Tiny Peacock! [ARCHIVED]

This was a MARCH 2025 Design and has been Archived! 
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections

Hi Cinders!

Who wants a Tiny Peacock!?  

For the last design of the month I'm releasing this adorable Peacock! It's a quick print for single color, but because of all the colors and swaps, a 4-color print does take a quite a while. These were quite tedious to paint so huge THANK YOU goes out to the following people for taking the time to do so!

2 Color .3MF included thanks to Cinderwing3D Tester ELI!

4 Color .3MF included thanks to Sledge Painter!

As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" comes in where they have been designed with bigger links to be STRONGER and capable of printing at smaller, ACTUAL TINY sizes. :) We test between 100-60% for strength and articulation. This design has been tested between 100%-20% although 20% is fragile!

I hope this design is fun for you all and that you've enjoyed the 7 releases this month! Again thank you for being understanding on the 2 designs I had to postpone until next month; they'll be coming out early next month!

-Tracy

----------------------------------------------------

FILAMENT and Tools:

https://www.amazon.com/shop/cinderwing3d

single color tri: CnaCaiv3D blue green purple

Single color purple: Flashforge Chameleon Blue Pink

4 Color: Flashforge Chameleon Blue Pink, Sunlu white, Flashforge Chameleon yellow green,

-----------------------------------------

All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!

Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!

Print Settings:  .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.

Please join our discord chat below for more help and discussions.

------------------------------------------------------

7 Design Drops - March 2025 Models:  HERE

• Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED

  • Closed Pattern Wings Version

  • Open Pattern Wings Version

  • (4) .3MF Color Files

• TINY Flying Serpent - RELEASED

  • (1) .3MF Color File

• Crystal Snake - RELEASED

  • (2) .3MF Color Files

• Egg Spider - RLEASED

  • (2) .3MF Color Files (Easter and Robin)

• Tiny Bunny Dragon - RELEASED

  • (1) .3MF Color File

• Cat Dragon - RELEASED

  • (2) .3MF Color Files

• Tiny Peacock - RELEASED

  • (2) .3MF Color Files

-------------------------------------------------------

PLEASE READ

Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.

This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.

NO sharing, re-selling, or distributing this digital file or modifications of it in any way.  Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.

---> Please see WELCOME POST for questions, all exclusive releases, and links:  https://www.patreon.com/posts/welcome-to-info-71819754

All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections

Link to the PUBLIC MODELS and Exclusives Full Index List:

Facebook Gallery

Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d

For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!

Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!