🖨️ TEST PRINT - YOUNG GOJO (WELCOME PACK) 🖨️

The second model to join the lineup of the fantastic Welcome package is a young Gojo almost half dead about to use his brand new techinque "Purple" 🤯

It’s only resin-printed without being painted, but you can already sense the energy flowing through this diorama!

🖨️ Resin Printer Settings:

Both of these printers have been used to print the parts of Gojo, i hope you find it useful my people!

🟢 Anycubic Mono X2

• Layer Height: 0.05 mm

• Normal Exposure: 2.5s

• Bottom Exposure: 30s

• Bottom Layers: 5

• Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)

• Lift Distance: 5mm (bottom), 5mm (normal)

🔵 Elegoo Mars 2 Pro

• Layer Height: 0.05 mm

• Normal Exposure: 3.0s

• Bottom Exposure: 35s

• Bottom Layers: 5

• Lift Speed: 60 mm/min (bottom), 80 mm/min (normal)

• Lift Distance: 5mm (bottom), 5mm (normal)
  

• 📌 Note: These settings work well with standard resin, but you may need slight adjustments based on temperature, resin type, or model complexity.

Huge thanks to @Renaigat_3d for the Test Prints!