Articulating Print-in-place CINDER WOLF!
This was a DECEMBER Design and has been Archived! If you were subscribed in December, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in January 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the January Models will be in the January posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CINDERJAN24
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Cinders!
So excited to release to you all my CINDER WOLF design! I worked SO hard to avoid a pop-in head and was able to get it to be COMPLETELY Print-in-place!
The head prints upwards and has been PRE-SUPPORTED - so do not add any supports! I am attaching a video to another post showing how to simply remove the neck support after a print! It's really easy! LINK: HERE
We have tested this wolf between 100% and 60% and it is so fun to play with! It also looks great in a single color filament - making simple and fast prints! I hope you all enjoy this! :)
-Tracy
Filament: https://www.amazon.com/shop/cinderwing3d
Locyfens: Shiny Red Gold Black
Amolen: Red/Black Duel
------------------------------------------------------
DECEMBER Models:
BABY Mistletoe Dragon EXCLUSIVE - RELEASED
Festive Frogs - RELEASED
Cinder Wolf - RELEASED
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (42)
The neck support on this: while it worked great on my Qidi Tech it doesn't work in my bambu. Not sure of the difference
Speed and cooling usually!
what part is the supports and what is not
After two days of time gone and about half a spool of filament, I finally gave up and added tree supports to get past the head. Still looks pretty rough underneath the head but at least it finished and is functional. Even with slow speed and even slower overhangs, it was still a white knuckle experience. I know print in place is cool, but I wouldn't mind a separate head for these models that snaps on to eliminate these issues altogether.
Ender 3 S1 Pro. First attempt, failure at the head joints. Second attempt, slowed everything wayyyy down once it got to the head. 5h7m in, will update. Update: two out of five wolves have successfully printed even slowing down to 20% of my usual speed. For whatever reason three wolves still failed at the same settings the other two succeeded.
you should make a crystal wolf
Printed great on my X1C. Slowed everything down. I have learned slowing the acceleration down helps a lot.
Firstly, I printed this model on Bambu, Aquila and Vyper. I've slowed down the speed on each and id say at least 20+ tries with 1 "ok" print. I've given up trying. The dragon was perfect. Thanks for all you do
I love this wolf!! Unfortunately I’ve had so many fails from the neck support breaking off that I don’t think I can continue to print unless you have advice for fixes? I use a Bambu X1C, I’ve tried on both machines with the same result :(
We recommend going slow for this model, the bambus go way too fast for overhangs on default settings for this particualr model
Ender 3 S1 pro. Have tried .15 and .20 layer heights. This begins to fail on the neck at layers 217/218 and 238/239. The support "ball" contact area is not large enough to allow the head parts to adhere properly and it loses strength. Breaks away a few layers later in one or both of these areas for me. Will try it on a bambu x1 in the next few days for comparison.
So glad to have a wolf! It's the mascot for my daughter's school and I've tried printing wolf models I've purchased from other designers, but none of them worked very well. (I gave up and the teachers got dragon tadlings instead. 😁)
In the process of printing one for my father in-law rn, he loves wolves!! Very cool model!!!
Printed this with Bambu Lab Matte Grey at fine resolution, and it's amazing. I was going to ask if this can be scaled up, but I see someone's already done it at 200%. I'm going to make a big one!
Printed at 200 percent wish I could show you! I’m so excited!! He’s so perfect!!
Join the discord and post!
Hi, I love the design but I cannot get it to print. I have tried 120%, 100%, 70% and 50% on multiple P1S printers and all failed at the neck. No extra supports and running 50mms using silk. Any tips would be apricated.
The important thing is to go slow on overhangs as the neck area is just a bunch of overhangs lol
Yes!!!!!! Printing this as soon as I'm home! Dang work getting in the way! Lol I'm so excited for this one!
Printed it last night. Came out prefect!!!
Am I doing something wrong? the head on this guy keeps misprinting on the lower jaw.
I'd highly recommend tuning overhangs and flow as those both of those are really important to this model
I just finished printing my goodest boy. This one, I’m keeping for me.
Another amazing toy that I won't be able to keep my granddaughter from stealing. 😂
This is seriously cool! Love it!
I LOVE LOVE LOVE this wolf!
🐺💪🏽🙌🏽 now the variations, crystal, forest etc. sooo nice, TY 💕💕💕
nice...nice time to print a pac of wolves.....
💞
Shut up this is awesome! 🤩
Is there going to be a painted version of this coming out?
No, not much to paint really, we try to focus on bigger paint jobs as time permits
OMG!!!!! my daughter is going to FREAK! Love this!
love your work. this is awesome..
💖💖
Pumped to see the variations
;)
Love the wolf! You did a wonderful job! Can't wait to print it
So i assume next will be a cat? :)
With a late entry, I think this will win the “Cinderwing Design of the Year” award!
Love this!! ❤️
Oh! This looks awesome!!!