Rose Heart Dragon, with CLICKER TAIL! [ARCHIVED]
PLEASE READ!
This was a JANURARY 2026 Design and has been Archived!
If you were subscribed in JANURARY 2026 you will receive an email from MyMiniFactory within the week to access the archived files from that month. https://www.patreon.com/c/cinderwing3d/collections
1/23/26: UPDATED STL FILES! Please redownload!
HI CINDERS!!!
So how many of you guessed there would be a dragon with a clicker tail happening???? I've been so excited to do this and HERE IT IS! This beautiful dragon came because one complaint I got a lot about the Rose Dragons is that they were kinda pointy? I wanted to make a not pointy rose!!! This one feels closer to a soft bouquet! I appreciate constructive feedback so I can make things like this!
The clicker tail will need a separate clicker keyboard switch! Link below to Pawpular Prints Pawpers, which is my recommendation for my clickers!
There are two STLs, but I combined the 3MF to have both versions!
There is both a clicker and non-clicker version!
- Tracy
-----------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Polymaker Celestial Pink and White
I designed these in mind specifically to use the Pawpers from Pawpular Prints and they were so kind to provide a first time order DISCOUNT! Use the code CINDERCLICKS10 over on their site to get stocked up on clicker switches where you don't have to do any special cutting! I personally recommend them! Other clickers may work but I made them specifically with these in mind!
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Model tested between 60% and 100%, please note that the Clicker version should NOT be resized or the clicker WILL NOT FIT!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
Design Drops - January 2026 Models:
Hearturtle
1 STL
1 .3MF
Tiny Heart Cookie Dragon & Wyvern
2 STL
2 .3MF
Bug Hatchlings
6 STLs
6 .3MFs
Rose Heart Dragon
2 STL
1 3MF
BABY Rose Heart Dragon
2 STL
1 3MF
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (32)
love this! more clickers please <3
I just realized that although I was subscribed in January I never got the email from MMF.
Please privately message me on Patreon thank you
I missed this download, I was subscribed in Jan
If you were subscribed in JANURARY 2026 you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are missing your email please message me directly on Patreon
something I noticed with the clicker is that super thin at the bottom of the tail that the clicker bulges out and Im afraid if used a lot the clicker will actually tear open the bottom.... It seems like it needs to be a few layers thicker to avoid that... I also use pawpular and their bottoms are thicker. We sell soooo many fidgets its unreal... Im really glad you have decided to dive into clickers!! :) Thank you!
That sounds like to me you are pushing it too hard. I did not see this in my testing!
Is anyone else having trouble with the clicker on the dragon. I printed it and I use Pawpular Clickers but it will not go in the rose tail nor will it even connect to the top. It's like the hole is too small for the clicker. Am I doing something wrong?
Did you resize the model?
Yes! Love the dragon with the clicker! The clickers with the discount is also really nice!
Thank you for the discount code link for the clicker switches. Makes it easy to choose, since there are thousands of different clicker switch types out there.
I must be the only one that can't find the link to the clicker file. Can anyone help me?
The 3mf has both!
Has anyone tried any other brands of clickers for these? I still haven't pulled the trigger on buying any because I'm indecisive on brand.
I'd really just recommend Pawpers! They are great folks! Otherwise most brands should work as long as they are cherry MX style switches, you will need to trim them if so!
The clicker is floating in air much higher than the dragon with the stl. haven't checked 3mf that applies to the baby dragon too. One of each before I noticed, I was rushing and didn't check before I sent. I am in the habit of just sending cinderwing models. I will look closer next time :) Love the clicker idea, the clickers themselves are all flat and printing nicely
I already fixed this, just redownload it :)
@Cinderwing does any clicker work or is it brand specific? I'm asking bc i have the Outemu brand and you can kind of see inside. What would you suggest?
Most keyboard switches are standard but you will need to cut the metal bits off the bottom!
I love this soooo much!
So excited to have valentines stuff releasing💞
ohh Can i have just rose heart keychain clicker?
Yep! Its included with the baby!
totally adorable
LOVE the clicker detail!
I can’t wait! This is going to fly!
What an awesome idea I love it
Love it. What about a rose clicker by itself?
It's included with the baby!
Absolutely love this one, great work!
I love it
This is a game changer! 😍😍😍