EXCLUSIVE MODEL - Coral Reef Dragon
FDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
Comments (25)
Have you ever considering adding colors to this one? I bet it would be so amazing.
Since this is an older model, i dont think she will be!
I sent a private message about my subscription but didn't mean to send it to you. I'm all good with my subscription :)
do you have any tips for getting the wings to not move during print
Clean your bed really well and use brims :)
How come some can be downloaded but others can’t?
As stated in my tier before you subscribe, on subscribing you have access to the Welcome Pack for free with sub, anything not in the welcome pack is purchasable. :) This model is in the welcome pack, so you get to download it. Please take a moment to read the welcome and info post for more information: https://www.patreon.com/posts/welcome-to-info-71819754
Has anyone tested this one at like 60-75%?
All my models are tested between 60-100% :)
I tried to find the filament you said you used but it's not bringing up the right color pattern :(
This was so long ago it might not be around anymore honestly!
I fixed the model, i found 50 degenerated faces and a load of self-intersections and 8 duplicated faces. I love this model! so pretty
Hey there, you can ignore those, they do not affect the print, thank you!
I cannot get this one to slice in Cura. It fails. I've downloaded it twice now. Ideas?
Cura has problems with certain files and I just don't know why. I have run into this problem with a lot of different larger files.
what filliment do you use
Does this need supports? My slicing thing is saying that some of the areas basically would go wrong. What should i do?
No supports are needed
I'm SO excited for this one... my little dragon-loving marine biologist heart is SINGING
Awesome models! How can I show you my prints. They are resin and they look like gummy candy. And they are blacklight active too.
I've struggled with this one. Change machine,infill all I could think of.But the tail fins weight n head ect did not handle.being removed from print plate.
What filament did you use it is beautiful
sunlu silk rainbow :)
Any of the exclusive models that were posted last night different in anyway than the files we already had access to on your site? I don't want to miss anything but I also don't want to download files I already have. Thanks!
All these exclusive files are the same, except the Snake has been updated! These files are no longer available on our website but will remain on here with easy access links from the pinned post! All new Exclusives will remain on here as well! :)