September Exclusive: BABY Hollow Dragon
Hi Cinders!!Thank you all for being so patient this month! I know it's last minute for the last 2 designs but they are both Exclusives and w
Hi Cinders!!
Thank you all for being so patient this month! I know it's last minute for the last 2 designs but they are both Exclusives and will remain available to everyone who cannot download immediately!
Jolly Roger paint job submitted by Salty
There are three sets of files I'm releasing in the post: The other layouts for the Adult Hollow Dragon (with Resin wings) and the Baby versions (both wingless and winged)! The baby has a different structure and includes feet, however their eyes are the same so you can mix and match Adult vs Baby for them to be whatever you would like!
The other EGGsclusive will be out asap as well (hopefully tomorrow)! We've been working really hard any I appreciate your understanding in these being delayed a bit! :)
September Models:
Harvest Lurker (Released)
Harvest Lurker, Resin and Giant Versions (Released)
Bonus Community MODS (Released)
Spinner SPYder (Released)
Hollow Dragon RESIN wings (Released)
Baby Hollow Dragon EXCLUSIVE (Released)
Secret EGGclusive Design (In Testing)
UPDATE of Original Cinder Snake and Straight Layout (Released)
--------------------------------------------------------------------------------
Please see WELCOME POST for questions and links: https://www.patreon.com/posts/welcome-to-info-71819754
Please join our helpful Discord chat HERE: https://discord.gg/dseyMX94
To get in contact with us via Email (support@cinderwing3D.com) OR faster through a Discord ticket!
Thank you, Cinders for your support!!! And Thank you to our Admins and Test Team for all your hard work!
- Tracy and Richie
Comments (33)
The Cinderwing3D Baby Hollow Dragon Jolly Roger Colors says media file not found when trying to download
This has been fixed
just a heads-up that I can't download the colored version either (Cinderwing3D Baby Hollow Dragon Jolly Roger Colors.zip). It throws a "media file not found" error when trying to fetch it. The standard STL files download fine, but this specific ZIP seems broken on Patreon's side.
This has been fixed
I tried to download the jolly roger colors and it doesn't work
I am also unable to download the hallow jolly roger colors zip.
Seems Patreon is being weird again, I'll mess with it!
when i try to download the hallow jolly roger colors zip it says media file not avab
Is there a colored file? I downloaded it and it was all one color for all the files.
There is not, the picture was just a filament swap
Also has anyone had issues printing this? My bambu is giving me an error code while slicing that there is floating parts and recommends supports. But covers almost all of the dragon with supports. Will it be okay to print without supports?
No issues printing wothout support. Nu slicer also recommend supports but I've printed it without.
So this might be a stupid question, but how do I get at least 2 colors on this hollow dragon
just a filament swap!
I would love the short winged one as well!
I know this is such an old post, but I just recently joined. I LOVE this spooky lil guy! I'd love to see a short version for the winged one as well one day.
I printed the baby dragon at 100% and the wings at 100%. Is there a trick to inserting the wings? Or, do I need to print them smaller?
Might just need to print them 1% smaller based on your tolerances yeah
Is there a adult version?
Yep! https://www.myminifactory.com/object/3d-print-hollow-dragon-241167
I love the design! Is there a multi-color file for this one by chance? Like the one in the picture? Thank you!
That was just a filament change mid print!
I'm having a lot of trouble getting the wings to stay posed. I see the locking mechanism for the first and last folds, but the middle one doesn't seem to have any similar ledge to rest it on so it just falls. Am I missing something, or are the photos just posed with aids like glue, tape, putty, etc? Thank you!
They are held via friction, some filaments will do better then others.
tadlings....what size like to use to connect body n head?
for those printing this in 60% for the "baby" size. I suggest printing the wings with either 99 walls or 100% infil. I broke two of the ball joints before i tried that lol. Looks so cute in the palm of my hand though. my daughter will love it
Can we get away from the winged dragons and make dragons similar to the rose and crystal again? They are both clearly your best sellers and mine as well. These winged dragons full or baby are useless to sell at craft shows because they are too big and bulky on the display and to travel with. Beautiful designs but they aren't practical for me to try to sell. Not trying to be a downer but I've been waiting and waiting for another awesome dragon that is sturdy and non-breakable that I can travel with to craft shows. You did great with the Woodland, the Clover and those types. Keep it simple, it just works!
i completely get that. :) I do try to make "wingless" dragons of most models that have wings as well. For example the Hollow Dragon has a wingless option :)
thats the most unbaby dragon i have seen. i actually think it looks better the the original
really felt like it needed legs as part of this design, but yes because it lacks the eye as well, it can be used as an adult version :) I try to give many options
For this model to be a "baby" do we go to 60% like the others?
omg i hope its the dragon egg you showed all the way back in april. that looked so amazing!
It is different, but I can easily add that in to the collection for next month! :)