Ocean Dragon & Ocean Serpent Dragon!
This was a March Design and has been Archived! If you were subscribed in March you will receive an email from MyMiniFactory in the next week to access the archived files from that month. If you are starting your Subscription in April, Welcome! Your exclusive models are available immediately in the Exclusive posts and the April Models will be in the April posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderApril2023 https://www.myminifactory.com/users/Cinderwing3D?show=store
---------------------------------------------------------------------
Hi Cinders!
Excited to bring you the last design for MARCH! - The Ocean Dragon! I really tried to get this to you all sooner but we had some wing hiccups. We had a lot of fun models this month and I really appreciate your patience and understanding in the delay! :)
This design will still be a March only model and will go into the archived library at the end of the month. If you miss this download, please find it and all other march files in your MMF library through the link sent by email at the beginning of next month.
The Ocean Dragon has some really fun features and an Additional Variation! The original not only has 4 legs, but also fan out wing fins and tail! The additional variant design is an Ocean Dragon Serpent that is extra long, same fan out wings and tail, and NO legs! Both are decorated with wave fins, conch shells, and decorative bubble! They have been tested down to 60%, and with bigger prints the wings could come a bit loose so please use a brim if you don't have good bed adhesion.
I hope you all have fun with these and thank you again for your patience being the end of the month. Sneak Peak of April's first design coming soon!
(Made with ZIRO Summer filament - that looks like WATER!)
--------------------------------------------
March Models:
Mushroom Frog -RELEASED
Gemstone Frog -RELEASED
Cinder Frog -RELEASED
Gemstone Baby Dragon -RELEASED
Signature Tadlings Pack -RELEASED
Crystal Mushroom Dice Tower -RELEASED
Ocean Dragon -RELEASED
PLUS All Exclusive Models in the following link: https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
---------------------------------------------------------------
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below:
Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email:
Email (support@cinderwing3D.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins (Jazzy and Turk) and Test Team for all your hard work!
- Tracy
Comments (34)
What's the safest size to print this one at since the wing joints are so small/tight?
Same as the rest, as it was test 60-100%!
cute
We tried to print this one twice and a mess-up happened in the same spot. Not sure if it is us or the print. Anyone else make this recently?
why is mini factory not letting me download the previous files for free? Ive been a member for around 8 months
If they are in your library but show a price, please hover over them or click on them to show the download button. If they are simply not in your library please reach out via contactcinderwing3d@gmail.com or file a Discord ticket.
i cant find this file
This was a March model so if you were not subbed for March you would need to buy it when it goes public! If you were subbed and did not get your archive email from MyMIniFactory please email support@cinderwing3d.com or file a ticker on our Discord (https://discord.gg/cinderwing3d)
Just waiting for this and the dice tower to hit MMF or Cults.
Dice tower is up! Ocean Dragon need a fix but will be following shortly
How do i download it?
I printed the one with legs went perfect. But I printed the legless ones and the left wing failed no brim. The second time with a brim . Same issue left wing gave way. Any suggestions.
same was sunbscribed and still cant download it
Just sent the lists out about an hour ago! If you still do not have access please email us at support@cinderwing3d.com or file a Support Ticket on Discord!
have you uploaded this to the march files on MMF? I don't have the link to it
The March archive has not been distributed yet. We should have it up in the next few days. <3
Hey, I can't download the ocean dragon. Where is the link?
i guess i have to wait just a little longer for these wonderful creations.
Gaps between middle fins/wings are to small and they break when try to move first time.
This one has some tight tolerances. We suggest checking your flow, esteps, and slicing tolerances on your slicer. You can come to the help me forum in Discord over at discord.gg/cinderwing3d
where is the download link for march models????
The MMF emails will be coming out in the next day or two! We have to update those lists wholly manually so it takes a little bit!
Accidentally printing this with no infill… Hope it will work anyway 🤦🏼♂️
2nd - that is a beautiful print. What filament is being pictured
Read the entire description and the answer will be clear.
What filament is that?
Its in the post!
I love the little dots everywhere! A version of the dots concave would make it easier to to paint
Beautiful dragon! Thanks so much for posting filament color!
QUICK CORRECTION to my previous post... the odd artifact ONLY appears while slicing on Elegoo's version of Cura... it's not on the regular one... Thanks Jazzy for the help!
on the normal sized model, there's an odd little piece that's part of the neck (the first piece after the head) it's looks like it's meant to be all one piece, but technically it starts our separate.
Can you send screenshots via a Discord Ticket or the support@cinderwing.com for me please so I can investigate? The model was sound via testing so I'm curious to what you are seeing. I can't do much over Patreon to assist EDIT: The issue was Elegoo Cura being silly.
What length is the model printed out at 100%
18 inches nose to the very tip of the back fins