Crystal Dragon 2025! + MEGA! Cinderwing3D THREE YEARS!
EDIT: Updated 300% Dragon so it does not have a weird first layer on the head.
EDIT 2: Want to cut your own? Here's a how to by community member Jiggles!
https://youtu.be/pmw8WsGFGkc
I can't believe it's been 3 years since my first design: the Crystal Dragon!
Our Story
For eight years, my husband and I dreamed of starting our own business. Our ultimate goal was to spend our lives together and with our family, free from the constraints of the traditional 9-to-5 grind. We spent countless late nights fueled by caffeine, brainstorming and working on various business ideas, learning invaluable lessons along the way.
Despite our efforts, my husband continued to work a full-time job while I devoted myself to being a full-time mom. Around three years ago, we discovered the fascinating world of 3D printing and started our own printshop. While operating our print shop, I decided to explore designing—and that decision changed everything. It was then that the Crystal Dragon came to life.
To our amazement, it went viral within a week! That single design not only launched our business but also became a beloved favorite in our community. Even three years later, it remains one of the most popular creations in our lineup.
From the very beginning, one of our biggest goals has been to help others find the same freedom we have by building their own businesses. This vision inspired us to create a subscription model that grants commercial rights to our designs, allowing others to print and sell them for themselves. It’s been such a blessing to hear from people who’ve shared their success stories with us—whether it’s launching their own businesses or using our designs to make a difference in their communities. Some have even told us how these creations have positively impacted autistic children, which fills us with so much gratitude and joy.
We thank God everyday for the inspiration and impact this business has had on our lives and our community.
<<---------------------------------->>
I’ve learned so much since creating my first designs, and over time, I’ve refined features like connecting links and other key aspects. The original Crystal Dragon still uses the original links, which don’t print as smoothly or cleanly as the updated designs.
To celebrate three incredible years of Cinderwing3D, I’m thrilled to release a 2025 updated version PACK of the original Crystal Dragon! This updated version incorporates some of the latest dragon design enhancements while staying true to the charm and spirit of the original.
Yes, you heard that right—PACK! Along with the 2025 updated version of the Crystal Dragon, we’re excited to include a few extra surprises, made possible by our incredible team of testers. Thanks to their efforts, this pack includes (6) .3MF multi-color files and (2) MEGA Crystal Dragon files scaled to an impressive 200% and 300%!
A heartfelt thank you to everyone whose incredible efforts helped bring these fun bonuses to life!
Mega Dragons: Cut by DonumExMachina
Paint Jobs (Alt 1-3): By SledgePainter
Paint Job Colors: By Admin Jazzy
Your contributions made this release truly special!
<<------------------------------------>>
NOTES and Assembly of the Mega Dragons:
200% is on 4 plates and around 800g of filament, should come out to around 5ft/1.5m
300% is on 11 plates and around 2,700g of filament, should out around 6.7ft/2m
Each plate has a cut loop with pegs and a matching loop remainder with holes.
Once printed, you need to connect the pieces together by putting a dab of super glue in the hole part and connecting it around the other link. (It is suggested that you test the loop connection of each piece before gluing it together.)
Depending on your printer the 300%’s pegs may need supports. Highly recommend checking your cooling is at 100%, and recommending crosshatch, gyroid, or 3d honeycomb for infill. 2-3 walls at 5% infill due to the size and scope.
This is a SPECIAL one time thing in celebration of the Crystal Dragon's anniversary and will most likely not be an including thing for future models. That being said we hope this inspires you all to make some mega dragons!
All cuts were made using Bambu Studio/Orca Slicer's cut tools. https://wiki.bambulab.com/en/software/bambu-studio/cut-tool
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
300% Mega: Ziro Rosey Cloud
2 Color: Sunlu White, Mika3D Popular Basic Rainbow (Same as Original Crystal Dragon)
Single Color: Ziro Glacier
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
January 2025 Models: HERE
Baby Unicorn Dragon - RELEASED - EXCLUSIVE
(1) .3MF Color File
Baby Alicorn Dragons - RELEASED
Wings
Wingless
(2) .3MF Color Files
Tiny Snails - RELEASED
Rose Snail
Strawberry Snail
(2) .3MF Color Files
Tiny Rose Dragon&Wyvern - RELEASED - EXCLUSIVE
Tiny Rose Dragon
Tiny Rose Wyvern
Tiny Rose Dragon Keychain
Tiny Rose Wyvern Keychain
(3) .3MF Color Files
Rose & Crystal Fidget Spinners - RELEASED
Rose Fidget Spinner
Crystal Fidget Spinner
Heart Cookie Dragon - RELEASED - EXCLUSIVE
(1) .3MF Color File
Tiny Chocolate Strawberry Snail - RELEASED - EXCLUSIVE
Snail with Lines
Snail with NO Lines
(2) .3MF Color Files
BABY Heart Cookie Dragon - RELEASED
(1) .3MF Color File
Cookie EGG - RELEASED - EXCLUSIVE
(1) .3MF Color File
Skunk - RELEASED
Skunk without Rose
Skunk with Rose
(3) .3MF Color Files
Tiny Butterfly Dragon - RELEASED
Tiny Butterfly Dragon
Tiny Butterfly Dragon Keychain
(2) .3MF Color Files
2025 Crystal Dragon - RELEASED - EXCLUSIVE
2025 Version Crystal Dragon
200% Mega
300% Mega
(6) .3MF Color Files
Secret Design
MOD Bonus
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments (173)
Are there multicolour versions for the 200% and 300%. I could not see them, am I missing something? If they do not exist it would be great if multicolour versions could be added please!
There is not!
New commercial member here. Printing this in red, black, and silver so it matches my whole aesthetic. If anyone asks, it's not a dragon, it's a "scaly business partner." Absolute unit of a model — the katanas stay home, the dragon comes to work. 🗡️🐉
hay evry time i print it it fails
My son would like the 6 foot 7 inch dragon, but I have the Flashforge AD5X. I am unable to print three of the plates for the 300%. Is there anyway you can make a file for the 300% for the Flashforge AD5X plate size? Or is there a way I can print it without the three plates and print extras of another?
do you know how long is the 100% dragon is? thanks!
about 24 inches
Can this be scaled up to 115% with no settings needing to be changed (A1 machine)?
Yep!
How do you get the multi colored file for the 200% dragon? When I downloaded them they are only single color files.
There isn't one!
Have you ever considered making a wall hanger for the large dragon? At the moment he lives above my window precariously sitting on the curtain rod. I've tried finding something to hang him, to no avail. I suck a designing. 🤪
i love it it will sell
with the 300% dragon is there a manual on putting it together or do the bigger pieces go at the front (head shoulder half) and the samller pieces go one the end (tail side)?
The plates are in order of assembly!
One thing I've discovered is that rear feet on the new 2025 dragon often fail using gradient, or gradient transparent filaments, or really any filament that isn't plain PLA filament. And even then it's hard to know.. Since the rear claws are arched, and turning on supports for flexi dragons is a nightmare, I just hold my breath and hope that I get all three claws on both back feet. It doesn't matter which printer I use. I've gone back to printing the original dragon because they don't have the arch under the toes. They print perfectly every time. Do you think you could return the rear feet/claws back to being flat on the bed? I like the new version with the pivoting legs, but too many toeless dragons and the kids notice those details.
I'm not sure I'm following, the Crystal Dragon 2025 only has flat feet. I haven't done arched feet since the Original Crystal Dragon. Are you sure you don't have the files mixed up? It was the last and only dragon that had them
Have you thought about making other Mega dragon versions? I think the Rose Dragon or even some of the Wyvern baby ones would be epic as a mega.
As stated in the post, I do not plan to!
Question son we glue like one plate at a time in order like plate 1 then plate 2 is everything in order to place together?
How do I get a sturdier long tail dragon at 100% and 70%
I'm not sure what you mean, its plenty sturdy as is! Make sure you dry your filament and use the recommended settings
I have to resize down to 88 to fit on my bed will it still work
All my models get tested between 60-100%, so yes
Needing some suggestions, I am trying to print this in the Bambu P1S and the joints are too tight. Would you have any suggestions in settings to resolve this issue?
Check your cooling and overhangs! Since its a P1S, I always recommend opening the door!
We printed at 70%, but the final connector piece isn't snapping together. Is there a way to print just the little piece at 71% without printing that portion of the tail?
Split to objects!
I liked it a lot. 😀😀😀😀. I had no problems. how do you do it?
Is there a straight version of the dragon?
There is not
I just printed the 200% and 300%. Zero printing issues. Absolutely beautiful and painless process. I superglued the connecting pieces together. These are amazing! Thank you! I would love to see more of these mega prints!
Any idea if the Crystal dragon 2025 at 100% has a 3mf to download with the rainbow body and white spikes please? Not in the downloads
Like in the photos? Its just the 2 color with raimbow filament :)
i cant get nowhere near the 800g filament estimate for the 200%. even at 2 walls im at 950g. if i make it 3 walls then i am almost 1150g. and thats at .2 layer, 15% gyroid infill. Am i doing something wrong?
Per the post I recommend 5% gyroid infill :)
just finished printing the 300 % it measures out to 71" long
For anyone who’s printed the 300% Dragon. Can anyone tell me an approximate weight for display purposes?
It'll vary based on settings and filament, the best thing you can do is slice is for an estimate!
Just completed the 300% and I am in love with it!
is there by chance a 300% with wings? I printed the first 300% and would love a flying friend! =)
No, as stated in the post, this was a one time thing! You are welcome to cut it up yourself however!
Has anyone tried a scaled down version 90 or 80%?
It can scale safely between 60-100% :)
Just finished printing the 200% in 1 color and when I sliced it to send to the printed didn't catch it had a prime tower (it had to do with the Timelapse ) and because of that I ran out of filament 15 minutes left on the print lol luckily I ordered a new roll before bed as a just in case and I couldn't wait for amazon to get here today to finish lol
Can this print with a .6 nozzle, or do you have suggestions for how to change the settings in Bambu Studio to ensure it will print with a .6 nozzle?
It should print fine with that
Does anyone know on the 200% crystal dragon if I wanted to make it a bit longer could i print two of plate 3 or would it not connect correctly then?
why not just do the 300% then? The pieces gradually go down in size, so I think it would be noticeable.
My computer said these files could be harmful to my pc.
They are just plain old STLs and 3mfs, it's a false positive :)
Could you include the stl files separately for each?
They are already :)
Can I request an additional body piece option to elongate the body between the feet on the 300 & 200 files? Pleeeease :-)
Is it normal that it just looks like a gigantic blob for me?
Is there any plan to make a short tailed version?
I just wanted to say thank you for your beautiful designs and artistic greatness! You changed my life 3 years ago and finally gave me the direction I wanted to go in my business. If I hadn't found you, I may have never continued to move forward. I appreciate all your hard work!
Can you please make a winged version of this 2025 one? I printed it and realized it was the non winged version. OOPS lol
I have no plans to at this time since the Crystalwing works as is :)
I'm getting ready to print the 200% dragon anyone have any issues with the glue holding the weight of the dragon together. I plan on using a super glue called loctite super glue works pretty well on other filament things I have just wanted to know what glue was anyone using or if they had an issues with the rings staying together with the rest of the weight of the dragon. Thanks
I know it's like a year later... But I used 3D Gloop on multiple of these and they've been solid.
Happy note for all of you trying to get every last gram out of your filament. If you follow the recommendation to print the 300% at 5% infill, the total filament is a little more than 1.8kg, the 2.7kg is with the 15% infill. I bought four rolls, and I am getting two 300% dragons from it! Gyroid, 5%.
Does the 300% dragon require supports on the connectors?
Hi! Is there a baby crystal dragon with wings version anywhere? :)
You have to pay for it :(, But it is a cool model that I paid for and would recommend
Mine wont even let me open it. Im getting a unhandled unknown exception ; terminating the application message whenever I open it up. Ive already tried deleting the file and re-downloading and it still isnt working
What slicer are you using?
I can not wait to print this! My nephew is going to freak out...if/when I decide to give it to him. lol
whats the easiest way to put the rings together, my big fingers don't have much room to squeeze them together. And do you need to use glue?
Yes you need glue!
I've had to fails right at the 60% mark on regular print. Anyone else having any issues?
on printing the part with the dragon head, I woke up to my printer being "paused" like someone had pushed pause. When i tried to resume the print, the nozzle just went to the print and sat there, it wouldn't print no further. It was stopped at about 10 hours with 2 hours left. I had to scrap the part because it would not continue, im not sure if thats what you experienced. But I switched it to a different printer and finished it after starting it all over again.
On a few plates I've had the half ring fail, not sure what caused it... Went back, split to parts, and was able to just print the ring - however, I noticed the dragon part falls apart, like the little pegs just drop to the plate bottom. Can we get a file version that's just the dragon and just the half ring?
You can use the cut tool to split the rings from the dragon. Each ring is specific to each plate so I don't want to add a lot of files and make it more confusing than it already is
I just finished with no support and no brims, Bambu slicer, with any changes on setting, its just beautiful
I'm guessing it's probably been asked already, but I didn't want to look through over a hundred comments, but is there instructions on how to put the 300% version together, or is it just the order of the 11 plates? Thank you.
just start with plate 1 (head) and then the tail is from 2 (starting at the head) to 9 (tail end). 10 plate are the first feets, near head) plate 11 are the feats more to the tail end
OK I ordered 4 rolls to print the 300%. Here's my question, lol i'm new at this. I'll be printing on a bambu A1. Will i need to change anything as you mentioned supports lol. Help a new girl out
I just finished with no support and no brims, Bambu slicer, with any changes on setting, its just beautiful
Has anyone printed the 200% or 300% on Kobra 3 yet? if so, did you change any of the settings and did u have to scale down each plate of the 300% down to 97%?
Where can we get the updated Crystal dragon egg? I have the original that has the older locking mechanism. I'm sure there was a post months ago about a newer version :)
It was already updated back when I updated ALL the eggs :)
I'm doing the 5 ft dragon and I have 2 multi color roll. How will it match the color changes if your doing it in four sections and putting it together. Say your color change is purple blue red on one multi color roll. How will the 4 sections match up. It wont will it?. I hope this makes sense.
Honestly, you are just rolling the dice on it. Make sure each plate is directionally oriented correctly. I don't have the stl pulled up right now but as I remember it it the body sections was oriented similarly enough to get a pretty consistent look... it won't be perfect with the curves but that variance is consistent so it might actually add to the look. If you don't like that you might have to manually straighten the pieces up. Be sure the head and legs are also directionally correct/matching the other pieces direction on the plates. That is all tou can do related to the model and its slice... The other trick is to have 2 rolls that are rolled the same way and are neatly rolled. That can be a challenge. The last challenge is making sure the filament hits the hot end the same way on your load of the second reel when it happens. It could be just luck... or of you are using A1s without and AMS you can note the how the filament is entering the extruder on the first roll Just pull up the the ptfe tube out of the top where in enters the printhead/extruder and take note if the orientation. You can replace the ptfe tube until that reel runs out the when you load the second reel pull the tube again during that process and manually make sure that the filament enters exactly the same way. Even so... the filament could have a twist on the reel or just slowly twist over time as it's loaded. There are no guarantees. This is why solid or multicolor prints might be better that bi or tricolors co-extruded). If you manage to pull off a tricolor or even a gradient over 11 plates you will have reached goat tier. I am printing a single color test run but I am tempted to try a tricolor too. love to here how it works out!.
Thank you so much I loved the mega scale ones did the 200% one in a tricolor now using the mega layout on how the parts were i am working on a 200% scale rose dragon
If I had the filament I'd 100% be making one of the giant ones!
would love to see some of these completed 5' and 6' dragons
Great work I know you are busy is there a chance of getting a 300% head 3mf with the eyes and teeth colored I'm working on the first 300% now and next one wanted to do the multiple colored head.
Its pretty easy to paint yourself! That was part of the redesign, to make it easier to paint :)
I love Amazon. Had to order 3 of the same color rolls of filament. Ordered right after seeing this release on Saturday I ordered and it came Sunday. Even with 2 printers I still have 3 plates to print for the 300% dragon. This is exciting!
Can only do 150% with my flashforge adventurer pro 5, but loving it so far! Only have the head printed. Will be a great display dragon for craft shows!
good to know but disappointing i wont be able to do the 300%
im getting ready to start a 200% but it wont let me put it on my single color printers, what couls i be doing wrong?
What printer do you have? Does it have an AMS?
What about short-tail file?
The short tail file existed due to folks having issues printing the tiny little links on the OG Crystal Dragon. This dragon doesn't have that issue so there was no reason to make one :)
you would of loved the mega lunar dragon I did last year. it was 4 feet and multi color.
When you coming back to MLB ? 😁
Does anyone know how much filament is needed for the 300% Dragon print? Thanks
itll depend on your settings but it'll be 2-4 rolls of PLA
Amazing Story. 3D Printing Changed my life as well! I was a personal trainer, with my own gym, forced out of business by Phil Murphy, during "Covid" lockdowns. Surviving on Doordash, and instacart, I got my 1st 3D Printer, a dream I had for many years, on sale..... It changed EVERYTHING. However, creating art like this, from thin air.... detailed dragons with wings, and teeth and all that. Not a chance. I can barely make a cube.
Great story...My family is right behind your family's tailwinds to do the same!! My daughter has been dreaming of a "HUGE" dragon and I too started to think about how to accomplish this. We're on the wavelength here. Keep it up.
how would the gradient filament stay lined up across multiple plates?
You don't, unfortunately. There's no real way
My PETG version
Happy Birthday 🎂! Your story is beautiful and so inspiring 💖 Here, it's also an adventure I share with my husband, the first printer was his; the poor man doesn't print much anymore 😅 Your success is fully deserved and I am very proud to speak and showcase your work with my clients, you are a true artist 🖌✨️
Can we get a resin printer orientation like with the original crystal dragon?
No sorry!
What is the difference between the 6 3M color files
Load them up and see!
Thank you so much cinderwing you've been rocking this year so far. Happy 3 years & to many more.
300% dragon here I come. I'm so excited! I order the filament yesterday, did some extra painting today, and it's sliced and ready to print pending filament delivery tomorrow. 11 plates, 296 hours to print. Wish me luck!
This looks so awesome!!!
This is awesome! I started setting up a 300% dragon a few months ago, but never got around to finishing all the cutting. Now I can finally get that printed :-)
So excited for my 200% one to finish. Will need to order filament for the 300% one. lol
How long is the 200% dragon?
So much fun this month! Thanks for all your hard work this is awesome
Happy anniversary! I am happy to be here for 2 years thank you so much for so much nice dragons. I also have already mak a 450% large crystal dragen XD
Happy anniversary! I'm so happy to have been along for almost half of these 3 years now. My business started out with your designs, the Crystal Dragon in particular. So thank you for this awesome update! Greetings from the Netherlands
Thank you so much. We love your dragons, and seeing the kids faces when they find their new homes 😊
a dream comes true, already started printing!😍
Congrats on the 3 years. Looks like I’ll be putting the k1 max to use, best get buying more filament…… goodbye Etsy profit 😂😂😂😂
Going by how the model is cut, it looks like we can make the tail as long as we want... I think things might get a bit ridiculous over here lol.
I have one i made set at 494% !!!!! Absolute biggest I could print on the the X1C. Just the head is one plate! Absolutely soooo fun! Now I will have to do it for the updated version! And multi color!!!! YES
Whats the chances of having this in the straight format we had the original in. I have an Idea former ir3 v2 coming and this would be an epic first print. Thanks
There is no chance. They see very little use and I don't have the time to plate the dragons multiple different ways for it to barely be used! Sorry! You are welcome to re-plate it yourself if you like!
Welp. Guess I'm ordering more filament tonight (I just ordered something morning but I didn't factor this in). :) THANK YOU!
This is Awesome!! Thank You for all your hard work.
Looks like it got my printers work cut out for them.
Just curious, will we need to add supports or are they like the rest and print without supports?
Generally no supports but the 300% *MAY* need them on the connection points, as stated in the post!
Congratulations!! So happy for you!!
Happy 3rd year!
Congratulations 🎉 Thank you for the refresh and the mega size one, would make a good display piece for my retail shop :)
Oh big boy. How big was is the egg that would have to come out of?
Happy Anniversary to you guys! Your prints and work is absolutely amazing! It was cool to hear about your back story too. We appreciate all the hard work everyone has been putting into making your prints so successful! I had asked last year about how to split up and enlarge a dragon and you were nice enough to give me the tips to walk me though. But I never did get around to printing it. SOOO guess what just got loaded onto our printer?!?! YES! The 200% one is going NOW! Thank you again for everything!
Kiss my my southern "Gritz" and lick you 3D Lips. I joined Patron CinderWing this morning after buying two CD files, wanting to learn more. And I did, the Chat / Blog / Sharing hopefully gets me out of the "birds nest \: in several of my 6 P1S. Just ordered 16 spools of your colors and looking forward to using the mu.
Congratulations on 3 years! I absolutely love your designs. I'm still pretty new to 3D printing and the MEGA crystal dragon will by far my biggest print ever. I can't wait to start printing. :)
I just bought new colors of filament right in time for this oml... Congrats on 3 years!
Congratulations on your 3 years. I'm printing 6 Pepe Le Pew with roses as soon as that's done. I'm printing the 6-foot dragon. Thank God i just received 20 new rolls of filament.
Of course...I just swapped in my .2 nozzle to print some minis for a buddy!
Thank you so much for all you do @ Cinderwing3D! Sending many blessings to you and your family!
I can't wait to print this
How does one print at such scale? 🤯
Its split into multiple plates!
Congrats on 3 years! Here is to many more years of bring your ideas to print!
Happy 3 Year Anniversary! Our family is obsessed with your designs and of course the dragons! The first thing my kiddos do everyday when they get home from school is immediately start a new dragon, spider, or other critter design that is made from you! We are so excited to see what you have in store for 2025!
Congratulations on 3 years!!
Super excited for this. I have been waiting for this...
do you think there might, maybe, be a multi-color mega release? or is it there and i'm not seeing it?
Its fairly easy to paint yourself! This dragon was re-done from the ground up, including easier to paint crystals :)
So am I figuring it right? Like 8 rolls?
the 200% will be about 1 roll, the 300% is about 2.5/3 rolls
Oh boy, thought mine at 50" was big. Guess I get to go bigger on he next one
Hell ya!! Congrats on 3yrs!! And heres to many more years of designing amazing creations and many more years of marriage and success for you and your husband and kids!!! 🎉🎉🎉
Thank you so much for sharing your story, it's so beautiful and I loved reading it.
wow wow wow
That’s wild!!!!
OMG I am sooooooooo excited!!! I have been wanting this mega file forever!!! Thank you so very very very much for making it. Happy 3 year anniversary
An absolute unit of a dragon can't wait to figure out what filament im going to use for this
Another assembly tip for holding the joints together while glue sets- you can stick some tape around the small piece, extra long so it give you some "handles" which allows you to maneuver it easier, and gives more leverage when you're trying to engage the joints!
Oh. My. Gawd! A mega crystal dragon? WOW! I am definitely going to find the time and filament to print at least one of these. Also, congratulations on 3 years of the Crystal dragon! 🥳🎉🎊
Holy cow!!! How in the world!!! My eyes bugged out. LOL
Now the question is what's the best way to slice up an egg to fit it lol
LOL OMG
I am stoked and terrified to print a mega dragon!
This was our first mega print too and it is surreal holding it! it's amazing!
Just me running to the printer 🏃♀️
Omg i can't WAIT TO PRINT THIS!!
I'm new here, but you have definitely earned it. It took me days in to my 3D printing journey to find you, and I've been absolutely LOVING your designs. I'm so excited to see what you have in store for us!
Zomg I just finished making a 300% crystal dragon! I'm sure this one is much better than my cut job.
Can't wait to start printing the huge ones when the beds are done today. They are gonna be sick
😱