Tiny Gingerbread Pals! 🍪(ARCHIVED)
This was a DECEMBER 2025 Design and has been Archived!
If you were subscribed in DECEMBER2025 you will receive an email from MyMiniFactory within the week to access the archived files from that month. https://www.patreon.com/c/cinderwing3d/collections
EDIT: FIXED MISSING LOOP ON GINGERBREAD_OOPS, both in the 3MF and STL. PLEASE REDOWNLOAD
HAPPY DECEMBER CINDERSSSSSSSS!!!!
Wanted to start this month off with.... A SWEET TREAT. I LIED! Y'all get more cookies!!!!!!!! I wanted to make some little gingerbread pals that I could use as tree ornaments and whipped these up! Theres 8 different styles to choose from! They all print fairly quick and have 3mfs as well!
For December I plan to really push a lot of the models out earlier in the month so I can spend the holidays with my family! So please expect most of the releases during the start of the month with the latter half being a bit quiet!
Thank you all for your support and here's to another year of Cinderwing3D from me, Richie, and Admin Jazzy!!!!
-----------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Ziro Matte Brown, Ziro Matte White, Epax3D Auroura Green and Red
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! The Tiny Style models generally can go as low as 30% but it highly depends on your printer and how good your settings are!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
Design Drops - December 2025 Models:
Tiny Gingerbread Pals
16 STLs
1 .3MF
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (27)
The one with the knife is my favorite. I need more brown!! I’ve gone through all my brown lately! 😭
I just printed a few of the keychain one and they are so cute! But I have a question.... how do you attach a keychain to it the way the holes are at the top? I'd love to see a pic of one with the actual keychain attached
I called it a keychain version but its more of an ornament version, for like threading a ribbon through. You can always take the regular version and add any size hole you need. Also the photo with two of them has a bead keychain loop on it!
I GOT A GREAT IDEA!! HOW ABOUT YOU DO PETS FOR THE GINGERBREAD MEN!! horse, dog, etc
I am a bit of a beginner so must looking for advice on what I'm doing wrong. These turned out sooooooo cute! Printed great except all of my white frosting is pink. Anybody able to tell me how to avoid this in a multicolor print that has red and white....to not have white be pink? I'm using a Bambu P1s with AMS unit.
check your flushing volumes, you may need to increase the amount that's flushed when you go from red to white.
unless i am missing something they are all STL files no 3MF?
download zip 3mfs in gingerbread all
I downloaded the corrected ooops keychain stl file and it still is missing it's loop, I think it's funny and it's the oops one but it's too cute I wish to print it in one piece :)
This has already been fixed and I sent out a notification about it as well
hello< i didnt get any of the colored files with my download, are they all mono ? i did download both.
3mfs in gingerbread all
The one cracked in half prints with his head not attached was this by plan or an error ?
This has already been fixed and I sent out a notification about it as well
Do we have them in color options? Mine is only downloading as one color.
Please make sure you use the Gingerbread_All.3MF :)
Where do I download this file?
Its attached to the post right at the bottom, just above the comments
On the Oops keychain version in the 3mf file, the head is not attached. It is the same in stl version. Is this something you can fix?
I had the same thing happen, Grateful I didn't start it multi color first lol
Really Cute!!!
So cute. I did find I can only find the coloured ones by opening the ALL file. Which is fine I can just delete the ones I dont want. But I did find that I can move most of them as a whole item except for the two man versions on the first plate. It puts his head and body in separate parts. Which makes it hard to try and duplicate? Is this something that can be corrected, or am I doing something wrong?
This should already be fixed :)
The broken / nibbled ones are my favorites!
This is perfect just in time for our gingerbread event this sunday
Last year one of the kids tried to eat a gingerbread dragon. (In their defense, I WAS baking gingerbread for houses later that day….) Let’s see if I can make it two years in a row! 🤣
Love them