💦 CREATE AND FUCK YOUR OWN AI CUMSLUT 🔥 TRY NOW ♥
Create AI Cumsluts 💦
Dragon moon STL file (1 of 6)
Dragon moon .3mf 32.5 MB
Dragon moon (without flat spot).stl 28.9 MB
Dragon moon ornament.stl 29.2 MB
Dragon moon charm.stl 29.2 MB
Dragon moon (with flat spot).stl 28.2 MB
December 6, 2024

Dragon moon STL file

A fairly easy and quick print! MY ABSOLUTE FAVORITE DESIGN TO DATE! There's even a christmas tree decoration version and a charm.

 Please help me get this to go extremely viral! Share it with everyone you know, print it, and post it in every group and on every website! Print 30 of them and give them to strangers! Okay, maybe that’s too far. Nonetheless, please help me spread this around—I can’t do it without you! Word of mouth is the main way we grow this community.

If you’re not yet subscribed, please do so now! Your generosity is what allows me to pursue this passion and continue to provide all of these designs for free for everyone. So you’re not just helping me by subscribing, you’re helping the entire community. ❤️

Comments (10)

T
Troy Rudd · December 10, 2024

I hate asking for help. So much so, I'd rather run 5 or 6 failed prints first. Now that that is out of the way... help? lol The horns keep giving me trouble. Don't we need support for them? If so, what kind? Do I need to use PETG for support material? I did get a good print, and then snapped off a horn, trying to remove tree support. Love the design and will keep on trying! But, any suggestions are welcome.

B
Billy & Katie Hooper · December 10, 2024

😂😂 Sorry you’re having so much trouble with it! 5-6 failed attempts is dedication, lol! Honestly, I didn’t change any of my default settings on my Bambu lab a1 other than using auto tree supports. I used matte black pla and on another try I also used basic black pla and had not issue. I was just careful with the supports. What is the nature of the fail? Coming off the build plate? Layer shifting? Spaghettfying?

D
David Banks · December 7, 2024

I'm about to print the the moon.

C
Claudia McNeely · December 6, 2024

Nice!

R
ROGER KOONCE · December 6, 2024

Done

T
Troy Rudd · December 6, 2024

Haven't opened in slicer yet, but imagining the combining of this with skull snowflake. Maybe drilling a small hole in "roof of mouth", fishing the ornament hanger string though and attaching the SkullFlake. 🤔

B
Billy & Katie Hooper · December 6, 2024

That could be cool! You can do that inside of the slicer by adding negative parts :)

A
Aubrey Pietsch · December 6, 2024

Very cool, love the wash method used to show the details

K
Karli Kehres · December 6, 2024

This is extremely cool!!!

S
Shawn Smith (3D Prints with Shin) · December 6, 2024

That is absolutely wicked 😍