New Snake - Crystal Snake [ARCHIVED]
This was a MARCH 2025 Design and has been Archived!
If you were subscribed in March you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH Models will be in the MARCH 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Being the Year of the Snake, I have a new snake for you all: the Crystal Snake!
This is a completely new design with so much wiggle! It's really fun and looks great in many colors! And thank you Admin Jazzy for this incredible .3MF Paint File!
Additional 3mf painted by omegawat
Thank you! More to come! :)
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
single color: DO3D Rainbow
4 Color Blue: Sunlu Black, Sunlu White, Ziro Personality Pure, ZiroGradient Twinkling Flower Rose
4 Color Orange: Sunlu Black, Sunlu White, Stronghero3D Green Forge Blue, iSanmate Gradient Sunset
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
8 Design Drops - March 2025 Models: HERE
Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED
Closed Pattern Wings Version
Open Pattern Wings Version
(4) .3MF Color Files
TINY Flying Serpent - RELEASED
(1) .3MF Color File
Crystal Snake - RELEASED
(2) .3MF Color Files
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, with Active $10 Commercial License Tier Support, you have a Commercial License to legally sell the 3D PRINTS ( Not Files ) created from any of my Designs on any platform EXCLUDING Temu, Alibaba, and any other drop-shipping platforms or services. Example: Amazon listings cannot be supplied by a drop-shipping company. These such violations will be taken down and membership and Commercial License will be revoked.
This License is for YOU to print and sell, not for a factory to print on demand for you. Our goal is to support small businesses.
NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
---> Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (52)
I had this file fail quite a few times. Same issue as some others, it would come off the plate. Though I know this is not typically recommended for articulated prints, I added a brim. It comes off super easily AND successful prints every time.
I do actually recommend brims if you are having issues :)
I was a member in March - how can I get this file??
Please check MMF for your archive emai! If you did not get it please message in via PRIVATE MESSAGE!
Have a Anycubic Kobra Plus, when I printed the snake, two of the links stuck together in the coil, no problem, but when I went to pull apart the top of the snake broke off. Further inspection, I noticed the top of the first 15 links didn't print right. I thought it was my 3D printer or the filament I used but after seeing comments I don't think it is.
It likely layer shifted. If you don't believe me you are welcome to check out the slice for yourself and see that the model isn't fused in any way :)
I saw the crystal snake and the "upgrade" to access button popped up. Followed those steps even though it said archived. I set up my membership again, but I can't find the link for the download. Is it gone? I have never been real Patreon saavy in downloading files in other months so maybe I'm not in the right place.
I'm excited to print these! How long does the 100% come out to be un coiled?
Tried printing this three times now on bambu A1, and all three fail at the top. Can we get a new file?
Using an AnkerMake M5 and it is failing on the top of several of them. Haven't tried again as it's a long print and it's the first 3 sections that failed and not worth the time and filament to fail again. Unfortunately this great model seems to be a no go :(
Print lifted off of plate. Three at 60%. (Fail at tail and mid point at the body with about five hours left) Gonna go cry now because they were beautiful.
I'm getting the same print failure as Anthony mentions. Same thing every print at random times, the print lifts from the bed causing layer shift, and i run a cryogrip bed. 5 attempts, 5 failures..
Same here.. i try 50% and 55 % same for you ?... Maybe that's the cause? I tried with a 3mm edge it's the same thing
I have absolutely no issues printing any of your other models however I have tried to print this one five time now and it fails every single time. Sometimes it fails a quarter way through and sometimes about half way through but it always fails. The problem is that it does not stay stuck to the bed, I understand this sounds like an adhesion problem of mine but it is definitely not I never have adhesion problems with this K1 Max, only with this print. I even printed one of your wolf dragons and a crystal dragon in between fails just to make sure. I tried using the settings you have posted and several other variations to no avail. I think their may be something wrong with this model.
There is nothing wrong with the model. It has more links than most dragons do. Make sure you are using a brim and keeping things slow :)
I'm not a big snake fan, but I made some of these to sell at an event at my middle school to try to raise funds for my fledgling 3d print club and oh my goodness did they sell!!!
I printed this snake yesterday and I am in love! It is my all time favorite print ever. I love the movement, flexibility and overall feel. I'm hoping for more amazing snakes in the future ❤️
its so special to my costumers
It may just be a me issue or misunderstanding but the file labeled as 4 color is only showing up with two colors in Bambu Studio for me. Not really a big problem but just wanted to let you know!
You need to make sure your slicer has 4 colors then bring in the file :)
I keep getting the error "due to the lower version of Bambu Studio this 3MF file cannot be fully loaded. Please update" BUT I have the newest version??
You can just hit ok and it'll load in without issue
printing mine now thank you for all the hard work you put into these
what's the lowest scale it will go. (60%-100%) or can I go lower.
60-100% is the scale that I test in! some folks go lower but anything below that will be up to you and your printer!
My first try on it and it messes up 😭
Baby next?
My mom and I just did a rattlesnake roundup show LAST weekend. Dang it! At least we now have plenty of prep time for next year! I LOVE this!!!
Any tips on using bambu studio? I'm getting an error each time I import the 3MF file and it will install only with one color
Make sure that you open Bambu Studio first, have 4 colors loaded up in the Prepare screen, then bring the 3mf in :)
Awesome I Love It!! Can't Wait To Print It!
Oh! I think this will be FUN! ❤️
Way cool!
the one labeled 4 colors only shows up as one color
make sure your slicer has 4 filaments in the slicer before bringing in the 3mf :)
Oh whyyyyy, why the day I have to go into the office!! Now I have to wait all day to get home before I can put this on the printer 😭 today is going to be torture!! Absolutely love it though 😍
Omg im going to print one now they look like great fidgets!!
Also, baby version with magnets?
Aaawwwwwww so cute!!!
Nice. We love snakes.. and dragons 🤣
Printing now at 100%
Nice! Running it now
How long is it at 100%? On my way home to print one!
70% is 2ft :)
Looks more like the gemstones than the crystals, but it looks great and I'm sure everyone will love it!
I agree with you, looks more like gemstone but still looks nice.
I cannot wait to print this new snake :)
THIS IS EVERYTHING
Omg!!
Yes!!! Love it!!
I love this one!
Oh my goodness! I love this!!! Loading the printer right now!!