The Jawa Collective

Time to be more machine than man with Echo's droid disguise helmet! This helmet's design includes a main dome and a mask that can swivel up using 2 M6 bolts and nuts. These bolts are covered by the hinge caps so everything looks hidden. Base helmet is scaled for a 23" head. Features include: Swivel

Back on patrol. The NCR Ranger Helmet (Season 2 Show Variant) is a screen accurate build designed for cosplay, clean printing, and most of all, patrolling the wasteland. Features • Files split for easy printing on 256 mm build plates • 3MF file included • Magnetic tabs for quick mask attachment whil

New from LL3D today we have the Zero Company DH-16 Blaster Pistol! Originally intended to be premiered during the Rogue One: A Star Wars Movie, this blaster was later removed from the final cut of the film. Based on a FN-Five Seven airsoft pistol this blaster would make a fine addition to any kit! F

New from LL3D the Zero Company RG-4D Blaster is now available! This formidable blaster was made use by the droids of the Republic Era police force and measures roughly 20.5 inches long. Features: ◽ Bambu Studio 3MF for easy printing setup ◽ Split files to fit a 256mm printable area ◽ Textured grip ◽

Now Available, The Halo Infinite Artaius Helmet! This is one of my personal favorite helmets from Infinite, and is based on the ODST concept art for Halo 3. Features - Scaled roughly for a 23" head, helmet is a bit tight around the ears - Split to fit a 256mm print bed at default scale - Multiple as

We love doing mash-ups of helmets and this helmet takes two great genres that mesh well together. This helmet is highly optimized to save material while printing as everything is split and separated for efficiency. File set includes: Visor stand in for resin printing Splits for 256x256x256mm beds Al

"We count 30 Rebel ships, my Lord. But they're so small they're evading our turbolasers" Welcome to September! Starting off the month from LL3D we have the XX-9 Turbolaser! Commonly used aboard Imperial Star Destroyers these fearsome defense weapons had an optimal range of 15km ranging all the way u

"You're in luck, I'm the only one hereabouts who has this...but you might as well dona yearly subscription, it would be cheaper I think" The Watto helmet is here! Watto is such an iconic part of Episode 1 and I thought it would make for a fun paint job and some silly costumes. Features include: Spli

Hey Everyone! We have closed the Patreon shop on here since it seems more tedious to keep up with and clunky. If you didn't know there was a shop, then no nothing will be missed! We will still have the 50% off code for models on the website included in the membership if you are looking for an older

"My response times are quicker than organics, and I'm smarter too." The droid bounty hunter Q9 wearable helmet is now available! Features include - Bambu Project Files for both P1S and H2S Sized Printers - High detail parts separated for resin printing - Slots for 8x2mm magnets to attach and remove

Ever wanted to showcase one of your favorite medals? This bundle offers many ways to show your Splatter Spree. These files will be a pre-colored .3mf file for both the P1P and the H2D sizes. Some individual STL files will be included but they will not retain the color data for the model due to the n

"Let me give him my "Welcome to Earth" gift basket." Now available, the Halo 2 Anniversary ODST Armor and Helmet! Armor Features - Armor is split to help minimize unnatural seams that need filling - Openings for straps on the shins, torso, and shoulders - 3MF included with extra plane cuts for 256mm

Vote for your favorite files from July 2026. The feedback helps us know what files you guys want to see more of! Thank you, - Kyle

New month new files! Welcome to August! Today from LL3D we have another Star Wars staff! The Nikto/Barada/Yak staff as seen in RoTJ being wielded by the Skiff Guard in the background during the Sarlacc Pit Scene and is also the staff that Han uses to pull up Lando from the pit. Features: Staff measu

Now available the Nobel Gundam head from G Gundam! File features Include: - Fully colored Bambu Project File - Split files for 256mm cubed printers - Alignment ridges and keys for easy assembly - As many parts split for single color printing Happy Printing! -Rogue

The first real "Droid" in space is now available as a wearable helmet! Robonaut 2 was the first humanoid robot put into space during the NASA space shuttle mission STS-133. The helmet itself looks like it could be found inside the Star Wars universe so I thought it would be a good fit for a model as

“Just point me at the enemy and stay out of my way.” Delta Squad is here from one of the most iconic Star Wars video games ever released. These files were made with the intention of being the most accurate Clone Commando helmet files possible, specifically from Republic Commando. That said, I know t

Happy belated 4th of July from LL3D with the greatest firework of all time, The Void-7 Seismic Charge!! This iconic weapon creates its signature sound and detonates with concussive waves of blue light obliterating everything in its wake. 100% scale measures out to be about 30" in length but even pri

"We can't expect God to do all the work" Now available, Joshua Graham's iconic handgun, A Light In Shining Darkness, from Fallout: New Vegas Honest Hearts DLC! Features - Split to fit most printers on one plate - Generic .3MF Plate Layout File - Removable magazine, uses 4x 8x2mm magnets

Vote for your favorite files from June 2026.

"That was the worst throw ever. Of all time. Not my Fault. Someone put a wall in my way." - Agent Washington and Caboose RvB The Brute Spike Grenade is probably my favorite grenade from halo just due to its raw look. Some of the blades are very small so be mindful when slotting them into place as th

Now available is Queen Amidala's throne headdress as seen in Episode I! This model went through a fair bit of R&D to make sure it was accurate and cosplay friendly. Below are all the features we included to make this the Headdress the best one to print. Features: Separated main parts for easy print

Today from LL3D we have a Old Republic style Vibrostaff! Based off in game files for the ToR game this staff stands at roughly 60in tall and is the perfect addition to your next kit. Features: - 3MF for easy setup - Split parts for 256mm printer bed - Studded or blank bottom section - Requires a 3/4

Now available is the Grand Inquisitor Armor as seen in the animated show Tales of the Empire. This armor is a good blend of the live action armor we saw in Kenobi and the Rebels show. This armor set features: Split bracers for comfortability Pre-cut 3mf for smaller printers Solid and hollow back opt

Vote for your favorite files from May 2026.

A double release to keep you healthy! Now available from Mantis Prop Shop and Rogue Props and Prints, the Halo Biofoam Container and Med Pack as functional storage containers! Features - Pre-Colored 3mf files, as well as a plate layout separated by color - Hinges on the Med Pack are sized to use a f

New file drop! Today from LL3D we have a pair of Fusion Cutters! These hand tools were used by engineers and produced a high energy plasma beam able to cut through dense metals such as duraplast and other reinforced materials. Features: Colored 3MF Included Split for printing Standard or Battlefront

The lights of Vegas never went out. The Mr. House Helmet (Show Variant) is built and designed for clean printing, easy assembly, and looking like you just stepped out of the Lucky 38 top floor. Features • Show inspired Mr. House command helmet • Split for easy printing and assembly • Routed internal

I’m happy to welcome everyone’s favorite baby slug into the world in his full Clone Wars animated glory! These Rotta the Hutt files include two poses and a clone trooper backpack to carry him around in! Features include: Split to fit on modern-sized printers Textured skin to make post-processing eas

Now available, the Halo Reach Haunted/Pilot helmet! Highly detailed, and includes many features such as Scaled for a 23” head Uses 32 8x3mm magnets Cut to split 256mm print beds Two skull variants, closed nose and open nose to help with scaling Skull is magnetized to the inside of the helmet, can be

New from LL3D (Llambland Prints) The Electroripper staff is here! This weapon was used by Enfys Nest the leader of the Cloud-Riders in the Solo movie! Equipped with a high-voltage energy ribbon on one end, and a kinetite charge on the other this weapon was capable of shredding metal and incapacitati

We frequently show previews on the discord but wanted to show some models that are in progress here on the Patreon. Nothing gets released without a test print so for some models it does take a little bit longer to get released. We have listened to a lot of the model suggestions recently and I hope y

Stolen by Jawas from the Boonta Eve Classic Anakin Skywalker's Podracing helmet is now available! This helmet has a fully working goggle flip up mechanism with required hardware parts. 3 different sizes are needed. I personally could not find a 85mm bolt locally to me so used two 35mm on each end of

Vote for your favorite files from April 2026.

Everyone's favorite squid head is here, and I promise, it's not a trap! This cosplay helmet is inspired by the fish himself, Admiral Ackbar, but can easily be repurposed for any Mon Calamari you'd like. Features Include: Split to fit on modern-sized printers Seams hidden in grooves for easy hiding T

Up for release today from LL3D we have a few fun items/greeblies! Included in todays pack are the following: 3 Jawa Greeblies 1 Tusken Raider Greeblie Droid Caller - hollow interior and threaded top for small belt storage Droid Welder - threaded knobs/center (sides are mirrored/ right screws turn co

I've always been a sucker for big weapons and what's better than a big weapon with a massive blade attached to it! This specific brute shot is modeled after its appearance in the Halo 2 Anniversary campaign and comes fully separated for lighting Some of the larger pieces will connect together with 1

Let us know which of the files released in March were your favorites!

Now available, the Halo 5 Guardians ODST helmet! Based on available material for the cut game model, we tried to make this as accurate as possible. Features - Scaled roughly for a 23" head, I suggest checking the scaling in a program or using a scaling slice as it does get tight around the ears due

Never before seen and a completely new model is the 0-0-0 protocol droid helmet! This droid was Darth Vader's own personal droid shown in all black with its red glowing eyes. Features include: 2 main shells that are to be held together by 8x2mm magnets Neck screws with registration keys on the back

“Like a hood ornament” Take to the skies in style with the Rocketeer Helmet. Designed for clean printing, easy assembly, and all the nostalgia. Features • Split for easy printing on standard machines • Includes damaged variant • Fits ~23.5” head at 100% scale • Approx. 15 inches in length -MikeyDooD

Now available is the Spider-Tracer as seen in the Sony Marvel games! This model has many different versions to make it as easy as possible to print and paint. The base scale model is around 51mm wide to give it a great throwable size. Features: 12x2mm magnet hole on the bottom FDM 3 way splits for e

We have another model from Tom_Breg_3D today, the SM-33 bust! If you were a fan of Skeleton Crew, you might agree this is the best droid from the show and thought this model did the best job at recreating all his details. This model features: Smooth Version Textured Version Split for easy printing a

Same people! Less confusion! We rebranded the Patreon a bit to have a better overview of what we do. Originally it was just me, Jawa Brothers Customs, but this Patreon features multiple makers and we wanted to show that. While my brother and I make up Jawa Brothers Customs, we have other guests show

"Get tactical, Marines!" with the all new Halo 2 Anniversary M6C Magnum from our newly featured artist, Swigester Designs! Whether you're going for a hot drop or a silent night, this M6C will have all your Grunt birthday parties covered. Features: Normal M6C M6C SOCOM Ambidextrous version Weapon Sta

Another blaster day! Today from Llambland Prints (LL3D) we have the Covert Westar 34 as seen in the Mandalorian! While only appearing on screen for a short amount of time this Westar 34 with a modified grip and top sights is a great addition to any kit. Features: ▫️ Color split model for easy printi

The Embo cosplay mask is now available! Featuring TWO versions: one based on his animated look and one on the brief glimpse we've gotten from The Mandalorian and Grogu! Features include: - Animated and Live Action variants! - Mask and Face use 8x2mm neodymium magnets to separate - Hat files included

Let us know which of the files released in February was your favorite!

Now available is the Clone Trooper Stealth Pilot Helmet! These guys showed up in one episode in the clone wars series piloting the stealth Corvette but I always thought their look was really cool and unique and figured why not give some love to some clones we only saw once! Features: - Split for 256