Early Release: Raccoon!!
***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Use the 50% OFF discount code if you want to purchase it.
Hey Everyone!
This one has been a popular request for quite a while, so I'm excited to introducing my new Raccoon design! There are a few new features on this model that I hope you like. I've designed a new snap-fit head joint to add to my arsenal. There is a new sliding tail joint that lets you move the Raccoon from a standing position to a sitting position without the tail getting in the way.
Check out a quick Demo Video Here!
Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)! Each 3mf contains two head with slightly different color patterns. I also made a separate 4-Color and 3-Color option.
Cheers!
Matt
Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)
(1) Cookiecad Grey Ombre, Eryone Gray PLA, Bambu Matte Charcoal, Bambu Matte Ivory White
(2) PolyTerra Fossil Grey, Ziro Matte Black, PolyTerra Cotton White
(3) PoyTerra Matte Rainbow, Ziro Dreamy Dusk, iSANMATE Red/Blue, PolyTerra Cotton White
(4) Ziro Sunlit Petal
(5) Ziro Pastel Spectrum
To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
3D PRINTING SETTINGS:
Head: Snap-Fit to Body. No supports needed.
Body: Print-In-Place. No support needed.
Multicolor 3MF: includes both 3 and 4 color Multicolor 3MF files (compatible with PrusaSlicer and Bambu Studio)
10%-15% Infill.
3 Walls
This should generally scale down to about 60% with full articulation, on a well calibrated printer. Your mileage may vary.
Check out a quick Demo Video Here!
To Download: Click Here to go to the Pinned "the Hub - Info and Current Download Links" post
***Paid Links. As an Amazon Associate I earn from qualifying purchases.
Comments (50)
I’m new to 3D printing and I chose this as my first real print and it looks so good and so cute but the ball joint on the head immediately split apart when I put it on, is there something I might have missed or did wrong?
Sounds like something isn't working quite right. Are you printing with 3 walls? Send me some photos of the failed area and I'll try and help as best as I can (also send details of what printer, slicer, and basic settings you are using)... help@matmiremakes.com
Hello! Do you mind sharing the filament used for the eye/nose color on raccoon #3? My apologies if it's one of the ones listed - I didn't see one that looked like the eye color. These are amazing! Love every single print of yours that I have done!
it's the iSANMATE Red/Blue gradient, but it looks like its out of stock so the link is taking me to a random other filament. :(
Would love to see this in a Mini
Love how my little guys turned out!!
Works perfect for me on version 2, love it! Can we get this head connection on future stuff?
cant wait for the mini version of this!
Update. Using 2 mm of brim outside only at 0.1 mm distance worked fine and finally the model was printed. Which is awesome. I just found that the head movement is a bit hard. Seems that the head could not fit until the end (could not feel the click this time). So the head moves but very hard.
i made a few at 65 body and 65 haeds did not work I also test it with the head size to. at 66 /66.5/67/67.5/68/68.5/68.7/69 did not work can some one tell the size diff here I lose my mind and filament
Im use a P1s and A1 printers
This model failed 4 times. The tail tiny joints get of plate after 30-40%. I tried to put glue stick that I never had to use on bambu, but failed again, so now I am trying with brim outside. Maybe the pieces in contact with the bed could be a bit larger from beginning.
Pls do a mini raccoon 😅
i aprove :) and dog and cat
I love the racoon but had a balljoint failure when I put the head on. I may have gone to light on build as I did 2 walls and 10% rectilinear infill.
PLA is cheap. Don't cut corners. Also when I assemble the head to the body I heat the head joint with a butane torch to soften it just a bit. Makes for easier assembly.
Hi, beautiful work as always, but I think there is a small clearance on the headstock and ball joints.
Hi! Do you think you could email me with some more details about what you mean? Also what printer/slicer/filament you are using. Thanks! help@matmiremakes.com
¡¡Es muuuyyyy bonito!! Gracias
Cannot handle the cuteness
So stinking cute!! Great job!!
I need to know how you did that multi color raccoon it’s absolutely stunning
Love this now we need Baby ones
super j'attend la version mini avec impatience
Pedro Pedro Pedro
welp i cannot wait for the mini
he just widdol guy <3
OH MY GOODNESS HE IS ADORABLE!!!!
Omg Matt!! Finally!! Thank you!! 🦝❤️
That is SOOO cool. Nice work. Will be on printer tonight
I… I can’t… You gave us ferrets, then opossums, now this?!?! Are you reading my mind?? All I need now is an armadillo, and I’ll have all my favorite animals!!! 😭😭 We honestly don’t deserve you, Mat.
An armadillo would be really neat!
I love this!
Once again, perfect blend of cuteness & realness LOL
Love it!! Do we get a little trash can for him?! 😆
omg so sinking cute !!!!!
Ahhh I can't stand it, SO cute! I have loved Raccoons since I was little and read little rascal as my first chapter book!
THANK YOU SO MUCH MATT!!!!!!!!!!!!!!!
What's the scale factor for this one?
Oops, forgot to add that part. 60% worked well in testing. Your mileage may vary.
Wonder if we’ll ever get an ostrich or an emu or something like that. The ostrich would be great with the coloring!!
I agree with this!! I don’t know how it would be done, but then again, MatMire is basically a wizard, so… 💁♀️
I love it!
This looks fantastic!! Can’t wait for the mini!
This is the one I've been waiting for!!
Omg! I’m in love 😍
This is absolutely adorable! I need one!
A raccoon just came into our backyard as I saw this 😂 lol so excited to print!!
Cute little trash panda!! Thanks, Matt!
This looks awesome 👌