Tiny Hummingbird!
This was a FEBRUARY 2025 Design and has been Archived! If you were subscribed in November you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in MARCH 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the MARCH 2025 Models will be in the MARCH 2025 posts tab as they come out over the month! https://www.patreon.com/c/cinderwing3d/collections
If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!
Hi Cinders!
This is a really exciting design release for me! Bringing you all the Tiny Hummingbird! THIS IS ONE OF MY FAVORITE ANIMALS and I just had to make it!
As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" come in where they have been designed with bigger links to be STRONGER and capable of printing at smaller, ACTUAL TINY sizes.
I went through several renditions specifically to test bed adhesion for the wings! I'm happy with where it is at now BUT since it is a taller model, if you do have adhesion issues please use a brim!
I also went a little overboard on the .3MF Color Files! With the help of Admin Jazzy, we are giving you all (6) .3MF Color File Options! We usually test everything between 60-100%, but this one was tested down to 30%!
Hope you all love this one as much as I do!
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Eyes: Sunlu Black & white
Cookiecad witchcraft , Flashforge chameleon yellow/green
Amolen matte duel cyan/chartreuse, Eryone galaxy silver
Locyfens chameleon, Amolen red copper
Cc3d green bronze, Eryone galaxy red
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
11 Designs - FEBRUARY 2025 Models: HERE
Heart Tiny T-Rex - RELEASED - EXCLUSIVE
+ (2) .3MF Color Files
BABY Flying Serpent 2025 Remake - RELEASED - EXCLUSIVE
+ (1) .3MF Color File
Pot of Gold Spinner - RELEASED
+ (1) .3MF Color File
Tiny Hummingbird - RELEASED
+ (6) .3MF Color Files
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (61)
Man I just realised I didn't even save this file 🤦🏽♀️😂
I’ve tried 3 different times and when gets to the head and beak area it stars stringing.
I'd recommend dialing in your overhangs and cooling!
These are super cute!! Is there anyway we'd be able to get a file for either a nest or a cage of some sort? I'd love to pair it together like a pet. 🪹
These are adorable!!!
beautiful print, could we have some more spiders please ideally looking for a ladybug spider..............pretty please xx
I just cant get enough of the humming birds <3
Printed amazing, in love!
I am so happy you made these! I have to say...I was very concerned about the beak with no support, but they came out perfect! I put 6 of them at 60% on my A1 and they are gorgeous! Now I am running a bedful at 50%. BTW...I always do a brim on everything I print. Not so tight that it takes post processing, but I think it helps.
Printed at 50% on an A1 came out perfect, beaks printed very cleanly. This may be my favorite design of all time. My mom is going to love it!
Ok. So I printed 9 at 50%, full color. 36+ hours and I'm not happy the beaks failed on 7. I immediately pulled the plate from my X1C very carefully so not to pop anything, and on the 7 that failed, the feet had come loose. The 2 that were OK were still stuck to the plate. If I bother to try again, I'll add a brim....I guess? Anyone know what setting for the brim not to ruin the feet?
Same happened to me, only 4 out of 16 made it.
any ideas to support the beak, i was think tree support and a support blocker around the body to avoid the wings
I have a feeling she designed the angel, to bee support free, but, if not, tree would certainly be the way to go.
Any suggestions on how to make the beak print cleanly?
Slow down and make sure your cooling is set to max!
I know your prints usually do not require supports, but the beak is failing on these for me. Any thoughts ?
Slow down and make sure your cooling is set to max!
These are so cute!
I usually avoid color prints, unless has very little, but, these are super nice.
Thank you for making this! They are adorble<3 we have a nearby State park that does a Hummingbird Festival and these will be perfect! Can't wait to print these out : )
Really beautiful design, thank you
Oh these are adorable! I love hummingbirds too!
Oh wow!!! These are just beautiful! I have only one artist that has nailed Hummingbirds until now. These are perfectly adorable! Can't wait to bring them to life! Thank you again for your brilliance!
NO WAY!!! <3 Hummingbirbs are my whole online aesthetic! this is beautiful!
These are Awesome! Thank you
Mine doesn't download in color 5 or 6 with color?
Weird, I'm not sure, it's the same as the rest! Maybe try restarting your slicer?
love these!!!!
Love it!!!! Thank You
I absolutely love the design, it's gorgeous! From a painted 3MF perspective, I just wish there were some options that created lest waste. Using default settings, and printing 8 @60% on a plate, I get nearly 300g of purge. Definitely open to suggestions/recommendations to reduce the amount of purge/waste.
I'd highly recommend doing purge calibrations but at the end of the day, they are painted to be like hummingbirds which are doing to be a little complex. That's just multicolor printing for you!
This is nice and something different. I've never seen a humming bird 3d printed
New things take time, and this one has been in the works for a few months to get the overhangs justttttt right! I hope everyone enjoys them!
Ohmygosh! I LOVE these!!!!
Hold please! Pulling my jaw off the floor. You keep hitting out of the park! ❤️❤️❤️
Love love love these
Awesome job. We love it!
Dawww
You do not know how happy this made me! I literally yelled at my kids to come look what just came out!
adorable!!!!
OMG! I love it!
OMG!! No Way!!!!! The hummingbird means so much to me, these are absolutely ADORABLE!!! Thank you!!!!
How cute 🥰
I've actually had people ask me for these! Yay! Thank you!
wow 1d 5h 36m to print 1 little bird and I even shrunk it down a bit.
Omg!! I know what I'm printing tonight!!!
OMG 💕💕💕 Yeah
Awesome! Thank you thank you :)
I love it!!!!!
So cute I’m going to print one now!
The next printer that stops, this is going on it. My mom loves hummingbirds 💕
I love it
And a printer just stopped! Love it!!
I'm excited for this one! And down to 30% is amazing! 🤩
Tracy, this is ADORABLE!! My MIL will love it!
This was my late mother's favorite animal I'm making one for her in her memory thanks Tracy
Ohhh you have made by day!!!!!! I absolutely LOVE Hummy's. Now hehe do I stop whats printing to put one on or patiently wait for it to finish so I can put a hummy on..... hmmm THANK YOU for this little beauty
Oh!!!! These are FANTASTIC!!!!! ❤️ I didn’t know I NEEDED them until I saw these! THANK YOU!
Oh my goodness 😍😍 this is perfect timing for spring! I've been seeing my hummingbirds return to their feeders already ❤️ (also I can't wait to make myself a Flit lol)
My wife is going to absolutely love this