🔗 Archived Release
This design has now been archived on Patreon and is available on my MyMiniFactory or Cults3d.

It was such a pleasure collaborating with Pawnyca on our first project that we couldn't resist creating another one together!

IDMyron Croissant Pigeon Clicker

Meet the Croissant Pigeon Clicker – a fun little fidget that's incredibly easy to print and assemble!

You'll need to print the pigeon in 5 colors. A 3MF profile for 4-color printers is included, making the process quick and beginner-friendly. Simply pause the print at the indicated layer and swap the dark blue filament for yellow to complete the final color.

Printing Notes

• MX keycap button required

Pawnyca’s Matcha Bun clicker, consisting out of:

• a little foam bunny topper 

• a milky matcha insert 

• a transparent glass bottom 

• and a matching keychain version 

The Matcha Bun does not necessarily have to be matcha-colored either - you can print the insert and bunny in any colors you like and turn it into your own little drink and bun combination!

The clicker is made from three separate parts: the bunny topper, matcha insert, and transparent glass. None of the three parts require supports!

Recommended transparent glass settings:

• Layer height: 0.24 mm 

• Transparent glass: 0% infill and 1 wall loop 

• Ball connector: 15% infill and 3 wall loops 

Apply the ball connector settings separately using the parameter table in the object list in your slicer.

To assemble the bottom, slide the matcha insert into the transparent glass and press it down onto the little ball connector inside. It should snap securely into place. The switch is then placed into the matcha insert, and the bun topper is pressed onto the switch.

Happy Printing!