NEW DESIGN: Australian Shepherd / Aussie (#98)

We’re releasing a new breed in our realistic flexi dog series — the Australian Shepherd or Aussie (#98) 🐶

The model includes:

• 2 head options: Standard and Happy (open mouth)

• SNAP-fit head connection

• 2 body (tail) versions: Regular and Docked

In the archive, we’ve prepared 3 color variants in .3MF (Bambu Studio) files:

• BLACKTRI — black/white/tan (prints normally)

• REDTRI — red/brown/white

  • For heads with a tongue: assign both red and black to one slot

  • Start with red, then switch to black after that section is printed (or use a pause)

• BLUEMERLE — gray/black/white/tan

  • There is no free slot for the red tongue (all 4 are used), so you can either paint it manually or use a 5th color slot if available

    In our case, we painted the tongue manually

Blue eyes option:
To print the blue eyes, we have specially prepared two heads (placed on a separate plate). On these models, the orange color ends right before the eyes begin.
Once the last orange layer before the eyes is finished, you need to switch to blue (you can either set a pause in the slicer or calculate the timing to swap the filament without stopping the print). After the eyes are printed, you will need to swap back to orange to print the eyebrows.

Please ensure that the heads with blue eyes are not grouped with any scaled bodies containing orange; this prevents the blue filament from accidentally being used on the body.

If your printer supports 5 or more colors, you can print everything without manual filament swaps.

Paid subscribers can find the archive with the files for the new dog in the attachments to this post:
https://www.patreon.com/posts/93014918

We hope you’ll enjoy this new doggie!
Thank you for your support!

P.S. Next design will be a flexi cat.