Hatchlings! Dino Pack plus.... EGGS!!! Subscriber Exclusive
Hey everyone!!!!!!!!!!!!
So today I have the next hatchling pack!!! DINOS! I tried to pick dinos for this one that I didn't see a lot of out there! I figured it would be more fun that way, and I'll likely do more dinos in future packs, so don't worry if you don't see your fave! Feel free to leave a COMMENT with what you'd like to see next!
AND WAIT THERE'S MORE! EGGS! I know some of you have been sizing down the normal eggs to make eggs for these Hatchlings so I decided to tweak the egg a bit! These one's are PRESCALED! They work perfect at 100% but may be a little loose/tight at 60% so please be careful! And remember with the lock on the eggs, the filament can matter!
These are STRONG and they have a great WIGGLE! These were also tested down to 60% scale of the file size - just make sure you have your printer settings dialed in if you plan to go below 100%. Each comes with its own .3MF Color File - Thanks to Admin Jazzy! Like all my designs, please feel free to add straw holes, magnet holes, or keychain/earring holes or rings to accommodate your shop needs!
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Will be updated with the filament, there’s just a lot haha
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
This one we do not recommend going below 100% due to it already being scaled so small! All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
Design Drops - August 2025 Models:
Mushturtle- RELEASED
Big Cap Version
Regular Version
(2) .3MF Color Files
Fall Tiny Spider Pack Exclusive
Pinecone Tiny Spider
Autumn Leaf Tiny Spider
Dessert Tiny Spider
(3) .3MF Color Files
Solar Dragon
Winged STL
Wingless STL
(2) .3MF Color Files
BABY Solar Dragon Exclusive
Winged STL
Wingless STL
(2) .3MF Color Files
Dino Hatchling Set
(7) Dino Hatchlings
(4) Different Eggs
(7) .3MF Color Files
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (66)
Can you make a Trex and Spino? :) Thank you! You are amazing!!!!
k, I totally thought you had made a triceratops! I have been searching everywhere, but apparently, I was mistaken...
What is the color you are using for the eggs? The green and yellow with the black and white is really eye catching and I have never seen anything like it! I checked your filament list, but it is not listed :(
I don't remember I'm sorry
is there a 3MF Color File for the eggs? There was not one in the download.
There is not one
what about the original dragonscale eggs as keychains???
amazing!
I am having trouble downloading these hatchlings. I have also looked on MMF and I do not see them there. The only thing I can download is the egg pack, but I need the dinos. Anyone else having this issue?
Hey there, all the files are attached to the post!
Not sure if it has been mentioned but the Steggo / Fan Back is slightly too big for the egg at 100%. If you scale to 95% it fits fine! All the others are a perfect fit!! Love this pack!
It fit ok for me with a little yoga!
Holiday hatchlings would be cool too
Has anyone tried scaling the hatchings up?
They scale up just fine!
These are sooo awesome! Love them, Thanks :)
Is it possible to have 3mf files for the eggs please?
I have a hard time not wanting to cancel whatever is on the printer when the hatchling packs come out 🤣
my son said to ask if you would make a T-Rex hatchling!
how small can the hatchlings get
I've gone 60% as a test
More hatchlings🤤!
so adorable thank you
Australian outback hatchlings pack
These are amazing. I keep looking to see if someone is going to create a pachycephalosaurus. The head butting dino, but these are amazing!!!
Noted!
Love these Hatchlings, they're amazing!!!! How bout a "Farm Hatchlings pack" next!?
OOOOMMMMMGGGGGGGG!!!!!!! THESE ARE THE CUTEST!!!! 🥰🥰🥰🥰🥰🥰
Which one is the Steggo? There is a pix but i don't know where the design is.
Its the "Fan Back"
Love the eggs so much. Would love themed eggs for the other sets!
Also, having eggs for the minis is fantastic! I am always scaling the ones we have down and the threads aren't the best that small. These are perfect! How large can the dino eggs scale before the tolerance is too loose?
As usual I only had the test team go 60-100%!
Wow! These are GREAT! I’m loving ALL the hatchlings! ❤️
I am really excited for these but also curious why you didn't use their dino type for the name? I ended up looking them all up! haha For those who are wondering their types, I believe these are the ones. Snappy Water Dino - Tylosaurus Long Neck Dino - Brontosaurus Flappy Head Dino - Dilophosaurus Flappy Air Dino - Pterodactyl Fan Back Dino - Stegosaurus Ducky Dino - Saurolophus
Because they aren't exactly 100% those dinos! I used the following dinos as inspo! Liopleurodon Brontosaurs Dilophosaurus Parasaur Stegosaur Ptreodactyl
Omg my dreams have come true
totally Love these. Am I missing the egg 3MF files?
The eggs don't have 3MFS :)
Gorgeous and cute and ahhh! I want to make them all now!
Those Dino's look great!! I can't wait to make a bunch for our second annual toy show September 20th-21st
i cant find the files am i misisng something?
They are attached tot he bottom of the post :) Patreon hides it sometimes, you may need to click into the post itself
I’m already putting Halloween tinies out. Need more!
Halloween stuff is coming don't worry!
Is anyone not seeing any 3MF files in the Egg pack??
There arent any!
These are super cute! Can you provide the names of the dinosaurs these are modeled after? For example, I think the one with the elongated head might be a parasaurolophus(?). We sell our dinosaurs by type - brontosaurus, triceratops, etc. - and I don’t want to guess wrong. My dinosaur knowledge is pretty sketchy 🙂
They are loosely... Liopleurodon Brontosaurs Dilophosaurus Parasaur Stegosaur Ptreodactyl I took some liberties here and there tho so its not a perfect 1:1!
Do these scale at 1:1 with the hatching like your normal eggs do with the babies?
Yep!
Amazing work. I've been waiting for the eggs. What scale is required for 5-6 of them. Be nice to sell them as packs as well now.
I'm not sure! I usually stick to one egg per model, but hmmm... Maybe 150%?
Girllllll, this made my day ❤️
love the hatchlings. do all 7 fit in the egg?
Yep!
These are SO cute! My dino lover kid is going to love them! Nevermind my customers!! Love the eggs too!!
These are great. I can't wait to print them. And thanks for the eggs made for the hatchlings.
THANK YOU!!! I know its a around already but a triceratops is needed :P
For the egg with a hole in the front that the Dino is peaking out of, is there a non keychain version?
Yep!
Welp….*gets up, heads to printer* 😅
Me, too!!!
Omgosh these came out amazing!! I love the Dino designs
Love love love and these are going to be a great addition to the shop.
Oh my goodness!!! These are amazing!! Why don’t I have an empty printer right now???