Download ComfyUI Studio

Thank you for all you do. And thank you very for the Minimax Workflows. I hope you're doing well.

I purchased a paid membership. Can you send me the Discord link so I can download the files?

Hello! Great work! I haven't installed the last update yet. Do I need to go back and do that, or does this update include the previous ones as well? Thanks!

ох уж эти любители, продать бесплатное...

this version can be used with trellis2?

bonsoir je voulais savoir si votre pack contenais des worflows pour ltx2, wan,z image turbo?

i don't find the newly full install on discord last post is 25/05/2025 for me :-)

Mesh

May I installe mes?

Does the studio already make vr videos?

Does the installers etc support linux ? I saw mentioning of batch files, are linux sh scripts given also ?

I have a Mac, and already get subscription. what I need to do?

I have zero I dea for ComfyUI Studio I can learn or not ?

Hi guys, how is here the support? i will like to start whit comfyui download and get ready for creating content, What if i need helf, for install or something else, who can help me?

sorry any one help me . where can i see the file to install it ?

I looked at the update YouTube video but I can't find the link for the update.rar file. Or should I just download all 10 rar files and replace older version of comfy directory. I don't have anything configured yet

how do i downlad the package?

RTX 3080 10gb

Rtx 3090?

and for runpod?

rtx 5060?

Is any point for me to download this version if I have RTX3060 12GB ?

Update 288 All models download size actually is 512GB

what's going on with version 279? I downloaded and installed it before noticing that it had disappeared from patreon Any bugs? the missing loras with XXX I just hope I won't be annoyed when the next upgrade comes along.

Hi, I just subscribed and I cannot find an active Discord invite?

I paid for a one-year membership, and now it's saying I'm on free status. What's that about, sir?

Hi Bro discord blocked in Turkey can you send me message pls

Hi dose anyonecan tell me where is flux kontext in studio?

Thank you for adding Flux's Kontext Dev. I have a request, if possible: could you add the 8-step Hyper Flux LoRA and Tea cache for Kontext Dev? I've seen some YouTube videos where they've included them in Flux Kontext workflows, and they significantly help accelerate image rendering. Could you also implement uscaling and a genre viewer as you have in other workflows?. Thank you. On the other hand there is a problem with images and the image size node. When you upload images with another size you get this error; regardless of the size of the image, it always fails: The size of tensor a (11974) must match the size of tensor b (8160) at non-singleton dimension 1. Even if you put the same dimensions of the image in the node, this error occurs.

I have joined....linked to discord....still don't see the download link...

Hi discord blocked in Turkey can you send other way

where is the link to download comfy ui studio on patreon?

Hey Alex I cannot find the update link in discord

Is there a new release coming soon? can we get a toned down workflow for older machines? I have only 12GB VRAM (max available on my PC), with 24GB of regular RAM (Also max I can use). I have tried GGUF, Nunchaku, SVDQuad workflows with custom nodes (all of which crash and the trifecta of ChatGPT, Grok, nor Deepseek have been able to make me waste dozens of hours in total trying "fixes" to get it to work), nothing helps. I even tried going down to 256x256 and it still takes forever or doesn't finish

v256 ? is that a typo

I dont find ComfyUI Studio in Discord - when i click the link in your profile it leads me to nirvana

I dint see u in my discord at all and really need to update the studio its outdated and won't update the nodes

i cant find you in my discord

are you going to install tryton on any version of comfystudio?

while downloading ALLn MODELS i get this: Downloading sam_vit_b_01ec64.pth to D:\5-MODELS\0-ALL-MODELS-SCRIPTS\..\..\App\ComfyUI\models\sams... curl: cannot open 'D:\5-MODELS\0-ALL-MODELS-SCRIPTS\..\..\App\ComfyUI\models\sams\sam_vit_b_01ec64.pth' curl: (23) Failed writing received data to disk/application

Thank you for your excellent work. I can't find ComfyUI Studio v258 link, only Studio v256 link. Where can I find v258 link?

Is this Revision 258 OR Revision 276?

How well does this run on runcomfy or think diffusion?

I can't see all the channels in Discord. Where do I download the update?

Why discord only now ? I am not a fan of Discord. Too much hazzle with login alltime using this and that account and IP validation.

hello again with the v276 version I get a pyhton error the path where I have comfyUI v276 is this C:\Studio Studio v276 but when I start it appears this error in the console ComfyUI Studio v276 ---------------------- Connect your Patreon account to your Discord account to get early access and daily updates. ---------------------- YouTube: https://www.youtube.com/@ComfyUIstudio -------------------------------------------------------------------------------- Updates are available here: https://www.patreon.com/posts/comfyui-studio-111135526 -------------------------------------------------------------------------------- For assistance, feel free to contact me on Discord: my username is "comfyuistudio" -------------------------------------------------------------------------------- C:\Studio\Studio v276\App\python_embeded\python.exe: can't open file 'C:\\Studio\\Studio v276\\App\\ComfyUI\\main.py': [Errno 2] No such file or directory Presione una tecla para continuar . . .

we have a downloadable pdf with the changes

did you remove the work flow that created coin design's BAS ? or is it renamed i can not find it now, thanks

Thank you so very much for the hard work. It's a real service you're doing for so many of us. thank you!!

PRODUCT BG V2 workflow not working for me : ImageComposite+ too many indices for tensor of dimension 3

Which workflow you recommend me for Background Removal?

Hello. When uploading photos to FluxGym from the 6-APPS folder, an error appears - "Unable to create tensor, you should probably activate padding with 'padding=True' to have batched tensors with the same length". How can I fix it?

Thank you very much for the new update!

Thank you very much for the update and for the improvements in Hidream and Ltx 0.9.7.

Dear author, do you have a ready-made file to use on rented gpu's? Your build for windows would be great if there was a Linux version.

Would amazing if you did a video on every workflow. Like talking about it, and doing a demo with a brief explanation

New version FP8 LTXV 13B 0.9.7 would be great if you could implement it for the next update. It looks like a big change in quality. There are workflows with upscale video on the github page. https://github.com/Lightricks/ComfyUI-LTXVideo

j'ai une erreur avec une rtx 5080 et lous les workflow standards : CLIPTextEncode CUDA error: no kernel image is available for execution on the device CUDA kernel errors might be asynchronously reported at some other API call, so the stacktrace below might be incorrect. For debugging consider passing CUDA_LAUNCH_BLOCKING=1 Compile with `TORCH_USE_CUDA_DSA` to enable device-side assertions

is there a training for all the workflow . video or pdf

It give me error when downloading. "" Running script: 4X foolhardy remacri [63.92MB].bat Downloading 4x_ foolhardy Remacri.pth to H: 1New folder \v26815-MODELSIO-ALL-MODELS-SCRIPTS....App ComfyUI models lupscale_ models... ** Resuming transfer from byte position 67025055 ""

I try to make copy and try to download but links not working . Is it possible to share another location for installation files ? It's very hard to download ..

I just format my pc, installed fresh windows 11, do i need install (get and python) to run comfyui studio?

this script's are'n in the package "5-MODELS/Manual download" (here are the main model downloading scripts) 2️⃣ "5-MODELS/Manual download/big models" (

Regarding your NF4 Flux Workflow i do have a request if possible: Can you please add a Multi LORA Loader to your NF4 Flux template to be activated or not? Regarding ComfyUI Studio Workflow development: I would appreciate SD 1.5 , Pony and Illustrious SDXL workflows you think are in your opinion the best option for creativity one day.

a lot of missing files just after v268 install lot of checkpoints

Frame Pack delivers interesting results. However, as with WAN, the generation times on my RTX4060Ti, 16GB are far too long (33 minutes for 10 seconds video). It would be great if instead of the 'Download all Models.bat' there was one without the video models. This would save a lot of time during installation or updates.

in IC LiGHT 2 the LayerUtility: HLFrequencyDetailRestore and LayerUtility: ImageBlendAdvance nodes are not working, they are missed, and it is impossible to load them by missing node manager. how can i fix it?

Will it be possible to implement Skyreels? https://www.aisharenet.com/en/skyreels-v2/ https://huggingface.co/Skywork/SkyReels-V2-I2V-14B-540P/tree/main

A few revisions ago, your installer automatically installed to my desktop a "ConfyUI" icon. It was the start.bat file with the ico file attached. Can you make that unique launch from the desktop feature permanent in all of your present and future builds?

Can you please make a video on how to use your workflow “VIDEO HUNYUAN LONG VIDEO” and the others, and maybe a general video on the Wan theme, a video with short examples on how to use the workflows

hello, every time i change a variable for example the number of seeds i get this error and I must save the changes and restart Error Cannot read properties of undefined (reading 'beforeQueued')

In Hidream workflow, This error appears, what am I doing wrong? Link 365 is invalid, both origin 133 and target 141 do not exist Link 364 is invalid, both origin 133 and target 146 do not exist Link 363 is invalid, both origin 133 and target 141 do not exist Link 362 is invalid, both origin 133 and target 146 do not exist Link 360 is invalid, both origin 133 and target 146 do not exist Link 359 is invalid, both origin 133 and target 141 do not exist 365 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. 364 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. 363 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. 362 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. 360 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. 359 is def invalid; BOTH origin node 133 is removed and 133 target node is removed. Deleting link #359. splicing 3 from links Deleting link #360. splicing 3 from links Deleting link #362. splicing 3 from links Deleting link #363. splicing 3 from links Deleting link #364. splicing 3 from links Deleting link #365. splicing 3 from links Made no node link patches, and 6 stale link removals

For those struggling with CFG-zero-star and WanFunControlToVideo missing nodes, I managed to fix it but take these instructions with caution since I don't how it affects ComfyUIStudio fully. Luckily, since we're using git, we can revert back to the branch 3.27 which is originally used by ComfyUIStudio. From my understanding, since the two nodes above are part of comfy-core, we need to update our comfyui to version that's higher than 3.27. So I switched the comfyui repo to use the main branch and voila, the nodes exists. I followed these instructions: Since you are currently on a specific tag (v0.3.27), reverting is very straightforward using Git. Here's the safe process: The Safety Net: The Tag v0.3.27 The key is that v0.3.27 is a named reference (a tag) pointing to the exact commit you currently have checked out. As long as that tag exists (which it does, according to your git tag -l output), you can always return to it. How to Revert (If the Update Goes Wrong): Try the Update: Follow the steps from the previous message: cd A:\Comfy_UI_Studio\v223\App\ComfyUI git checkout master git pull origin master Then restart ComfyUI and test if it works and if the nodes are present. If Things Break or Don't Work: If the updated version has problems (errors, crashes, missing features, nodes still not there, etc.), you can easily revert back to the v0.3.27 tag: Open Command Prompt in the ComfyUI directory: cd A:\Comfy_UI_Studio\v223\App\ComfyUI Checkout the tag: git checkout v0.3.27 You should see output confirming you are now in a 'detached HEAD' state again, pointing at v0.3.27. This means the codebase is exactly as it was before you ran the update commands. Restart ComfyUI: Close the server and run Startup.bat again. You should be back to the version you started with.

Hi! V229 Wan video nodes doesn't work

hello. How can I reinstall the V223 version, this one gives me errors in wan video that the other one didn't give me.

Updating missing nodes doesn't work for the latest v29 WAN workflows,WanVideoStartEndDecode_2frames WanVideoStartEndSampler_2frames WanVideoModelLoader_2frames WanVideoVAELoader_2frames LoadWanVideoClipTextEncoder_2frames WanVideoStartEndImageClipEncode_2frames CFGZeroStar WanFunControlToVideo

Diffusers MV Sampler is not fixed on Workflow Character V2

until 3 days ago it didn't give me this error, today reopening comfy gives me this error... Loading aborted due to error reloading workflow data TypeError: graph.nodes is not iterable

im always getting a "Download failed after 5 attempts." error while running the '1-DOWNLOAD ALL MODELS" batch file

Hi3DGEN don´t work on me.got prompt Setting attention backend to: xformers Setting sparse backend to: spconv spconv not available Failed to set spconv or not installed, fallback to default. Loading local model: ss_dec_conv3d_16l8_fp16 Loading local model: ss_flow_normal_dit_L_16l8_fp16 Loading local model: slat_dec_mesh_swin8_B_64l8m256c_fp16 Error loading TRELLIS model: No module named 'spconv' !!! Exception during processing !!! No module named 'spconv' Traceback (most recent call last): File "E:\V229\App\ComfyUI\execution.py", line 327, in execute output_data, output_ui, has_subgraph = get_output_data(obj, input_data_all, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb)

UpdateV229 do not work "The file is in the owner's recycle bin"

Sorry for this but the download links are working again. Thank you.

I had some problems with the software and I decided to clean it and to charge it again, but now the download link is desable and I don't know how to reinstal it.

Hi, having problems with my fresh installation, it wont start. Getting: TypeError: graph.nodes is not iterable

I get this error after running the update script: ComfyUI is outdated, so some built-in nodes cannot be used.

Sorry, you can't view or download this file at this time. Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.

Are you sure someone isn't leaking the urls? Can't download either. "Sorry, you can't view or download this file at this time. Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file that you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator."

error wan Video, Missing node type CFGZeroStar WanFunControlToVideo

It won't let me download the update. It says there are too many downloads.

I've looked all over the interwebs but I can't seem to find clipvision-for-ip-adapter.safetensors anywhere. Is there another name for it?

hello, The sage attention module is not detected, how can I fix this? Warning: Could not load sageattention: No module named 'sageattention' sageattention package is not installed.

link for updates not working

I don't know what is going on when I generate images is taking a lot of space on my SSD although I am deleting all the images I have generated. I am running out of space I keep deleting things from my hard drive. I am going to output folder and delete all the images but that doesn't have much impact if any. How do I solve this what is affecting my storage when generating images even when delete them?

Hi, is there a known solution for the verticle banding or squares showing up on the output renders? Sorry if you answered this before.

i hope the next update will also be for the 50series graphic cards, i had to install the ComfyUI_windows_portable_nightly_pytorch for comfy to work.

Hi! I only downloaded the last version and ran the update. I only see 63 workflows, did I do anything wrong? Thanks!

Can Comfy UI Studio be used on the cloud server service, Mimic PC? I can load the work flows but all the nodes are missing. I don't know a lot about it, but before I try to learn, please tell me if it can be done properly and with your permission

Will it be possible to use the GGUF models for WAN2.1?

I reinstalled and here's what i've got Checkpoint files will always be loaded safely. Total VRAM 24576 MB, total RAM 32619 MB pytorch version: 2.6.0+cu124 xformers version: 0.0.29.post3 Set vram state to: NORMAL_VRAM Device: cuda:0 NVIDIA GeForce RTX 3090 : cudaMallocAsync Using xformers attention ComfyUI version: 0.3.22 [Prompt Server] web root: E:\STUDIO\v219\App\python_embeded\Lib\site-packages\comfyui_frontend_package\static E:\STUDIO\v219\App\python_embeded\Lib\site-packages\kornia\feature\lightglue.py:44: FutureWarning: `torch.cuda.amp.custom_fwd(args...)` is deprecated. Please use `torch.amp.custom_fwd(args..., device_type='cuda')` instead. @torch.cuda.amp.custom_fwd(cast_inputs=torch.float32) Traceback (most recent call last): File "E:\STUDIO\v219\App\ComfyUI\nodes.py", line 2147, in load_custom_node module_spec.loader.exec_module(module) File "", line 940, in exec_module File "", line 241, in _call_with_frames_removed File "E:\STUDIO\v219\App\ComfyUI\comfy_extras\nodes_audio.py", line 1, in import torchaudio File "E:\STUDIO\v219\App\python_embeded\Lib\site-packages\torchaudio\__init__.py", line 2, in from . import _extension # noqa # usort: skip ^^^^^^^^^^^^^^^^^^^^^^^^ File "E:\STUDIO\v219\App\python_embeded\Lib\site-packages\torchaudio\_extension\__init__.py", line 38, in _load_lib("libtorchaudio") File "E:\STUDIO\v219\App\python_embeded\Lib\site-packages\torchaudio\_extension\utils.py", line 60, in _load_lib torch.ops.load_library(path) File "E:\STUDIO\v219\App\python_embeded\Lib\site-packages\torch\_ops.py", line 1357, in load_library ctypes.CDLL(path) File "ctypes\__init__.py", line 376, in __init__ FileNotFoundError: Could not find module 'E:\STUDIO\v219\App\python_embeded\Lib\site-packages\torchaudio\lib\libtorchaudio.pyd' (or one of its dependencies). Try using the full path with constructor syntax.

Hi! Thanks for this nice Work. Could you perhaps also make a template for rampot? So I can download everything at the touch of a button.

Thank you for this. It is a great pack. Browsing through the workflows right now.

Is der a way to update older version instead of download all new?

218 update sir

I made a new Install using V200, Update V205 and Update V215. When starting the cmd window shows the error ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts. broken-source 0.8.0.dev0 requires setuptools~=75.2.0, but you have setuptools 75.6.0 which is incompatible. inference-cli 0.22.2 requires requests<=2.31.0, but you have requests 2.32.3 which is incompatible. inference-cli 0.22.2 requires rich<=13.5.2, but you have rich 13.9.4 which is incompatible. inference-cli 0.22.2 requires typer==0.9.0, but you have typer 0.15.1 which is incompatible. inference-gpu 0.22.2 requires onnxruntime-gpu~=1.15.1, but you have onnxruntime-gpu 1.20.1 which is incompatible. inference-gpu 0.22.2 requires requests<=2.31.0, but you have requests 2.32.3 which is incompatible. inference-gpu 0.22.2 requires rich<=13.5.2, but you have rich 13.9.4 which is incompatible. inference-gpu 0.22.2 requires setuptools<=72.1.0,>=70.0.0, but you have setuptools 75.6.0 which is incompatible. inference-gpu 0.22.2 requires typer==0.9.0, but you have typer 0.15.1 which is incompatible. mediapipe 0.10.14 requires protobuf<5,>=4.25.3, but you have protobuf 5.28.2 which is incompatible. py3langid 0.3.0 requires numpy>=2.0.0; python_version >= "3.9", but you have numpy 1.26.4 which is incompatible. torchscale 0.3.0 requires fairscale==0.4.0, but you have fairscale 0.4.13 which is incompatible. However so far I encountered no errors using the workflows.

in audio 4 missing languages i dont see spanish only JP,hi,fr,F5

I am not able to download the Update v215, Google giving quota exceeded error, even your workaround of copy file is not working. Requesting you support

Wan video is not under video 16, and where is the archive?

would be nice only to download the workflow :)

I cant find the video wan workflow. Downloaded the complete package and downloaded all models completely.

Can I upgrade from V200 to V215 directly and skipping V205 etc.?

any chance you can upload to mediafire instead of google? Since google has that "download quota exceeded..." message. Im not able to download the latest update, and it wont let me make a copy on my google drive, I have 13gb free space.

Workflow pack: v215 Missing Node Types When loading the graph, the following node types were not found WANImageToVideo. but when i open manager and "install missing nodes" there is no results

Can you please make a version that works with Nvidia rtx 5090? I'll be waiting.

hi, on the ACE++ 3 node, it gives me this (missing node type "ApplyTeaCachePatch" and "FluxForwardOverrider"), done with manager (uninstall of the old nodes) then installed new ones but it still doesn't work.

Hello, nice to meet you, I hope you are well. Do you plan to include WAN 2.1?

Can I ask something? If I download a workflow from the internet and it tells me to download nodes or custom nodes, I can't do it, right? And I don't know if I have the Confifui configured correctly because I think it uses more of my RAM than my GPU and it takes a long time to do anything. I have an RTX 4080super. For everything else, the work you've done is very, very good and I will continue to subscribe to Patreon because all this seems impressive!! Even though I don't know how it works, but I will learn!! hehe

Hello, i’m using V201, how can I update to this new V211 ?

HI is this Discord server working (comfyuistudio) ? Can't find it at all

Apply Whisper error in audio 3 folder [WinError 2]

is there a update link or do we have to download all over?

Hello where are the links

Links are not working!

is it just me or are theer no links???

Hi, update writes 318MB. when try to download it shows 6.7Gb.

Hello, I see many issue while downloading All Models : HTTP server doesn't seem to support byte ranges. Cannot resume.

Hi can you add, SkyReels and hunyuan image2video please?

I had to reinstall everything again

I don't understand anything... at first everything works, then I try other workflows, go back to those that worked, writes that these nodes are missing, reinstall custom nodes, they are not installed, gives errors...

In what workflow can I remove unnecessary items from an image? Thanks

Mine still loads with the old version Load Menu. How do I get the new v200 load menu to replace the old one?

workflow PRODUCT GV 2 there is no IP Adapter the product does not change color there

you can make a LORA for a product, such as a bag, and then use two LORAS and combine a girl and a bag. Thanks

I've been using the Vid2Vid V3 and the character stays consistent but the clothing morphs. She's holding a pocket book and then she isn't. Her dress is halter top and then it morphs. Is this just a matter of correct prompt. Any suggestions?

So if I have the v196, just download the update and that's it right?

Damn, I've trained my first two loras, I like it.... Thanks!

buen dia, tengo un problema, al ejecutar 1-DOWNLOAD ALL MODELS.bat, no funciona, sale este mensaje: Error: Folder "5-MODELS/Manual-download" not found. Presione una tecla para continuar . . ., trate de tener una ruta corta, pero aun asi no funciona, pueden ayudarme porfavor?, muchas gracias.

I thought the Flux Lola training would take place both on and in the pictures obtained on the Flux model, but there is SDXL, very bad

Can we use Lora models made else where? I had luck with Fluxgym initially and made a Lora as per your video. But I can't get it to work even after clearing video ram. Your project is great as I've said before. Getting a way to use/make new Lora's would be ideal.

After all the instalation and try to open comfyUI i have this error File "D:\Comfy UI Studio\App\python_embeded\Lib\site-packages\torch\__init__.py", line 245, in _load_dll_libraries raise err OSError: [WinError 193] %1 is not a valid Win32 application. Error loading "D:\Comfy UI Studio\App\python_embeded\Lib\site-packages\torch\lib\cusolver64_11.dll" or one of its dependencies. Press any key to continue . . .apreciate your help

Any way to add workflows for product photography/ Background Generation, relighting with flux?

Do you have a workflow for creating digital influencers?

Does this work with the Nvidia rtx 5090 / 5080?

HI I got this error, can you please tell me what it is? Traceback (most recent call last): File "C:\V196\App\ComfyUI\main.py", line 11, in import utils.extra_config ModuleNotFoundError: No module named 'utils.extra_config' Press any key to continue . . .

Hello! Is it possible to use ComfyUI Studio on Runpod?

Is there a video how the update is done? "Workflow Update Instructions: -Create a new folder in studio root folder. -extract the archive files in that new folder. -Run the "update.bat" script. -Run the "Download all models" script. -Install missing custom nodes if missing."

Just updated this "UPDATE V196.rar" (560MB), then only realized I have V190, not V196. Hope it's fine.

Hi! What could be the problem? I use all of your models and it gives me this error when I use inpaint and lora? "Requested to load Flux ERROR lora diffusion_model.img_in.weight shape '[3072, 384]' is invalid for input of size 196608 loaded partially 9420.495801635741 9420.431640625 103"

Hi! Do you have a workflow with Florence 2?

Hi i'm getting this error: # ComfyUI Error Report ## Error Details - **Node ID:** 34 - **Node Type:** D_LatentSyncNode - **Exception Type:** RuntimeError - **Exception Message:** File not found: H:\COMFYUI STUDIO\V196\App\ComfyUI\output\latentsync_rqafi_out.mp4 ## Stack Trace ``` File "H:\COMFYUI STUDIO\V196\App\ComfyUI\execution.py", line 327, in execute output_data, output_ui, has_subgraph = get_output_data(obj, input_data_all, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "H:\COMFYUI STUDIO\V196\App\ComfyUI\execution.py", line 202, in get_output_data return_values = _map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "H:\COMFYUI STUDIO\V196\App\ComfyUI\execution.py", line 174, in _map_node_over_list process_inputs(input_dict, i) File "H:\COMFYUI STUDIO\V196\App\ComfyUI\execution.py", line 163, in process_inputs results.append(getattr(obj, func)(**inputs)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "H:\COMFYUI STUDIO\V196\App\ComfyUI\custom_nodes\ComfyUI-LatentSyncWrapper\nodes.py", line 297, in inference processed_frames = io.read_video(output_video_path, pts_unit='sec')[0] # [T, H, W, C] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "H:\COMFYUI STUDIO\V196\App\python_embeded\Lib\site-packages\torchvision\io\video.py", line 271, in read_video raise RuntimeError(f"File not found: {filename}") ``` ## System Information - **ComfyUI Version:** 0.3.12 - **Arguments:** H:\COMFYUI STUDIO\V196\App\ComfyUI\main.py --windows-standalone-build - **OS:** nt - **Python Version:** 3.11.8 (tags/v3.11.8:db85d51, Feb 6 2024, 22:03:32) [MSC v.1937 64 bit (AMD64)] - **Embedded Python:** true - **PyTorch Version:** 2.3.1+cu121 ## Devices - **Name:** cuda:0 NVIDIA GeForce RTX 3090 : cudaMallocAsync - **Type:** cuda - **VRAM Total:** 25769279488 - **VRAM Free:** 22096180210 - **Torch VRAM Total:** 5268045824 - **Torch VRAM Free:** 3018388466 ## Logs ``` 2025-02-06T21:01:34.364431 - 2025-02-06T21:01:34.605431 - Doing inference...: 48%|█████████████████████████████▋ | 11/23 [01:06<00:28, 2.37s/it]2025-02-06T21:01:34.727431 - 2025-02-06T21:01:34.727431 - Sample frames: 16: 0%| | 0/20 [00:00

Hi, on looking at both download links one is named v196a and the other is v196, the v196a is bigger what's the difference?

Is it just me, or are the download links for 193 pointing to a folder with 190a in it?

Download all models is saying failed after five attempts on all models but then also immediately saying downloaded successfully. Is it still working?

Unfortunately, the update to V193 did not run entirely without problems. I had saved my own or modified workflows in two subdirectories of the workflows. These were all deleted and I now have to re-import them from generated files. I will be sure to back up my data before the next update.

Those downloads are slower as sleeping turtle from Google Drive. No way to speed them up with file from your webpage? Did this Comfy UI support Stablity Matrix you have all models from all AI Software in one Model Folder only?

Hello I was wondering whether there is a proper installation guide/Instructions as I am kinda lost. I have downloaded all the RAR files from the v90 folder.

Thanks for your great work! I wonder if its possible to add another "2000px Latent Upscale" type workflow, but with Flux? I could`nt find any other workflow using the "segment" processing in the Union ControlNet, but if there is already, or easy way to adjust it, please let me know. Thanks in advance!!

Hi, are you planning to add support in the future for Cosmos from Nvidia? You need to update comfy in order to make it work. Should I install a seperate version of comfyui for Cosmos? Since updating comfy might break your workflows right?

Hi, I messed up I updated everything instead of just the nodes, I read that you explained to a user to replace only certain files, I can't find the explanation to replace the files without starting from scratch with the installation. Can you help me?

hey ive been scratching my head for the past 2 days, on the audio 3 workflow im getting this error File not found: F:\2025 comfyui studio\V190\App\ComfyUI\output\latentsync_exadn_out.mp4, [NULL @ 0000019ff503bb80] Unable to find a suitable output format for 'F:\2025' F:\2025: Invalid argument Error during inference: File not found: F:\2025 comfyui studio\V190\App\ComfyUI\output\latentsync_tfckg_out.mp4 Traceback (most recent call last): File "F:\2025 comfyui studio\V190\App\ComfyUI\custom_nodes\ComfyUI-LatentSyncWrapper\nodes.py", line 297, in inference processed_frames = io.read_video(output_video_path, pts_unit='sec')[0] # [T, H, W, C] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "F:\2025 comfyui studio\V190\App\python_embeded\Lib\site-packages\torchvision\io\video.py", line 271, in read_video raise RuntimeError(f"File not found: {filename}") RuntimeError: File not found: F:\2025 comfyui studio\V190\App\ComfyUI\output\latentsync_tfckg_out.mp4 !!! Exception during processing !!! File not found: F:\2025 comfyui studio\V190\App\ComfyUI\output\latentsync_tfckg_out.mp4 Traceback (most recent call last): File "F:\2025 comfyui studio\V190\App\ComfyUI\execution.py", line 327, in execute output_data, output_ui, has_subgraph = get_output_data(obj, input_data_all, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "F:\2025 comfyui studio\V190\App\ComfyUI\execution.py", line 202, in get_output_data return_values = _map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "F:\2025 comfyui studio\V190\App\ComfyUI\execution.py", line 174, in _map_node_over_list process_inputs(input_dict, i) File "F:\2025 comfyui studio\V190\App\ComfyUI\execution.py", line 163, in process_inputs results.append(getattr(obj, func)(**inputs)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "F:\2025 comfyui studio\V190\App\ComfyUI\custom_nodes\ComfyUI-LatentSyncWrapper\nodes.py", line 297, in inference processed_frames = io.read_video(output_video_path, pts_unit='sec')[0] # [T, H, W, C] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "F:\2025 comfyui studio\V190\App\python_embeded\Lib\site-packages\torchvision\io\video.py", line 271, in read_video raise RuntimeError(f"File not found: {filename}") RuntimeError: File not found: F:\2025 comfyui studio\V190\App\ComfyUI\output\latentsync_tfckg_out.mp4

Unable to join discord,

Unable to join discord, Please let me know, I am facing a "Missing Node Problem F5TTSAudioInputs". I tried uninstallation and Installation via comfy manager

thx for the audio generator!, been waiting for a long time :), another suggestion would be video maker from a series of images (slideshow) which you can either get the images generated batch uploaded.

Hello - I have ComfyUi running beautifully. Having a problem launching FluxGym. It all installed fine but the "RUN" .bat opens breifly then closes - therefore failing to launch FluxGym. Can I edit the .bat somehow to get it to trigger app ? Current prompt is "@echo off cd fluxgym call venv\scripts\activate.bat python app.py call venv\scripts\deactivate.bat cd.. "

Hi, I can't make cosmo img2vid work, the VAE node is red, looks like I'm missing the cosmo_cv8x8x8_1.0.safetensor, where to get it ?

Please, how can i install F5-TTS?? FFmpeg is installed.

Need more video tutorials, its so slow with a 4090 RTX for your workflows.

I can't download the Workflow pack: v184 says I don't have permission?

i just downloaded the new v190 and workflows i do not see the install files anywhere like was shown in the video on you tube that got me here also none of the menus show up like on the right side to select any work flows any help??

For Video, I also get Missing Node Types When loading the graph, the following node types were not found DownloadAndLoadPyramidFlowModel

I get this on Audio 3 Installation Error: ComfyUI F5-TTS install failed: Failed to clone repo: https://github.com/niknah/ComfyUI-F5-TTS

After Update. (update.bat > download all models). I got an error on AUDIO3 IMAGE TO VIDEO + LIPSYNC workflow. "raise ImportError(f"Failed to execute module: {str(e)}") ImportError: Failed to execute module: No module named 'decord'"

I wish you could link to individual work flows....i do not need 120 GBs of download when I am only going to use a handful of workflows.

"UPDATE V190.rar" (560MB) Sorry, you can't view or download this file at this time. Maybe you can add more links ?

I note the size of 190 at "Download the 34GB ComfyUI Studio package" ~ but ~ I am not finding an rar file of this size. Am I missing something here?

Hi, Ive just updated the v184 last week, can i just use the : Workflow pack: v190 to update?

When you say: "To fix errors: Extract a new studio, replace the "models" from old studio to the new one.", I think it should be the opposite, isn't it? You should replace the old models with the new ones, right?

Thanks for the update. What has changed since v185, and also is there an individual update only file or do I need to download v185 again for the included updates. Again thanks.

Excellent! I faced a problem with generation of 3d models. I tried to install nodes myself, but failed. Is it possible to integrate Comfy3D_Pre_Builds into ComfyUI Studio?

Hi, I get this error in the audio stream: Apply Whisper [WinError 2] The system cannot find the file specified

HI! I'm getting this error using AUDIO workflow " Apply Whisper"

Great work like always but the new TEACache node creates that and stop generation: Failed to validate prompt for output 325: * TeaCacheForImgGen 602: - Value not in list: model_type: 'False' not in ['flux'] - Failed to convert an input value to a FLOAT value: rel_l1_thresh, flux, could not convert string to float: 'flux' Output will be ignored

Hi there. When trying to use character v3 workflow I get this error in Ksampler node: This Controlnet needs a VAE but none was provided, please use a ControlNetApply node with a VAE input and connect it. Can anyone help? thanks!

I can't download the file. keep getting file has been downloaded too many times. can you please create one more link

HI, thank you for this update! Unfortunately, I keep getting the error that downloads have exceeded its quota for these files, I am also unable to make a copy to my drive.

Thanks for this, can you help me - On the 2000px BATCH prompt i get this error - got prompt Failed to validate prompt for output 24: * VAEDecodeTiled 51:4: - Failed to convert an input value to a INT value: overlap, , invalid literal for int() with base 10: '' Output will be ignored [INFO] LoadPromptsFromFile: file found 'MORTAL COMBAT CHARACTERS 4.txt' Prompt executed in 0.03 seconds

Amazing.... Thank you for the Watermark Workflow

I hope there will be a "WF" to change the strong backgroup, you change the outfit as requested

Excellent update! Is there a workflow, or maybe it can be implemented in the future, to repair the scratches and tears of an old image? it would be the ideal complement to the image restoration workflow! Perhaps also an add-on to correct the desaturated or yellowish colors of color photos from the 70s to the 90s. Thank you!

Just joined and have to say love the work! everything works perfect on my 4080 Super :)

hope there will be a watermark workflow in the near future :)

Hi your latest v172 Info tells Detailed Studio Installation: Download the Studio v168 package in 9 parts to avoid interruptions. --- My latest release is v161 from Dec1 and i did not receive any update e-mail for a v168 Version and i did not see anything here for a v168. And where could one even download this since you refer downloading this? Thx for the v172 Version although the full release tells v171 if i click download. Is there everything correct with the full v172 release being tagged v171 ?

What is FluxGym install.zip?

Good morning I just signed up for Comfyui Studio, I wanted to know how do I ask questions about installing and using the workflows?

INPAINT PRO 10 SIMPLE INPAINT FLUX DEV COMPACT no model in module "Load Checkpoint: flux1CompactCLIPAnd_Flux1DevFp16.safetensors"

Hi...I probably should have checked this before joining. Can I use this effectively with MimicPC or does it have to be run locally?

I tried installing fluxgym but it keeps getting stuck at this code: license_items=['license: other', 'license_name: flux-1-dev-non-commercial-license', 'license_link: https://huggingface.co/black-forest-labs/FLUX.1-dev/blob/main/LICENSE.md'] license_str = license: other license_name: flux-1-dev-non-commercial-license license_link: https://huggingface.co/black-forest-labs/FLUX.1-dev/blob/main/LICENSE.md no samples" Do you have any idea how to fix that?

Hi. Great work. When running Download-All-Models script I got some error Could you please help? // Warning: Failed to open the file C:\Users\user\Downloads\ComfyUI-Studio-v88\UPDATE Warning: V165\files\5-MODELS\Manual-download\..\..\App\ComfyUI\models\controlnet\animatediff\control_v1p_sd15_qrcode_mo Warning: nster.safetensors: No such file or directory 0 689M 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (23) client returned ERROR on write of 15554 bytes Downloading control_v1p_sd15_qrcode_monster.safetensors to C:\Users\user\Downloads\ComfyUI-Studio-v88\UPDATE V165\files\5-MODELS\Manual-download\..\..\App\ComfyUI\models\controlnet\animatediff... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1165 100 1165 0 0 5470 0 --:--:-- --:--:-- --:--:-- 5521 //

i get this error when trying to queue promt: * UNETLoader 440: - Value not in list: unet_name: 'flux1-dev-fp8.safetensors' not in ['IC-Light\\iclight_sd15_fc.safetensors', 'hunyuan_video_t2v_720p_bf16.safetensors', 'lotus-depth-g-v2-0.safetensors'] Output will be ignored Prompt executed in 0.03 seconds what can i do?

hmmm... on both vid2vid workflows i get the message about missing note "ACN_AdvancedControlNetApply_v2". I cant install this missing note as comfyUI cant find it. Manager says: "(IMPORT FAILED) ComfyUI-Advanced-ControlNet" Any help ?

Is there a way to enter API-Key from Civitai? Or what is the reason that much files fail to load? Running script: Flux-uncensored-lora.bat Downloading uncensored-flux-lora.safetensors to C:\AI\ComfyUI-Studio\5-MODELS\Manual-download\..\..\App\ComfyUI\models\loras\FLUX... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1124 100 1124 0 0 7587 0 --:--:-- --:--:-- --:--:-- 7698 100 655M 100 655M 0 0 29.3M 0 0:00:22 0:00:22 --:--:-- 29.8M Download failed after 5 attempts. Script "Flux-uncensored-lora.bat" completed successfully.

Is it safe to update ComfyUI, python_embedded, git-portable and nodes to latest versions? Is there any reason why you're using python 3.11 instead of 3.12 or even 3.13? Thanks

Hello!! I have a question that may seem silly, but what should I do with the attachments? I'm going to download them and then, where should I save them?

Question to Update please: Download and extract "UPDATE V163.rar" -- OK into the "ComfyUI Studio V***/UPDATE V163/" folder. That means I make a folder "update V163" in my comfyui-Studio-Main-folder, right? Run the "update.bat" script from the extracted folder. - OK Run the "Download all models" script (the one in my update V163 folder) This will do a full installation of the models but NOW TO Update V163 Folder. It also not download the delta - it downloads all again. So at tjhe End I have in Update v163: 1-WORKFLOWS, 5-MODELS, App, 1-DOWNLOAD ALL MODELS.bat, Start.bat. .... Should I then copy the content in files-folder manually to the main directory?

I am using Stability Matrix for ComfyUI. Is there a simpler way to inxtall your workflows into ComfyUI using that platfom?

Hi, when I run the "Download All Models", I keep getting "Download failed after 5 attempts" errors.

Hello. Great work. Just a quick question. Does the design of ComfyUI-Studio supports also differnt paths? I have all my additional models on another SSD. Thank you. Have a great day.

Hello, great work! On Character v3 workflow, the top row of images, how would you use those? after i create my dataset, is there anything else i need to do with the top row? Also if i want to install a different chkpnt, do i just manually copy it to the standard models folder in comfyui or do i need to place it in a different location to use it in the Character v3 flow?

i've got this error when i tried to use character v2 to obtain picture to use flux gym to train a lora DWPreprocessor 'NoneType' object has no attribute 'get_providers' i'm using v159 (updated from v157) and i've re downloaded all the models, anyone knows what it means ? i'm using an geforce 3060 wth 12 gos of vram

The extractor is asking for a password

Hello, I run the FluxGym .bat files in order but the application does not open.

thank you for the aweasom workflow, i'v tried hunyuan, but after the generate finish it shows "VAEDecodeTiled" and in the top menu it shows red line and writtn " torch.cudaOutOfMemory Error 73 VAEDecodeTiled"

hi all, When im using Character V3 workflow, im trying to run prompt after uploading an image. then i get an error message "CheckpointLoaderSimple Error While desarializing header: MetadataincompleteBuffer"

Character v3 workflow There are Getty Images Logos / Credits Text in all generated pictures. The Getty logo is always same position middle and there is some other additional mini text / logo is on left bottom corner.

It isn't letting me download or "make a copy". I have 150 can I update to 159?

Hi i cannot download the files since your Google Drive tells the download limit has been exceeded.

Doing a fresh install 154. 1) can I do update 158 without doing 157 first? I don't see a link for 157 that's mentioned above. 2) can I copy the models from my existing 142 folder? 3) could I install 158 in my 142 folder instead?

Hi I get the following error when running the ID+POSE FACE DATASET FOR FLUXGYM workflow: Failed to validate prompt for output 8: * InstantIDModelLoader 22: - Value not in list: instantid_file: 'ip-adapter.bin' not in []

Any chance for a short tutorial on how to use Character V2 workflow?

Hi. I'm trying to use the Character v2 workflow. I'm getting this error. Any idea how to fix? thanks for all your hard work! Failed to validate prompt for output 478: * Searge_LLM_Node 476: - Value not in list: model: 'Mistral-7B-Instruct-v0.3.Q4_K_M.gguf' not in [] Output will be ignored

I downloaded and installed your version of comfyui. When I run it (after updating and all), it displays workflows, but all workflow nodes are not connected and won't connect to each other. No amount of dragging connect points work in any workflow.

I have had nothing but trouble after updating (AND fresh installing). Everything from multiple python errors, getting Comfyui to run, and the following issue...Missing Node Types When loading the graph, the following node types were not found Text Concatenate UnetLoaderGGUF DualCLIPLoaderGGUF

What version of CUDA are you using? I am encountering the following error: [ReActor] 02:06:37 - STATUS - Analyzing Source Image... 2024-12-10 02:06:38.6653699 [E:onnxruntime:Default, provider_bridge_ort.cc:1862 onnxruntime::TryGetProviderInfo_CUDA] D:\a\_work\1\s\onnxruntime\core\session\provider_bridge_ort.cc:1539 onnxruntime::ProviderLibrary::Get [ONNXRuntimeError] : 1 : FAIL : LoadLibrary failed with error 126 "" when trying to load "O:\ComfyUI-studio-v150\App\python_embeded\Lib\site-packages\onnxruntime\capi\onnxruntime_providers_cuda.dll"

I am currently in V88, can I just use update to V150 without downloading the whole 30G file?

Brought my mobile workstation up to 150! Thank you for your patience and help!

what are the changes on 150v?

Hi, What if we already have the previous version with v142 update? does v150 requires fresh installation? Sorry, couldn't understand the process.

hi what the update for this version? and there any update in character sheet workflow?

Thx for great work, but it will be great if you add a Changelog for every update, so we test the newest features instead of navigating into every workflow and checking whats new on it.

Hello, are you planning on adding Flux Redux/Advance?

Maybe this was already answered but can i Use ComfyUI Studio also on a mac?

Hi, how are you doing? Where might I find the "Flux1CompactCLIPand_flux1devfp16.safetensor" needed for the 'Flux CN Depth workflow'? It hasn't downloaded via the "Download All Models". I'm not able to execute the workflow. Thank you.

Hello try Cute You 5 workflow, the cute you openpose woman gives me error: size mismatch for proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1664]) any idea what is happening? thanks

Hi I started download scripts manually cuz I’m already have some of them on my other Comfyui, but in most cases the CMD not complete downloading and when try open it again not working cuz of that I downloading them from Hugging face one by one and added in your models directory but the files have different name I need rename them with the same script name or this not different?

In worflow Morph 2, is there a way to kind of controling a more consistent face? I put a reference photo of female asian woman, but it's morphing to western female :D

Thank you for the update. I have my existing comfyUI in D drive (not portable version) and want to install comfyUI studio in E drive, will this affects the exsiting comfyUI in D drive? should I Just run the bat file of ComfyUI studio? do I need to run virtual environment with ComfyUI studio?

Do you gave a server on Discord?

my question now im already install Comfyui what add models from comfy UI workflow or install it in different drive after download it? and if there any pdf or video explain installing steps ill be appreciate that :)

Im preparing a txt file reviewing all workflow's and ill send it to you in discord when done.

Once again great cinema Alex!

- Value not in list: model: 'lotus-depth-g-v1-0.safetensors' not in list, if you can add it on auto download .bat :)

Ohhh brother, what an amazing update!! Absolutely brilliant, the features you have added and the updates are first class. Your method of installing updates and working with Comfyui are the best I have seen. So much so I have unsubscribe to all other patreons that deal with Comfyui. Nobody come even close. Super happy to be onboard this OceanLiner

Glad I just got a 4TB hard drive. I have been switching between Pinokio, Stability matrix, and Comfyui studio, and seem to have a whole lot less trouble running your program than the other ones. You are awesome.

142 wow ty

Can't wait to see the updates.. all of your workflows are fantastic!

whats new in v88

HI, can I update from an older version by installing and then copying the models folder from the old install and then downloading new models in the new install?

Hello. I get the error message below when I try to open the files with winrar: H:\COMFYUI-STUDIO-V88.PART1.RAR THE ARCHIVE IS EITHER IN UNKNOWN FORMAT OR DAMAGED I also tried with 7zip, same result.

Hello my friend, is there any possibilites in Comfyui settings to show the hidden lines? I tried everything with much succes :( thanks in advance

Error with "flux dev 8" workflow "flux dev" group: Failed to validate prompt for output 325: * CheckpointLoaderSimple 321: - Value not in list: ckpt_name: 'flux1CompactCLIPAnd_Flux1DevFp16.safetensors' not in ['AbsoluteReality_1.8.1_pruned.safetensors', 'SUPIR-v0F_fp16.safetensors', 'flux1-dev-bnb-nf4.safetensors', 'realvisxlV40_v40LightningBakedvae.safetensors', 'sd3.5_large_fp8_scaled.safetensors'] Output will be ignored Prompt executed in 0.00 seconds

I made a copy of all parts of the v88 to my google drive and downloaded and fully extracted with no errors besides the 2084 onnx model but i downloaded that. However, I'm missing the 4 main batch files in the zip files. The START, INPUT IMAGES, OUTPUT IMAGES, and DOWNLOAD ALL MODELS batch files in the main folder...

Is there a way using this workflows in mimicpc comfyui?

hello could you make the wildcards availabe in any worflows ? (i know this is a lot of work) because there are so many worflows where wildcards would be useful, or at leastg make one video on how we can modifiy worflows to add them by ourselves without breaking your work

hi i am getting this error: "File "pathlib.py", line 1044, in open FileNotFoundError: [Errno 2] No such file or directory: 'C:\\Users\\orada\\Desktop\\AI\\App\\ComfyUI\\custom_nodes\\ComfyUI-tbox\\..\\..\\models\\annotator\\LiheYoung\\Depth-Anything\\.huggingface\\download\\checkpoints_metric_depth\\depth_anything_metric_depth_indoor.pt.e25a96605a2ea2dbbe57308d024e89a803fa87fe981bd51d4cee245f1de57977.incomplete' " I see the file in the location but it still says it cannot find it. Any help would be greatly appreciated.

how to update v63 to v 86?

Hi, I am testing the img2Vid Workflow and I get an error message. Does anyone have the same issue? Failed to validate prompt for output 53: * VAELoader 85: - Value not in list: vae_name: 'vae-ft-mse-840000-ema-pruned.safetensors' not in ['taesd', 'taesdxl', 'taesd3'] * CheckpointLoaderSimple 564: - Value not in list: ckpt_name: 'AbsoluteReality_1.8.1_pruned.safetensors' not in [] * ControlNetLoaderAdvanced 127: - Value not in list: control_net_name: 'animatediff\control_v1p_sd15_qrcode_monster.safetensors' not in [] * ADE_LoadAnimateDiffModel 87: - Value not in list: model_name: 'AnimateLCM_sd15_t2v.ckpt' not in [] Output will be ignored Prompt executed in 0.05 seconds Thx in advance

Hi. Can you please tell me if downloading 46 workflows is enough?

Hi, all looks fantast... im struggle to get any models dloading with the .bat files this is a snippet from the cli... curl: (35) schannel: next InitializeSecurityContext failed: CRYPT_E_NO_REVOCATION_CHECK (0x80092012) - The revocation function was unable to check revocation for the certificate. Download completed. anuy ideas to fix, thanks

hey! i fucked up one of your workflows and i have to downlaod the all package again. Is it possible to have a link only for the workflows?

Pity I cant post the image I just did, took an 8,704 image totally small image upscaled it, converted it to a carving, then to a bas relief soo soo soo brilliant.

absolutely brilliant, love the new update, bas reliefs bonus and works fantastic, I can use those with my laser and cnc equipment genius.. ty ty ty...

Also try to run video img-to-video I have an error message that animation.mp4 failed. where can I get that animation.mp4 ? thanks

Fantastic!

I tried to run the Faceswap video, I dont see the output when its done?

"Warning: Missing Node Types When loading the graph, the following node types were not found: XlabsSampler No selected item Nodes that have failed to load will show as red on the graph." I got this error what should I do?

Link 1 and 2 and 3 Download not working !!!! Download Limit.

is it possible to add retouch effect to sequence of images or video?

I can't download the 5,6,7,8 limit it is pointing to

Both the download links have exceeded their limit. Can you put them onto a dropbox link or some such?

Download limit problem with the two links. I can't download part 7. :(

The same problem, download limit on both links.

you have a download limit from google drive, fix it

hi , i tried to download v86 but the download quota exceeded for this file

How to update from v63 to v86? can you add update like you did for v52 to v63? it's so slow downloading all these huge files and already have them

Will the next update include Stable Diffusion 3.5 Large? And maybe more flux workflows?

Hey, thanks! Could you also provide the update archive as well to avoid re-installing the whole Studio setup?

hello everything is fine!! I really liked the work. Now I have this error and I couldn't fix it "ReActorFaceSwap D:\a\_work\1\s\onnxruntime\python\onnxruntime_pybind_state.cc:636 onnxruntime::python::CreateExecutionProviderInstance CUDA_PATH is set but CUDA wasn't able to be loaded. , and that your GPU is supported."

Cute you workflow isn't loading...

Hi, thank you for the updated Studio, I have run into a problem I dont understand. When using the Halloween workflow it highlights the Controlnet Model with an error : ControlNetLoader Error while deserializing header: MetadataIncompleteBuffer. I installed the new version from scratch and all downloads completed. The first time I downloaded the models some of them timed out, but I did the downloads again and all appears to have gone fine.

Hey! Great piece of work, really impressed with what you have crfeated. I have been using the character creator quite a bit, but saddened to see that it does not work properly for most prompts. Struggles to get a biped character in the turnaround range. any chance you have prompts guide as well to get consistent good results?

I am truly impressed by the project you have created using ComfyUI! Your attention to detail and innovation are evident in every aspect of the work. The interface is not only intuitive and user-friendly, but it also significantly enhances accessibility and productivity. The implemented features not only meet current needs but also anticipate future trends. This project is a game-changer, making complex tasks seamless and efficient. Kudos to the team for delivering such an exceptional and well-designed solution. Keep up the fantastic work! I hope to effectively explore every functionality of this vast, boundless, yet accessible project

Hi, I think I'm on update v41, can you advise on the best way to update?

Hi! Does this include an upscaler? And can I run it on google colab?

Amazing new update!!!! All works!! ty for an amazing product!!

UPdate 53 nice surprise works perfectly even if I did have fat fingers and didn't unpack the zip to path lol... absolutely fantastic workflow!!!!!!!!!!!! Thank you very much!! For others that may be interested I generally unpack directly from within the zip, so I don't unpack to path. Which creates the proper directories for the scripts to work. Be mindful of that and you will have no issues or manually create an update folder and put the files and update.bat in there and all will work as intended. TY to the author for putting me straight.

with each update of comfyui studio i'm really amazed by the quality of the work you're doing, i'm very happy to have joined your patreon, money well spent to say the least, congrats.

I must say having now worked with your comfyui studio, apart from a couple of small errors which were not your doing but rather authors of various nodes that have updated their nodes without notice or reference to what the changes are eg IPADAPTER PLUS lol.. The guy went and did a full rewrite of his nodes, which broke a lot of workflows. Easy enough to fix but you have to do a little head scratching first. Anyways I have tried many work flows and been a member of a few patreon's where the promise of something wonderful has been made by others who have failed dismally in my opinion. Broken workflows things that don't work, an underlying lack of knowledge as to how comfyui works and the environment it needs to have to work properly. A stroke of Genius to have comfyui work in its own environment outside the influence of the rest of the system!!! All of your workflows work and are very easy to understand, minimum nodes, easy to expand on and to add to and expand and experiment with. It is very obvious that you understand the way comfyui works the inherent problems that can arise and you have made exceptional strides into making it a one touch install. Supplying a batch file to download the appropriate loras controlnets etc etc, so that we the user do not have to look for them or double up on renamed files by various authors and not having to have double triple the amount of files just in case something was different. Congratulations on a well thought out installer and process for the novice and experienced user!! Can't wait to see what you add on next, you really have taken out the hours of troubleshooting one would normally take. So in summary Thank you for your very hard work, people this is not easy to come up with!!!

hello thank you very much for your work had long been looking for something like this to work with comfyUI, I wanted to tell you that I do not work the lora I follow the tutorial but I always get the same character and does not update the loras, I do not know if I have to activate it in some extra way that for my knowledge I'm not doing or I have to reset something in the workflow, sorry for the inconvenience and thank you very much for your work.

Hey there, im running the model downloader and got 5 of the models with one of them having an error. If i stop it now to restart my computer (have to for an unrelated reason) will the model downloader know to pick up where i left it or will it try to replace the files? Thanks!

I find many interesting Flux.1D checkpoints on Civitai. If I simply copy them into the models/checkpoint folder, will they work? Which ones work and which ones don't?

I like the update very much, although I can't find a good outpaining in FLUX right now. And I know this, user error, but please: I can't activate the selected workflows. Key combination or switch? What should I do?

thanks foe update! Waiting ggufs. Also will be nice to add some of LLM for img2img or upscale workflow.

it would be nice to have the name of the current version we're using in the top of the interface, for example if the update from 43 to 52 worked we should have comfyUI v52 in the top of the interface, then we'll know where we are

hello, comfy studio is great, would it be possible to add a custom folder where we can automatically store our custom workflows (the ones we derived from your basic workflows), in order to backup them all at once and then reimport it globally after an update.

Hello. I really like your work and ComfyUI Studio. It has real potential. But what really gets on my nerves is that I have already carried out an update exactly according to your instructions for the second time and have ruined the entire installation as a result. That doesn't work, as you describe in your YouTube video! So you should urgently revise your update routine. And it would be nice if it were possible to download the latest version directly and reinstall it. Thank you and keep up the good work (apart from the updates ...)

thanks, but can you also post a clean version - fully v53. for clean installation. without these updates?

Please create create comic workflow...??

Since the update FLUXInf takes ages.. 1 image 1 hour on a 4060

will more tutorials follow? yours are awesome

how to update from 41 to 43?

Would it be possible to use a multi LORA loader in those places where single LORA loading is now possible? Sometimes, a mix of LORAs with the right weights is just what's needed to get what you want. And I think a multi LORA loader would slot in just right in the place where there is now a single LORA loader. A multi LORA loader will still allow for loading just a single one for when that's enough. Also, if possible, I'd love to see LORA loading as an option in the 2000px Render + Facefix workflow. I really love that workflow, and it's the one option I'm missing right now :) Thank you very much for all your hard work in developing this set!

Thank you for this beautiful work! I miss two things: one is that you came up with a great solution for outpainting. For example, I am thinking of this: https://www.youtube.com/watch?v=iMxP6sS_nw4 . Since you do not suggest to change the installation, I would be very happy if you could include the outpainting solution you think is good in the ComfyUI Studio installer. Another request: I have exactly the RTX 3090 24GB video card mentioned as an example in ReadMe. And I'm glad that - as you write - you optimized the package for speed AND quality, I would be very happy if you had a Flux workflow version specifically focused on QUALITY. I'll be happy to wait when generating images if I get quality in return! Thank you very much!

Hi, i am on a mac apple M1 Max 64gb memory, i have comfyui installed. and downloading ComfyUI Studio v43 now. I wont get into trouble right?

Just an idea.. remove the "press space to continue" in the download batch file. This way it could download overnight on slow connections.

Hello i'm new, just bough the subscription plan. I have problem installing : Reactor, Photomaker, and Instant ID, ComfyUI ask me to try fix, but after restart module will not be updated or fixed, any idea, or suggestion for install manually? thank you :)

Trying the "PRODUCT BG" workflow, but even after redownloading models i always get the following error: 2024-09-23 16:51:18,029 - root - INFO - Starting server 2024-09-23 16:51:18,029 - root - INFO - To see the GUI go to: http://127.0.0.1:8188 2024-09-23 16:51:43,188 - root - INFO - got prompt 2024-09-23 16:51:43,627 - dinov2 - INFO - using MLP layer as FFN 2024-09-23 16:53:16,143 - root - INFO - model weight dtype torch.float16, manual cast: None 2024-09-23 16:53:16,144 - root - INFO - model_type EPS 2024-09-23 16:53:35,857 - root - INFO - Using pytorch attention in VAE 2024-09-23 16:53:35,858 - root - INFO - Using pytorch attention in VAE 2024-09-23 16:53:43,370 - comfyui_segment_anything - WARNING - using extra model: /home/volker/docker/comfy-ui/ComfyUI/models/sams/sam_hq_vit_h.pth 2024-09-23 16:55:17,516 - root - INFO - Requested to load CLIPVisionModelProjection 2024-09-23 16:55:17,516 - root - INFO - Loading 1 new model 2024-09-23 16:55:17,809 - root - INFO - loaded completely 0.0 3522.953369140625 True 2024-09-23 16:55:18,666 - root - ERROR - !!! Exception during processing !!! Error(s) in loading state_dict for Resampler: size mismatch for proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1664]). 2024-09-23 16:55:18,667 - root - ERROR - Traceback (most recent call last): File "/home/volker/docker/comfy-ui/ComfyUI/execution.py", line 317, in execute output_data, output_ui, has_subgraph = get_output_data(obj, input_data_all, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/volker/docker/comfy-ui/ComfyUI/execution.py", line 192, in get_output_data return_values = _map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/volker/docker/comfy-ui/ComfyUI/execution.py", line 169, in _map_node_over_list process_inputs(input_dict, i) File "/home/volker/docker/comfy-ui/ComfyUI/execution.py", line 158, in process_inputs results.append(getattr(obj, func)(**inputs)) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/volker/docker/comfy-ui/ComfyUI/custom_nodes/ComfyUI_IPAdapter_plus/IPAdapterPlus.py", line 822, in apply_ipadapter work_model, face_image = ipadapter_execute(work_model, ipadapter_model, clip_vision, **ipa_args) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/volker/docker/comfy-ui/ComfyUI/custom_nodes/ComfyUI_IPAdapter_plus/IPAdapterPlus.py", line 441, in ipadapter_execute ipa = IPAdapter( ^^^^^^^^^^ File "/home/volker/docker/comfy-ui/ComfyUI/custom_nodes/ComfyUI_IPAdapter_plus/IPAdapterPlus.py", line 71, in __init__ self.image_proj_model.load_state_dict(ipadapter_model["image_proj"]) File "/home/volker/docker/comfy-ui/comfyui/lib/python3.11/site-packages/torch/nn/modules/module.py", line 2215, in load_state_dict raise RuntimeError('Error(s) in loading state_dict for {}:\n\t{}'.format( RuntimeError: Error(s) in loading state_dict for Resampler: size mismatch for proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1664]). 2024-09-23 16:55:18,668 - root - INFO - Prompt executed in 215.43 seconds

Can u upgrade workflows to Flux and Flux+Lora?

since a reinstalle v43 from fresh i can't find some workflows like the 1845 artists, is it possible to import them from previous versions if i decompress v36 ou v41 besides my v43 installation without launching them ?

Hi, in the Youtube video I'm seeing workflows with LORA support, in my fresh V43 install I am not seeing these. Is there anything else I need to add for this? Or is LORA now supported in a different method in the regular workflows? I do see some LORA boxes in some workflows, but these are mainly disabled.

is it possible to use wildcards in prompt, i'm more used to fooocus where i have a list of text files in a wildcards directory, in each text file there is one parameter per line and when i want to use it as a part of a prompt i type (for exemple) face portrait of a __cats__ and fooocus replace __cats__ with each line in the cats.txt in my wildcards directory, is is possible in comfy studio, and if so could you do a video on how to do it.

Wow, great update. Is it possible to make the node lines visible? I want to adjust some nodes to my own preferences.

I didn't read all the comments. So I'll ask; Are there any new workflows?

Hi, I also unzipped the file, ran the update all models and all good, but when I start -RUN-VENV and switch to any of the ID workflows I get the error. Missing node: ApplyinstantID, InstantIDFaceanalysis, and InstantIDmodeLoader. I then tried different solutions from the github of InstantID, Reactor and InsightFace, also did some pip downgrades for example numpy, now my complete installation seems broken. Is there any possibility to bring it back to work?

I installed your updated #43 from scratch and redownloaded all the models. They all seem to load successfully. However, when running some workflows (eg: Product background replacement) I get the following error: Error(s) in loading state_dict for Resampler: size mismatch for proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1664]).

Can you add a layerdiffusion with batch

I ran the #41 update which worked. Then the #43 update but 2 modules fail to import when Comfy is started. Any ideas what I can try to fix? 0.0 seconds (IMPORT FAILED): D:\ComfyUI Studio\App\ComfyUI\custom_nodes\ComfyUI-GGUF 0.0 seconds (IMPORT FAILED): D:\ComfyUI Studio\App\ComfyUI\custom_nodes\ComfyUI-Crystools

Everything DOES not work perfectly as I got the following when attempting to install models: curl: (35) schannel: next InitializeSecurityContext failed: CRYPT_E_NO_REVOCATION_CHECK (0x80092012) - The revocation function was unable to check revocation for the certificate. Download completed. Press any key to continue . . . I already have another installation on C drive. Comfy Studio installed on External Hard Drive...... update41 loaded

I only have 56 workflows

I cant seem to find the 1845 workflow after updating?

seein this error when trying to run CheckpointLoaderSimple Error while deserializing header: MetadataIncompleteBufferCheckpointLoaderSimple Error while deserializing header: MetadataIncompleteBuffer how can I fix

hi just join this patreon and finish download the pack. Is there any installation guide or installation video for this? I am currently have exisiting comfyui installed, will this cause an error to my existing installation?

Hi question. Unzip the file, ran the update all models and all good, but when I start -RUN-VENV and switch to any of the ID workflows I get an error. Missing node: ApplyinstantID, InstantIDFaceanalysis, and InstantIDmodeLoader. Do I update comfu or look for missing nodes? I notice that the import fails when looking for missing nodes.

Is there also a version for Mac?

Here we use Windows (bat files ...) and I'm on Debian. Therefore it took some time to check the correct Ids of the custom nodes used here. The CSV-Loader (333) uses Windows path separators, after changed those inside csv_loader.py throwing the styles.csv into the correct folder, it seems to run smoothly. This is the list of custom nodes that are used, others were disabled to run this. 1 ComfyUI-Manager 2 ComfyUI Impact Pack 3 ComfyUI Inspire Pack 8 ComfyUI's ControlNet Auxiliary Preprocessors 64 pythongosssss/ComfyUI-Custom-Scripts 71 UltimateSDUpscale 81 Comfyroll Studio 99 ComfyUI_IPAdapter_plus 100 ComfyUI InstantID (Native Support) 138 ReActor Node for ComfyUI 147 Styles CSV Loader Extension for ComfyUI 176 rgthree's ComfyUI Nodes 182 Save Image with Generation Metadata 215 ComfyUi Nodes for External Tooling 216 ComfyUI Inpaint Nodes 253 KJNodes for ComfyUI 333 ComfyUI-CSV-Loader 431 ComfyUI Easy Use 694 ComfyUI-layerdiffuse 814 ComfyUI-AutoCropFaces 1172 ComfyUI-tbox 1196 ComfyUI-AdvancedLivePortrait Nice experience so far. Keep up with it.

is there an explanation about what bat file to activate and what second ?

do i download all three links or just one and extract it?

I'm having trouble unzipping the files. How long does it take for you to unzip? What software do you use?

supported little much as i could,

Unbelievable you are really a Comfy Wizard! Btw, could you add more FLUX workflows in version 37 :)

and i would like to support your work, a created a new workflow "ControlNet union sdxl" it's really good, i can re-create i character in different style, if want it just let me know. "that is a small gift for your awesome work this an example https://youtu.be/PhrScECoCL0

Hi, I want to thank you for this awesome workflows I've tried it and it is really give me a good result, thank you very much. And I have a suggestion for a new workflow in ID+POSE wrokflow, there is a note called depth anything. switch the node with other like canny or line art etc, that will be awesome

i've tested ComfyUI Studio and it is really nice! Thank you for putting this togather.. Question please, Is it okay to update comfy and nodes to the latest? or it has to stay as it is?

Can you please do a tutorial on how to run the 56GB file on a virtual GPU such as Vast.ai? Not all of us have powerful computers to run it locally :(

Hi, I received an update on my local PC regarding the styles and all working fine, but I also use a cloud PC called MimicPC. When I upload the styles file to the directory containing the models, the node doesn't recognize it. I suspect there might be a different file structure. Is it possible to edit the styles CSV loader node to point to a new location? here is a screen shot: https://www.awesomescreenshot.com/image/50393345?key=67fbe5e12e400c304fb45486bb0b8236

Awesome, thanks for all the work!

Any plans to add img2img workflows?