(Aug25 Y+SY Tiers) Rumi Sword
Our first Kpop weapon is finally here!!! Rumi sword took us a while to make as we wanted to make sure we got the light up version to work properly. That said we have a light version and non-light up version for you guys to choose from.
If you do go the route of light up, just beware there is no metal rod so the sword i literally just being held by glue. So i recommend just being extra careful with it.
We did make it hold this switch to turn and turn of the led lights. Amazon.com: DAOKI 20PCS Vertical Slide Switches 1P2T SPDT 3 Pin 2 Position DC50V SS12D10 High Knob Micro Slide Switch with 20PCS Mini Panel Slide Switch ON/Off SS12F15 3Pin Latching Toggle Switch : Industrial & Scientific
Included Features:
-Test printed for quality
-4ft long
-Light and non light version
-Cuts for 256mm and 400mm build plates
-Holds 5/16" thick rod for extra support
-Assembled version for sizing
-3MF Gcode file
Hope you all enjoy!! Happy printing!
Yosher link to files: https://www.patreon.com/posts/yosher-links-and-125142441?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
Super Yosher link to files:https://www.patreon.com/posts/super-yosher-and-125142979?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=postshare_creator&utm_content=join_link
Comments (29)
Do we have the new update for this? This is a train wreck reading all the comments. My daughter would like one of these and been waiting for a fix for 5 months...come on Yosh
Hey John, apologies for the delay. We are going to look into this and try to get it fixed
where can I purchase this file?
The file with the light is completely unusable. Nothing is configured correctly.
I missed this, where can I buy the files?
With the light version, how would you run them inside, there's nothing for them to attach to no?
I noticed the print folders are mix-matched, and looks like only the big printers have a round dowel channel plus pegs.. Not to mention, the post here says fits 5/16th rod (as the big folder matches a round dowel, so I bought 5/16th, and guess what.. it doesnt fit in the blade.. (So either the big printer--> blade_A is larger than the big printer--> light-->blade-A..) For clarity, i put a micrometer on it. shows 1/4 inch.. in the center of blade.. Also, not a fan of the pegs in the handle being in the shape of superman's logo.. how about round or square? As well, both pegged pieces dont sit flush, theres about a 1//16 > gap between each.. Come on Yosh.. this project is a train wreck
I've figured out a way to secure the "light" blades together, but I realized there's another problem. It's great that you have a hole for a switch to turn on the lights, you have no way of accessing the insides once you glue it all together. I feel like there should be a screw option from the guard to the handle so you can charge/ swap batteries.
oh dang the battery!!!! This project is quickly going side ways.. def not prime time. :(
Another observation is that theres not a print profile for H2D, which per the blades, would allow for them to be assembled in 3 pieces, rather than 4, as with (X1C P1S series). However, I did that if i lean it over, (give or take) from the corner-most edge, - X: -86.5 - Y: 51.75 - Z: 59.65 It seems to, (barely), fit on H2D bed.. then i painted in supported on the bottom-most edge that touches the plate, and to my surprise, built supports about 1/3 the way up the blade, noting 6.5 hours.. So.. image theres trade-offs, (generally vertical is stronger) so at a 35-ish% angle, who knows.. Oh yea, stil even the big printer folder for lights, needs some kind of brace for a rod.. that allows for light strips too..
something i noticed about the "light blades", its mentioned that "Holds a 5/16th rod", yet, when I look at the model, I dont see any guides in each blade piece to slide a round or square dowel through.. is it supposed to be wedged in? Otherwise I'd imagine it'll rattle around in there.. As well, it being "light up", consideration for light strip fitment attached to the rod may be ideal. Heck even some "structural" guide / clips (glued to rod), then inserted into each blade piece might help add some blade sturdiness.
I agree. Light blades have no cavity for rods, even in the handle. And nowhere. for the LEDs to mount to!
Hey, seems the no lights version for small beds has the same blade (hollow) as the version for lights? Is that correct?
Thank you for letting us know. We are getting that worked on rn
Wondering what filament brand we should use for it .. 🤔 Any recommendations?
How long of a 5/16 rod does one need?
Get the longest one possible and then use a jigsaw with a metal blade to cut it to size
Hell jeah. My Girls Will love this.
So cool! I think I saw a silk color change pla that would be perfect for the blade
What lights do you recommend for the light up version?
Is there a particular type of filament that would be recommended for the light up version so the light shows up well?
I subbed for this. Any chance of her second sword, at the end of the movie?
People will go bananas on this ahaha
I'm so excited!
What lights and power source do you recommend?
Good question
Yesss, thank you!!
My kids are going to love this
Lessss gooooooo