back with the glaive pointed upward slightly so supports are under the axe. Then I used a flush snipping tool to cut right under the blade and it came off pretty easy. The rest of the supports under him were just a careful twisting and pulling.

My take on the Merregon is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.