Cat Clickers in Their Favorite Cans! 🐱🥫
Hey everyone!
This time, I have a set of three little food lovers for you! These clickers are slightly bigger than the recent frog ones, so they are not keychains this time. Instead, they are little buddies you can place on your desk or shelf, always ready to remind you that the cat is hungry! A very important reminder, of course
The set includes 3MF files, plus labels in two versions.
You can print the labels in 3D, but I highly recommend printing them on paper, cutting them out, laminating them, and then cutting them out again. It creates a really nice effect! However, the 3D printable label files are also included, so you can choose whichever version you prefer.
The label should be slid under the bottom rim of the can. For paper labels, you can secure it with a small piece of tape. For the 3D printed version, you can use a little glue.
My cat is often my tiny source of inspiration in the most unexpected situations. Sometimes it is the cookies I baked with my daughter, and this time... well, it was her favorite flavor
Let me know if you’d like to see more cats like these! :D
Happy Printing :)
Comments (22)
I just joined yesterday and I would love this set of files. I do not see them on MMF. Will they be uploaded there for purchase?
dm
Would you consider making dog versions? I know dog wet food cans are usually taller, but I think these short cans would work just fine. Or maybe dogs popping up from a box of bone biscuits or bag of jerky?
Thanks so much for the idea! 😊 A dog version could be really cute. I’ll keep it in mind for future designs!
Love these, I printed the sphynx and the LH one. I did one on my creality k2 and one on my snapmaker u1, they both had the same issue though, the supports for the upper clicker is too far up? I used slim trees, and I tried organic, I had to do the LG cats twice, due to the supports, break off with the top piece, so now I can't use those cats, I tried slimming them down as much as I could when I re printed, but again, it was really hard not to break the clicker part off, while getting the supports off. Also is there a way to bring the upper clicker part down, or somehow put a box into the cat that the clicker will fit into? Kinda like Maries Button clickers, she has a box that fits around the top part. It will make the kitty alot more sturdy too. And adding a LH Tabby and a SH Tabby would be AWESOME!!!!!!!
Thank you so much for the feedback - it’s really valuable to me! I’ll definitely keep your suggestions in mind for future projects. I’m currently on vacation with my family, so I won’t have access to my computer for a while, and my internet connection is a bit unpredictable too. Thank you again for taking the time to share your feedback! ❤️
Omggggg! I really love them! with keychain version would be cute too
I was double charged on my account can you please reach out to me?
awww thats adorable
Thank you
I made this last night, they are cute but the label doesn’t go all the way around the can. Didn’t realize this till after I laminated them and tried to tape them on.
updated! plz redownload folder, you will find there a new png file: cat-labels-print-laminate-longer (no gap).png I hope it will be better for U :)
You so need to make one of these as a Princess Donut from the Dungeon Crawler Carl books!
OMG these are so awesome, sooo printing these next!!
I love them!!! I need a calico! And a tabby for my daughter lol
They’re awesome! More! More!
What filament did you use for the hairless cat?
Devil Design PLA 1.75mm 1kg Beige - full list tomorrow :)
I love these!! I am a cat lover (I have several of my own) so I always love any cat fun cat print I find. Thank you!
Oh my gosh!! My best friend is going to go catnip. Lol.
Have you sent last month’s files to mmf?
Not yet - tomorow