EVERLOST

A little behind-the-scenes for those who’ve been asking about the setup. Most of what you see here is my own work, either made by me or in cooperation with friends - from the rig and steering wheel to the Ambilight and safety net mechanisms. For the past few years, alongside sim racing, I’ve been re

Hi! Small update from the workshop: EL_PHOTOREALISM_LCS 0.1 BETA is ready for testing. It's a photorealism post-processing filter for Assetto Corsa, built for CSP + Pure LCS, paired with its own tuned weather/lighting look. I'm sharing my own settings mainly because a lot of you have been asking for

EVERLOST Engine Tweaks App that adds Ignition, Engine Start and Stall as global features for Assetto Corsa — enable them individually for any car, without touching or modifying that car's own files. 🔑 Ignition, Start & Stall — three independent systems, no need to use all three; pick and choose whi

Hi! I’m sharing an updated PUSH button for the product: https://www.patreon.com/EVERLOST/shop/sim-racing-net-release-mechanisms-350334 Due to recent changes on Patreon, I’m no longer able to add it to the original product as a new revision, so I’m releasing it in this separate form instead. Inside t

Hi all DIY sim racing enthusiasts, Recently, I put together a second AMG GT3 steering wheel using some leftover parts, and I wanted to share a few photos of the project that came out of it. You can also see here how the flanges turned out - they’re available as a digital version in this post: https:

Hi everyone, After recently publishing the updated guide on how to play in 21:9 mode on large 16:9 screens, I’ve noticed increased interest in my Dash for the SimHub app. Since some of you experienced minor issues, I decided to review everything and fix what was necessary. I’ve tested it in: AC + CS

Hey everyone! 2026 has kicked off dynamically. Today, I’m sharing some content that might be interesting for those who play in single-screen mode or are planning to get a monitor for that kind of setup. I hope it will be useful for at least some of you. Until next time 👋 16:9 to 21:9 Hack | Cockpit

Hi everyone! As 2025 comes to an end, I would like to thank you all for the support you’ve given me throughout the year. A lot happened, and unfortunately I have to admit that many „big projects” I started could not be completed due to reasons beyond my control. I truly hope that the coming year wil

Hi! Some time ago I released new mounting brackets for the safety-net mechanisms that don’t require steel cutting or bending and can be printed on any standard 3D printer. These brackets are designed for version 1.2 of the safety-net mechanisms and also fit the limited 2.0 version which is not avail

In this video I’m showing my latest replica of safety-net mechanisms inspired by the legendary SafeCraft. The link to the original that inspired me is below: https://safecraftracing.com/products/ I’ve never had the original in my hands, but thanks to the kindness of my friend, who had access to cert

Hi! In this video, I’m showing how the magnetic cap system works. It’s installed in place of the steering wheel horn and is available as a digital product in the store for DIY 3D printing. Here’s the direct link: https://www.patreon.com/posts/137844351 Please note: manufacturer emblems are not inclu

I’m pleased to announce that new mounts have been added to the project, which can be produced using FDM 3D printing technology. The steel version, cut with CNC machines, is still recommended, but if you don’t have access to such services, the printed option should work reliably. Due to changes on th

Hey everyone! I’m excited to announce that work on Halo X has been completed, and the project will soon be available in my Patreon shop. Stay tuned 🙌 Halo X: The DIY Steering Wheel Teaser (YouTube)

Hi everyone! I’m happy to finally share this post. Although the site el-studio is still under construction, a few new things have appeared there. One of them is the option to get 3D-printed parts for the production of my projects. This is great news for those who don’t have the equipment needed for

Hey everyone 👋 I recently uploaded a review of a really interesting set of racing pedals for sim racing. Of course, I also designed a few optional 3D-printable add-ons for them — they’re now available in the store. Add-ons: https://www.patreon.com/EVERLOST/shop/simnet-3d-printed-add-ons-2017234 Rev

Hi there! Lately, I’ve been working on bringing the screen as close as possible while keeping the safety nets and their release mechanisms fully functional. To achieve that, I redesigned the right-side bracket – it now has a shape that doesn’t push the screen out as much as the previous version. It’

Work on a new product is in progress, but I can’t decide which enclosure to choose. What do you think looks better – the standard fuzzy skin or the Voronoi pattern?

Hey everyone! I don’t do this often, but I’ve put together a review of the HyperShift by AW Another Way for you. Most of the details can be found in the video and the description below it. Enjoy watching! 🙌 HyperShift from AW Another Way - REVIEW (YouTube)

Hi everyone! The latest project I’m working on in the meantime will be equipped with this steering wheel. It’s an old, very cheap, and very popular model that many of you already own. I tried to buy a version of this rim without the OMP logo, but I had to return two wheels—even though they looked id

Hey everyone, hope you’re doing well! Just dropping this fun little video today. A video with Kareem Jaber and his crazy Nissan 350Z Senshi 😎 You can follow Kareem on his social media: https://www.instagram.com/lowki_z33 The “turbocharger” you see in the video is actually just a driver cooling fan

Hey everyone! Just a quick update today about a change to one of the products that was previously available in the shop as the MiGE ST130 Front Mount. The product is now called the Front Mount Bracket and features updated mounting holes, making it compatible with a wider range of wheelbases. I perso

How’s it going? Ready for the heatwave? Now’s a great time to get your air conditioning ready — or install this crazy fan on your sim rig! 😅 I finally managed to finish this wild and fun project: a turbo-style driver fan. Some people design active brake pedals, others… well… 😅 Assembly video: http

Hey there! I just launched a new page that's still very much a work in progress — but it's already useful enough to share, especially if you're into sim racing, DIY gear, or 3D printing. https://el-studio.netlify.app/ Right now, you’ll find a few handy tools on the site: 🏎️ Sim Racing Wheelbase Com

Working on five projects at the same time is definitely four too many, but I’m hoping that two of them—designed specifically for the community—will be ready for the shop soon. Let’s stay hopeful that everything goes according to plan! 😅 In the meantime, thanks for your patience 🖤

Hey everyone! 🙋‍♂️ I’m still fully absorbed in building the replicas of two steering wheels for my simulator, but today I want to take a moment to share a short video presenting my simple DIY Ambilight in action. If you’d like to build a similar lamp, here’s a link to the instructions: https://yout

Hey everyone! It’s been a while since my last update, but I’m working on changing that! Right now, I’m fully committed to two extremely challenging private projects—custom sim racing wheels—which are taking up all of my time. But once they’re done, you can definitely expect some exciting new release

Hi everyone 🙋‍♂️ 2024 is coming to an end, and it’s been an incredible year. I’m so happy to see this community growing, with more people joining and sharing with me their amazing builds based on the projects I’ve shared. It’s inspiring to see how much creativity and passion you all have! In this p

Hi Patrons! 🙌 Today, I installed the latest Pure for Assetto Corsa, and I’m absolutely blown away by the progress made over the last few versions. The improvements are incredible! If you’re still playing AC, I highly recommend trying the latest CSP combined with Pure LCS – as long as your hardware

Hey, In this post, I'm sharing my .SimHUBdash profile for the dashboard shown in this video. To get full functionality, you'll need the following applications: - SimHUB - RivaTuner - MSI AfterBurner It's a good idea to download SimHUB first, test it out, and decide if the basic functionality is enou

Hi! As I mentioned earlier, today I’m sharing my profiles for the DIY ambient lighting control app - Prismatik. Once you put them in their directory, all you need to do is fine-tune them for the car you plan to drive by setting the color sampling zones from the screen. You can find the full tutorial

Hi everyone, Following the needs of those supporting my Patreon, I’ve decided to try creating a mount for Moza wheelbases for the R5, R9, and R12 models. The plans are already available in the store, but I haven’t had the chance to personally test these products—I use a different wheelbase. I’ve mad

Enhance your sim racing setup with this practical Gloves Hanger! This digital model is designed for 3D printing (e.g., using FDM technology) and features easy mounting with four M8x16 screws, spaced 40x40mm apart, making it a perfect fit for aluminum profiles measuring 80x40mm or wider. The hanger i

Hi all! Soon, I'll be posting this updated Arduino sketch for all members, along with the settings I use in the Prismatik app. Everyone who followed my guide (https://youtu.be/G4CUGM9aoTI) and chose the 60-LED layout will be able to switch the standard Red-Green-Blue flash animation to this red load

Looking back at my first small sim racing setup, I never expected it to grow this much. Thank you all for the support. Together, we’re creating something amazing! #simracing #simracingsetup #porsche #diy #ambilight (YouTube)

Hey everyone! A new digital product has been added to the store: a face mount for GoPro cameras. Of course, you can use widely available cheap mounts like head straps or mouth mounts, but personally, I found they didn’t work as well as I wanted (I haven’t tested mouth mounts because they seemed like

I’m excited to announce that button box projects for your simulators are now available in the store! If you’re passionate about this and wondering how to get started, this might be just for you. You can find all the information in the video description and in the product descriptions in the store. H

Hey everyone! I’m finally able to share a project I created over a year ago. I know it might seem a bit odd to some, but many of us enjoy these kinds of decorations or want to replicate as much as possible from the real racing world. That’s exactly what I did. As many of you know, I was determined t

Hi Patrons! Today I'm sharing a 3D model that needs no introduction. I used this model in the past, and I hope some of you will find it useful. By the way, I'll soon be adding a few interesting things to the store for your racing setups. Stay tuned!

Hey everyone! I've finally completed work on the mod, thoroughly tested it, and it's now available with a brief introduction. I hope everything works as smoothly for you as it does for me. Let me know in the comments if everything is running well and what you think of it. Good luck modding your favo

Hello everyone! It looks like I’ve completed version 2.3 of the Start Engine & Ignition mod for Assetto Corsa (fake anti-lag too). I’ve made a lot of changes that make tuning for specific cars much easier. The mod should also no longer cause issues for users with manual gearboxes (life will verify �

Due to the launch of the digital products store, most posts containing digital content on paid subscription tiers will be removed as of August 31, 2024. Since many people are mainly interested in purchasing specific products, the store will be a more practical solution. I will also continue to provi

As promised, I am also sharing the second model of the cup holder with an interesting twill wall texture. The package includes an STL file only. Enjoy :)

As promised, I am sharing the model of the cup holder in the smooth version. The package includes a STEP file and an STL file. Enjoy :)

Hi! I’ve been away for a while, but my vacation is over and it’s time to get back to work. Since I really wanted to test a new texture for 3D printed walls, I thought I’d take this opportunity to create a little something for the community in the form of a cup holder. The cup holder is designed to b

Hi! Since I am currently building my rig using 8040 profiles, I thought I would share the mounting for the SimJack Pro controller. The mounting is designed to be installed using M8x16 screws. Additionally, I'm providing a side cover for the controller, which can be used to create a grounding connect